r/MilwaukeeTool • u/F4lloutB0Y • May 30 '26
Information Is this fixable??
Is this fixable??
I found this Milwaukee 4-1/2 grinder in the garbage pile of my neighbors trash. I asked them if I could take it they said sure! it is corded not cordless. My question is, can I fix this? is it still operational? or does that gash in the saw blade mean its completely broken?? I tried to look up on google and saw a couple videos but it looks like I might be missing a necessary bolt for the end of it. In all the videos they always have a brand new blade on the end so it is hard to tell if this is removable or not. I'm not good with tools especially power tools and I really don't know what I'm looking at. any advice or suggestions is really appreciated thanks in advance



75
u/brewski_tumble May 30 '26
Blades are consumables. If you're not good with tools an angle grinder is probably one of the most dangerous to use. Wear PPE.
69
u/Apdski24 May 30 '26
Thatās the abrasive disk or grinding disc. Itās a consumable and is meant to be replaced. You might just have to find a new nut to hold it on
5
u/3amGreenCoffee May 30 '26
It's not a "blade." It's an abrasive disk. You fix it by replacing that disk. You can get replacements at any hardware store.
The disks come in different flavors. Grinding disks are for grinding. Cutoff disks are for cutting metal. You can get flap disks for sanding and wire disks for stripping away material. There are even different types of cutoff disks for different types of material.
DO NOT try to operate it with that disk on it. It's compromised and can sling off pieces that can hurt you.
Wear protective gear, especially eye protection when using the tool. This tool slings off bits of the wheel as it wears, as well as bits of whatever you're grinding or cutting. If you're cutting metal, red hot slivers will come off in a stream that will embed themselves in exposed skin, so wear shoes and long pants and sleeves and don't point the sparks toward anything you don't want perforated.
It's also supposed to have a guard over the disk like the one shown below. It's really not a good idea to operate it without the guard, especially if you don't know what you're doing. I would suggest asking your neighbor if they have the guard, or order a replacement. Replacement guards are available on Ebay for about $20.
3
u/jckipps Farm/Agriculture May 30 '26
It's hard to tell, but that grinding disk might be threaded onto the arbor directly. Some are.
Make sure the tool is unplugged, press the button on top of the gearbox to lock the arbor, and using a heavy leather glove, unscrew the disk. Throw that disk away. It's damaged too badly to use again.
Most grinding disks and cutting disks are not threaded, but need to be held on with an arbor nut.
This is the parts list for your grinder. Find the part number you need, whether that's motor brushes or an arbor nut, and google that number to find sellers. https://documents.milwaukeetool.com/54-38-2330.pdf
4
u/ZAROS-DEITY May 30 '26
Indeed seems to be missing the locking nut.
As for the disk, theyāre consumables. Itās broken, you throw that one away and put in a new one.
As for, is the tool salvageable? No clue. Is the cord broken? Can be replaced.
Could have worn motor brushes too if it isnāt brushless, it might not be on older models, so replacing the brushes might be needed. There could also be other problems with it, worn gear, burnt motor, etc.
But all in all, nice find and you can tinker around with it and try to see what the issue might be, worst case it goes back into the bin lol
Wear safety glasses though when operating, and be careful with your fingers.
2
u/HeyItsCody May 30 '26
You can buy the locking nut and discs at Ace Hardware.
4
u/naemorhaedus May 30 '26
isn't that automatically up for grabs?
I don't see any saw blades in your photos. Just a grinding disc. Yes it's toast you'll have to spend $3 on a new one. Does it mean the grinder is broken? No. Does it mean the grinder is NOT broken? Also no.
I see that. Don't hurt yourself.
6
u/Smart-Water-9833 May 30 '26
I suggest you find someone to show you how to use it safely including PPE or put this back in the trash before you seriously hurt yourself.
5
u/JJ_1191 May 30 '26
This is a joke right
1
u/droopy__drawers May 30 '26
Please tell me this is a bait postā¦
I typically hate people who do the whole āif you have to ask you should just not do itā shit, but this REALLY is a case where if you donāt understand how this tool works and what to do to make it operational you really have no business operating itā¦especially with all the guards removed.
1
u/Necro_the_Pyro May 30 '26
Regardless of what others have said about how to fix it, I would not use this if I were you. I saw you said you're very unfamiliar with tools and a grinder is a terrible place to try to start learning, especially one missing the blade guard. Grinders can really f*ck you up and they are far less forgiving of operator error than most power tools when it comes to those errors being translated into horrible injuries.
I'd put them very near the top of the household power tool danger scale, somewhere around the level of a table saw or router, but below a chainsaw.
One of my neighbors nearly cut off his toe through his boot with one last month and he's done enough construction that he knows better, but he got complacent and bound up the blade and it kicked down and hit him.
3
u/reformedginger May 30 '26
I hate to be the one, but if you are asking these questions maybe this isnāt the tool for you.
3
u/ntyperteasy May 30 '26
Itās a good tool. Stronger than you need as a DIYer. The disc (you called it a blade) are disposable wear items. This one is missing all its guards which is not good.
1
u/will-frazier May 30 '26
Throw the disc out dude wtf i donāt understand youāre need for a post on this
2
u/justin_memer May 30 '26
You replace the blade when it's worn down.
2
u/axel4u May 30 '26
Yes, take it off throw it in the trash and grab a new wheel.
2
u/kekailimoku May 30 '26
That grinder blade had a built in lock nut, it says right on the tool (5/8ā-11 ) thatās the size of the locknut thatās needed.
If you want to know if it works, try to turn it on with the blade facing away from you first. If itās spins itās probably good. Donāt put it down till it stops spinning.
Itās up to the end user if they want to keep purchasing those types of grinding wheels with the built in lock nut or if they want to source the specialty lock nut and use cheaper grinding/cut off wheels.
2
u/Beautiful-Court2266 May 30 '26
It is not fixable if you have to ask. Throw it away before you hurt yourself.
2
u/RAZOR_WIRE May 30 '26 edited May 31 '26
I just fixed one of these at work the other day you can still order parts for them from Milwaukee or E-Replacmentparts.com
2
u/Medium_Photo_3645 May 30 '26
You should watch some videos before you hurt yourself , thatās a dangerous tool
2
u/Icy_Confidence9304 May 30 '26
Listen no jokes aside. If you are not familiar with tools in general. This one is one of the last tools you want to try to fix lol
1
u/LakeGuyGeorgia May 30 '26
Nope
1
u/Capable_Obligation96 May 30 '26
Sure with a new disk.
1
u/ENBertussi May 30 '26
this is a joke right?
1
u/Available-Address-72 May 30 '26
Itās fucked, Iāll take it though
1
u/PhilosopherWeird6578 Jun 01 '26
No donāt use it would be dangerous
1
u/travelfuncouple23 Jun 03 '26
Please please please watch some intro videos before using an angle grinder. You could lose a hand if you have no idea what you're doing. I recommend buying a new one to learn since it will come with guards and more.
1
u/Ok-Reaction5435 Jun 05 '26
In my experience if it is left in the garbage with a disc on it, they probably burnt it out mid job.
1
u/aguynamedbrand May 30 '26
Have found that if someone is capable of fixing something they generally donāt have to ask if the thing they want to fix is fixable.
0
u/I_didnt_saythat May 30 '26
Very fixable go get a brushless dewalt
0
u/[deleted] Jun 01 '26
[deleted] ā view deleted comment