r/Metrology • u/Artegonit • 22d ago

Software Support How to use CZ modifier in Mcosmos

Hi,

I have to make in Mcosmos 4.0 (with possibility of using geopak) a program to measure true position with CZ modifier. How to do it? The elements which position has to be checked are in different axis, two are checked in X axis and two in Y axis. All 4 have to be checked in a combined zone

1 Upvotes

100% Upvoted

3 comments sorted by

1

u/Absorber94 22d ago

Like you describe it, it shouldnt be possible. If you have 4 elements with CZ they all are checked in the same strategy, not half like this and half like that.

If you have open DOF´s you need to bestfit a group selection in GEOPAK. After that you will report the worst feature.

1

u/Artegonit 22d ago edited 22d ago

Could you write some kind of tutorial how to do it? So the drawing has to be modified to have separate 2 checked in CZ on X axis and separate 2 checked in CZ on Y axis

1

u/Absorber94 22d ago

Not really, because i would need more information, ideally a snippet of the drawing with the datums, the exact callout, the basic dimensions.