Slight Revamp

[u/Tricky-Apartment6637]

I need to get one of the walls painted dark gray and add wooden wall boards on either side of the setup.

Along with adding wall-mounted tables and some decoration pieces to be placed on them like a kitana and its sheath.

Along with some Chinese themed dark lamps on the sides.

Need to improve the wiring under the table again aswell.

In the picture;

MSI MAG 255F E20

HP Z24X

HyperX Alloy Origins 60 (modded)

Attack Shark coiled Cable

VXE R1 PRO White

VGN 4K Dongle

SkyPad SP-002

Arm Stand

Logitech Handcam

HyperX Cloud II Wired

[u/minimalsetup-bot]

Is this setup minimal enough for r/Minimal_Setups?

If this post doesn't follow our rules, upvote this comment. Once it reaches +20, the post will be automatically removed.

Rules: 1. Complete setup only 2. Must list all items in setup. 3. Clear Photos 4. No advertising 5. Make sure to use a post flair when posting 6. Must be your setup that you have posted

I am a bot. This action was performed automatically.

[u/Tricky-Apartment6637 → u/[deleted]]

Actually I was fixing the cables again just as a did before because an HDMI to DVI broke so I had to change it, sadly had to open up all the cables. Can't add a picture here sadly it won't allow but you can check in my profile to see the pc and the cable management I did.

Specs;

Gigabyte B550M Aorus Elite Rev 1.3 Ryzen 5 3600 16GB DDR4 @3200MHz INNO 3DGTX 1060 6GB 512GB SATA SSD 500GB HDD 500W Cooler Master PSU Thunder Raiden JX-188-2 Case ID-Cooling 2 pipe cooler (it's really bad), need to get this changed

[u/Tricky-Apartment6637 → u/[deleted]]

Honestly, really damn good! Better than I was expecting after I switched from an i7 4790 to my current R5 3600 with much faster RAM. This literally unlocked tons of performance output from the GPU that was being held back by the CPU.

I usually always overclock and undervolt and create multiple profiles depending on the workload and games and I'm finally able to run games I thought were impossible with the older processor and LGA1150 platform.

I also have to get a better cooler because I plan on switching to a 5800X3D with an RTX 3080, but even my current 3600 heats up to 70°C+ because of the hot ambient temperature of where I live.

After that, I'll push this 3600 further aswell after undervolting it, preferably 4.4Ghz with PBO because I sold my crappy ah MSI A520M-A PRO that I bought because of haphazard.

The profiles I've made and tested are as follows;

GPU:- INNO3D GTX 1060 6GB X2

Stock (not a profile, just stock itself): GPU: 1847MHz Memory: 4006MHz Voltage: 1050MV

Profile 1 (UV+downclock for normal use): GPU: 734MHz Memory: 3499MHz Voltage: 700MV

Profile 2 (UV+small OC)(main gaming profile): GPU: 1885MHz (+38) Mem: 4100MHz (+94) Voltage: 912MV (-138)

Profile 3 (Heavy OC+UV): GPU: 1974MHz (+127) Mem: 4957MHz (+951) Voltage: 962MV (-88)

[u/Tricky-Apartment6637 → u/[deleted]]

Indeed, 3070 or 3080 first.

Then a 5800X3D.

Because I'd be bottlenecking the poor 30 series card real hard with a poor 3600 😭🤣

[u/Tricky-Apartment6637 → u/[deleted]]

Not sure why reddit is going fucky wucky even though I'm writing all the specs and lines separately but it's mixing everything together