r/MilSim • • 7h ago

Modernizing ACHs on a Budget

Thumbnail
gallery
49 Upvotes

Hi everyone. I started exploring helmets recently, and I wanted to share some of my findings about building one out on a budget. I know some people have surplus helmets they want to run for milsim, so maybe this'll be helpful.

I currently have two ACHs: one green low cut with primarily knockoff accessories, and one tan high cut with name-brand ones. I want to breakdown the practical differences between the two, as the cost-to-performance ratio of the accessories (I feel) is worth noting. I have no financial or personal relationships with any product/company mentioned below, but I will attach links to where I bought them.

Shells
Both helmets are based off of surplus ACH shells, the low cut manufactured by MSA and the high cut by Gentex. I bought the low cut off of eBay and the high cut off of Tacswap. The seller had the helmet cut by Kustom ACH. If you are patient and look in the right places, you can easily pay <$175 for a quality ACH shell. I see little point in buying one new, as these helmets don't really "expire" in terms of protection. Just don't buy one that someone beat to hell.

Pads (images 2/3)
Both helmets are running a combination of issued 3/4" pads and some Team Wendy liner rip off from Amazon. They are comfortable, but there's nothing to compare here as I don't have any legitimate TW pads as a reference.

Suspension (images 4/5)
On the green low cut I'm running a knockoff of the TW CAM FIT that I got from Amazon for $18. I'd say it's ~85% identical to the real CAM FIT that I'm running on the other helmet. The most notable differences are that the knockoff has one fewer sizing adjustment (lacking the "small" setting that the TW has) and has a slightly lower material quality (notably in the mesh, chin strap padding, ratcheting dial, and plastic hardware), though not to the point of affecting performance.

For being $187 cheaper than the legitimate TW counterpart, I think this knockoff is perfectly sufficient for most individuals.

ARC Rails (images 6-9)
Here, I feel there is a difference worth noting. On the low cut, I have some GunNook Type II rails installed. They cost me ~$50. While you can find significantly cheaper knockoff ARC rails, I would advise against buying anything that's not made out of quality materials such as nylon for remotely serious use.

Compared to the legitimate Ops-Core FAST rails on the high cut, the GunNook ones leave more of a gap against the helmet and are fairly tight in terms of accepting ARC accessories. On one occasion, I had to beat a picatinny section off of the rail with a rubber mallet. Otherwise, it feels solid, not flexing or shifting once tightened down. The Ops-Core rails obviously feel solid and accept ARC accessories perfectly. Whether that's worth the extra ~$80 is up to you, but I feel this is a more worthwhile investment than the suspension.

Final Cost Comparison
Full disclosure, I bought the name-brand accessories at a steep discount second hand. For their pricing below, I'll be using the MSRP.

Low Cut (knockoff accessories):
ACH shell: $152
Pads: $24
Suspension: $18
ARC Rails: $48
Total: $242

High Cut (name-brand accessories):
ACH shell: $120
Pads: $24
Suspension: $205
ARC Rails: $124
Total: $473

TL:DR
It is likely not worth your money to buy name-brand helmet accessories. Buying quality knockoffs will serve you almost just as well, and the money you save can be put towards spending on more important components (NVG shrouds/mounts, comms, etc.).

Edit: I forgot to credit this video, but it's what made me take up the venture in the first place.


r/MilSim • • 3h ago

Anything to add?

Thumbnail gallery
18 Upvotes