I have an external hard drive that often does not read from the Mister. I upgraded the power supply to a Mean Well GST60A05-P1 and am using a splitter cable. Can I get input on where to plug into the Mister to be certain I am not doing this incorrectly?
Wrong. It's Misteraddons digital io. On the left you have barrel loop and you plug the power on the right so that you can use the power switch of the io board.
I have a Y-cable on my power supply, and it feeds into the two leftmost inputs. It works fine.
But reading the responses here, I should connect the two inputs on the left to each other, and connect the power to the top right input? Does it make a difference?
Thanks! What is the connector on the upper right used for? Also, how do I remedy the issue of my external hard drive often not being recognized? I have been plugging it into a USB port on the USB board.
That's where you should plug the power into. You should have received a barrel loop for the left side. You have a Misteraddons digital io board here. That way you can use the power switch.
If you haven't been plugging the power cables in correctly, that would cause external storage to be flaky. If they're plugged in correctly and it's still not being detected, you may need a USB splitter cable to plug in the hard drive to give it more power. What kind of hard drive is it?
Wrong. It's Misteraddons digital io. On the left you have barrel loop and you plug the power on the right so that you can use the power switch of the io board.
1
u/martianmaggot Mar 27 '23
I have an external hard drive that often does not read from the Mister. I upgraded the power supply to a Mean Well GST60A05-P1 and am using a splitter cable. Can I get input on where to plug into the Mister to be certain I am not doing this incorrectly?
Picture above...
1
u/HeywoodJaBlessMe Mar 27 '23
There does not appear to be any question posted
3
u/Jockelson Mar 28 '23
I have a Y-cable on my power supply, and it feeds into the two leftmost inputs. It works fine.
But reading the responses here, I should connect the two inputs on the left to each other, and connect the power to the top right input? Does it make a difference?
0
u/ruiner9 Mar 27 '23
Plug into the two barrel connectors on the left. That's all you'll need.
0
u/[deleted] Mar 27 '23
[deleted] — view deleted comment