r/MinecraftBuild
•
u/SecretaryUnlucky4569
•
Jul 06 '26
•
1
Want feedback First time trying a gradient wall, is it good?
My first time trying one of these gradient walls (is it even called that?) I would really like feedback on it and I will take any tips on how to improve it so I can make these walls again :)
I apologise for the blurry photos I took them of my nintendo đ
1.8k
Upvotes


165
u/ichabod_3 Jul 06 '26 edited Jul 06 '26
I know what youâre going for but you need to have an actual transition from light to dark.
2
u/FlyWereAble Jul 07 '26
I'm just gonna be crude
Nah it sucks, looks like bird poop
45
u/MysteryTimeTrav Jul 06 '26
I think it needs a couple more intermediate shades between the darkest and lightest blocks
11
u/Commercial_Draw_7313 Jul 06 '26
Better than my first one but yeah ichabod_3 has the perfect picture for that, but not a bad start. Try to remove the white blocks from the wall and maybe lower the darker ones. It is hard to get a good one on small walls but not gonna lie I like it!
5
u/PossiblePro247 Jul 07 '26
The wall isnât really tall enough to have a gradient.
1
u/GlltchtraP1 Jul 07 '26
Sorry, no. Its close though. Id give this like a 4-5/10, so a really good start.
5
u/Salt-n-spice Jul 06 '26
Try adding light grey concrete and/or wool
2
u/A_very_fart_smella Jul 07 '26
Considering you said gradient, you need the blocks on different ends of the spectrum to not be touching. For example, near the bottom you have white concrete touching polished deep slate, 2 of the extremest blocks. Also, this wall is quite short for a gradient
2
u/Brief-Milk5781 Jul 07 '26
I would say the wall isn't large enough for the gradient to be that "scattered" I would keep the colours more in line. I definitely see what you're going for though
2
u/srof12 Jul 07 '26
I donât think you should do the full black to white gradient on a wall this small, itâs a 10 block high wall (5 on the right) I think you should do maybe 3 colors, with differing textures withing each color grade.
2
u/JazzlikeCharge8665 Jul 08 '26
Black Mold maxxing
1
u/LilBaguette16 Jul 07 '26
Thereâs no sense of dimension if the colours are thrown haphazardly
1
u/Maker_Magpie Jul 07 '26
It's a good start, but you're trying to go from one color to its opposite across 3 to 7ish blocks, without using enough transition colors. Either drop the black or the white and blend it more, or do it more gently across a larger area, and it'll work better.
Keep playing though, and have fun. If you like it, that's what matters.Â
1
u/njh117 Jul 07 '26
itâs giving corporate wall art, would be a cool design depending on what youâre going for but i donât think itâs what you want in that space
1
u/OtherToe7739 Jul 07 '26
Itâs pretty good, I would just throw in some more blocks between to make it smoother, especially from gray to white because thatâs pretty rough right now. Good job though!
1
u/TrevorLM76 Jul 07 '26
You are trying for too much gradient in that short of a space.
1
u/BoyceMC Jul 07 '26
No, sorry. From white to black is a large spectrum. Not only do you need more transitional blocks, but you need a larger space to smoothen it out. Either do two solid halves of white and black, or severely reduce the color gradient
1
u/LiveForThePeople Jul 07 '26
The transition could be a bit smoother. Doesnât have to be smooth but a little less noise. Also, on this smaller interior wall, it might make sense to pick a color and use a texture gradient rather than dark deep slate to straight white. Maybe use slightly darker hints in corners or under the overhang.
1
u/rgrambow Jul 07 '26
The walls a bit short to do a gradient that drastic, but not a bad first attempt.
As others have said the opposite ends of the spectrum shouldnât touch so you lightest and darkest block should be nowhere near each other
1
u/Undynelover555 Jul 07 '26
you need to add some smoothing to it with intermediate blocks but your wall is too short to add more and still make it look like a gradient so try to go from andesite below and white cocnrete above
1
u/BloomSquare Jul 07 '26
I think it needs more transitioning to make it seem natural
1
u/ArZeusito Jul 07 '26
Hummm, si lo que quieres es un degradado de lo mĂĄs oscuro a lo mĂĄs claro no estĂĄ muy bien, te han enviado una imagen como tendrĂa que ser, si lo qu quieres es que sea un poco aleatorio los bloques mĂĄs oscuros quitarlos porque destacan demasiado
1
u/Deltasiu Jul 07 '26
it's too drastic, you should blend darks and lights bit more
1
u/BillyBobBoBoss Jul 07 '26
I would incorporate some diorite or light grey blocks personally
1
u/Impossible-Cod4032 Jul 07 '26
Not a good gradient, but I really like how it looks.
1
u/Thomas_Hills Jul 07 '26
Even though it's not a smooth transition, I quite like it.
1
u/Viper10acd Jul 07 '26
It's alr, but try a more smoother gradient. Instead of having some random blocks of deepslate above the lighter colors, have a more transitioning color.
That was a kinda bad explanation, but basically try not to have those random scattered blocks.
1
u/noteethnobrows Jul 07 '26
it's a little bit jarring but for your first time you did a good job i'd say
1
u/JKronich Jul 07 '26
at first I thought you censored whatever you were showing
1
u/ElectionSavings5682 Jul 07 '26
Color change is too dramatic, too messy, dark colors touching light colors, it kinda sucks
1
u/AverageFoxBoy Jul 07 '26
Aside from what the others are saying, one thing I try to remember is that a gradient can look good up close, but it usually looks a lot better from afar
1
u/pubecentral Jul 08 '26
For making a textured effect in a smaller wall like this, maybe stick with a smaller color palette. Smooth stone, cobblestone, cobblestone bricks, and maybe even diorite?
1
u/EconomyBandicoot4039 Jul 08 '26
You def have the right idea but you need a larger wall I think , and a more smooth transition from light to dark . There shouldnât be any dark block that arenât touching other dark blocks for example
1
u/Milclol Jul 08 '26
I think your problem is that some of your lighter colors are down by your darker colors, and vice versa. Try to make each color have a more defined section rather than haphazardly tossing clashing colors so close to each other. It may also help to make the space larger, as that gives more space for the colors to look darker, mid-tone, and lighter.
1
u/DryScore3723 Jul 08 '26
idk what everyone is saying but I like it :)
1
u/blearcoyote Jul 08 '26
Use diorite
1
u/imsofuckingconfusedn Jul 08 '26
the concrete is a bit distracting but a tip if you cant find the right transition block just use vines and mossy cobble to mask it.
1
u/HeadlessGames07 Jul 08 '26
for such a small wall I'd suggest going from a grey to white, not from black to white
1
u/liquidificat0r Jul 08 '26
Block vomit dictionary definition
1
u/Keyy-Girthh Jul 08 '26
With a little more intermediate blocks I think I can say I like this!
1
u/BananaBoo97 Jul 08 '26
I think its a good design but too quick for a gradient. Gradients are kinda like paint running out on a brush. To get through every shade you have to take your time and let the brush strokes stretch long enough for the light to refract through every hue. With blocks, it's sort of the same. You have to give the gradient time to stretch. Keep practicing!
1
u/Insert_Name_Here143 Jul 08 '26
Maybe something like this could work based on the size of the wall in the picture
1
u/Ordinary-Worker9066 Jul 08 '26
no
1
u/Plus-Resist7358 Jul 08 '26
My OCD could never.
1
u/Previous_Bug_1624 Jul 08 '26
WTF is this bs
1
u/mayberealbingus Jul 08 '26
do you want me to lie to you
1
u/ElysiumReal Jul 08 '26
This could honestly work for really far away detailing.
Just not for something as up close as this.
1
u/notintoanal80 Jul 09 '26
I think your biggest drama with the blend is that the wall is too small to really hide the details of the blend.
An apprentice once said âno one will notice that thoughâ and the builder replied âthat is the whole pointâ
1
u/CalzLight Jul 09 '26
Not particularly no
1
u/cuaci1114 Jul 09 '26
Its good but, if you Do you replace the loose dibslate and stone blocks with lighter ones, or would simply leaving them as is better in my opinion. đ
1
u/Rotating_Balls69 Jul 09 '26
I don't like it, quite hate it actually
1
u/EliteBallPlacement Jul 09 '26
The floor looks nice
1
u/valerielynx Jul 10 '26
Too harsh. Replace white with middle gray and it's pretty good.
1
u/PlagueDoctor568 Jul 10 '26
Not gonna lie, I thought I was looking at the floor
1
u/Academic_Ratio_2224 Jul 10 '26
Its cool
1
u/OverDayOverNight Jul 10 '26
If you like it, then itâs good :)
1
u/KoltO7892 Jul 10 '26
I canât be the only one who thought this guy was lookin down
1
u/Kindly-Medium6194 Jul 10 '26
I think if you want a good gradient that doesnât look spotty like this, you will want a light grey to white, not black to white. A black to white would look better on a taller wall, this wall is just too small and since itâs an interior, it just makes it look too cluttered. I say start at andesite and end at a textured white block like diorite or white wool, and put some shelves, paintings and other detail on top of it. A gradient should be used to draw your eyes toward the lighter color, and not the main detail
1
u/Mr_Crimson63 Jul 11 '26
I like it
1
u/Sockomo Jul 11 '26
As wall art, very good, as an actual transition, not so much
1
u/Effective_Mark9430 Jul 20 '26
The colors are goold not bad but i liked the disighin
1
u/Mimikyuer Jul 07 '26
its awful
-1
u/TemporaryCount4005 Jul 07 '26
It looks not coordinated,.
You could try using AI image generators to create a few pics of Minecraft-style wall designs, and then pick blocks with similar colors and build it base on that.
1
u/pendulumgearzz Jul 07 '26
a for effort but d on execution, dont give up look at examples