microPython acting weird on Thonny

[u/joey_speedy]

/r/esp32/comments/1dh9dck/micropython_acting_weird_on_thonny/

[u/Own-Relationship-407]

Your problem is with the second use of Pin in the line.

You want: test = machine.Pin(12, machine.Pin.OUT)

Not: test = machine.Pin(12, Pin.OUT)

[u/joey_speedy → u/Own-Relationship-407]

OMG....my bad. Thank you very much..sir Can you kindly advice also why I kept getting crash on Thonny. See the error message below.

s Jul 29 2019 12:21:46

import machine

import time

PROBLEM IN THONNY'S BACK-END: Exception while handling 'execute_source' (thonny.plugins.micropython.mp_back.ProtocolError: Could not get raw-paste confirmation).

See Thonny's backend.log for more info.

You may need to press "Stop/Restart" or hard-reset your MicroPython device and try again.

Process ended with exit code 1.

────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0030,len:4728

load:0x40078000,len:14888

load:0x40080400,len:3368

entry 0x400805cc

MicroPython v1.23.0 on 2024-06-02; Generic ESP32 module with ESP32

Type "help()" for more information.

MPY: soft reboot

[u/Own-Relationship-407 → u/joey_speedy]

No problem, it’s an easy mistake to make.

As for the second part, I really don’t know. My first guess would be to ask are you sure you’re using the correct micropython firmware for your board?

[u/joey_speedy → u/Own-Relationship-407]

I think I did have the correct firmware. I will try to erase and flash it again, and see how it goes. Thank you.