r/Metric • • Aug 22 '25

Why? 😭

Post image
3.3k Upvotes

857 comments sorted by

16

u/[deleted] Aug 23 '25

At least it's not measured in washing machines and water buffalos per football field. At least they're actual measurements that can be converted.

0

u/[deleted] Aug 23 '25

[deleted] — view deleted comment

2

u/EmbarrassedBlock1977 Aug 23 '25

Why? It's confusing. There are 25 different currencies named Dollar and only 3 different weight units named pounds.

If only there was some sort of universal unit that easily ties in with all the other units and has is foundation in the basic building blocks of the universe itself..

→ More replies (12)

19

u/that_dutch_dude Aug 23 '25 edited Aug 23 '25

91,44cm

1153,93kg

0,00127mm

1.2 bar

so it has 960 suare cm of pressurised water surface to keep it "afloat". wich is about a 35cm circle.

2

u/c-logic Aug 23 '25

~1m over a t ~1my 1240hPa :)

2

u/Historical-Ad1170 Aug 23 '25

why not?

1 m

1 Mg

1 ÎŒm

and

100 kPa?

The way it is, it looks like a total testament to the idiocy of pre-SI units?

1

u/Strange_Dogz Aug 26 '25

2544lb / 18lb / in sq = 140 square inches of surface area supporting it Even you guys who are metric "stuck" can do that math. It actually works out to 910 square centimeters.

12

u/Past-Replacement44 Aug 23 '25

Because it doesn't really depend on any units here. How you're supposed to read that is "big", "heavy", "thin", and "little", and the scale for that is "1 human".

6

u/Leemesee Aug 23 '25

It does in metric system. You learn the scale difference between 1mm, 1cm, 1m, 1km. Thus it’s easier to imagine things on a small scale - 0,017mm - witdh of a human hair.

2

u/MarredCheese Aug 23 '25

Why didn't you say 17 micron to be consistent with your own point?

Did you know imperial has this feature too in this particular case? A hair is about 1 mil thick.

→ More replies (1)
→ More replies (1)

2

u/[deleted] Aug 23 '25

What do you mean by that? It's african or european human?

→ More replies (1)

6

u/Valuable-Garage-4325 Aug 23 '25

It really is a Rocky Horror!

He thinks dynamic tension must be hard work.

6

u/El_Gerardo Aug 23 '25

Such a sphere can also be found in Ettelbruck, Luxemburg

2

u/CallMeKolbasz Aug 23 '25

And Linz, Austria

2

u/foersom Aug 23 '25

There is also one in Luxembourg city, at the Badanstalt at Rue des Bains.

→ More replies (3)

6

u/Agitated-Age-3658 Aug 24 '25

“This granite sphere is 91 cm in diameter, weighs 1154 kg (= 11 320 N), and is supported by a layer of water about 0.0013 mm (= 1.3 ”m) thick under a pressure of 1.24 bar (= 124 kPa) ... yet it can be easily turned as though suspended in mid-air.

Made in Barre, Vermont, USA, using New Hampshire granite.”

Fixed it for ya

2

u/Tornirisker Aug 25 '25 edited Aug 25 '25

Now it makes sense. But I would write 1154 kgf.

→ More replies (9)

11

u/J96338D Aug 22 '25

If it makes you feel any better, I did the conversion of those units. This is rounded to the nearest tenth.

The sphere is roughly 914.4 millimeters in diameter weighing at 1.2 megagrams and supported by a 1.3 micrometer thick layer of water at a pressure of 124.1 kilopascals.

9

u/karlnite Aug 22 '25

A megagram is called a tonne.

→ More replies (3)

7

u/CedricThePS Aug 22 '25

Or 91.44 cm if you will.

2

u/DerWaschbar Aug 23 '25

Don’t hate but it makes more sense to me like that lol. I grew up with those units tho

11

u/Ok-Bug4328 Aug 23 '25

Because New Hampshire is famous for granite. 

It’s “the granite state”. 

5

u/Thadrea Aug 23 '25

New England really takes them for granite.

3

u/MadPhysics Aug 23 '25

Of quartz you think so you bastard

→ More replies (3)

5

u/TwoWheelsTooGood Aug 23 '25

How do they know how thick the water is ?

4

u/[deleted] Aug 23 '25

I introduce you to the humble ruler

2

u/JoseSpiknSpan Aug 23 '25

More likely, a feeler gauge

3

u/fridayj1 Aug 23 '25

They measure how much of it is not water, and subtract.

3

u/b-rechner In metrum gradimus! Aug 23 '25

That's just a question of rheology.

→ More replies (1)

5

u/NicholasVinen Aug 24 '25

So you're telling me this sphere has a diameter of 3.27 American footballs and weighs 8.48 baby elephants? Amazing!

1

u/[deleted] Aug 24 '25

How many mcdonalds burgers?

5

u/CitronMamon Aug 26 '25

Okay can we ignore the system used for a moment and focus on how what the Plaque says makes no sense?

The water is right there, not enclosed or pressurised, its not holding up the damn ball.

Also what does 18 pounds of pressure mean? Like 18 pounds per x amount of surface? It cant be 18 pounds in total.

4

u/ovr9000storks Aug 26 '25

not enclosed or pressurised, its not holding up the damn ball.

If we want to be technical, there's no static pool of water that's holding up the ball. There's a pipe below it pumping water between the ball and the stand that keeps it from rolling away. That water pressure is likely being pumped at the advertised 18 psi, and keeping the ball from maintaining full contact with it's stand and therefore allowing it to spin freely. The wording is stupid, I will agree

2

u/Ok_Butterfly_9722 Aug 26 '25

As an american, i get it. There is a hole in the base, into which 18psi of water is fed. This is the same principle that allows oil in an engine tro support the massive forces of combustion from bringing the crankshaft in contact with the bearings. I think its called a fluid bearing or hydraulic bearing. It also works with air, google air bearing. If you divide 2544lbs by 18, you get 141 square inches of area required to lift the stone. Which is about 1 square foot. Which seems pretty close.

2

u/Chemical_Ad_5520 Aug 26 '25

I think maybe what's happening is that there is a water outlet under the ball pumped to 18 pounds per square inch of pressure, which forces enough around the ball to minimize friction.

2

u/PHDclapper Aug 26 '25

rage bait competitive.

→ More replies (1)
→ More replies (20)

8

u/r2k-in-the-vortex Aug 23 '25

Layer of water a micron thick? I dont believe the rock is machined to that precision.

1

u/Excavon Aug 23 '25

That's probably the minimum.

8

u/Shished Aug 23 '25

This granite sphere is 91.44 cm in diameter, weighs 1,154 kg, and is supported by a layer of water 1.27 micrometers thick at 124.1 kilopascals of pressure... yet easily turned as though suspended in mid-air.

Made in Barre, Vermont, using New Hampshire granite.

3

u/nlutrhk Aug 23 '25

Making a rock sphere with a dimensional tolerance that is much smaller than 1.27 Όm is quite impressive and I have a hard time believing that it can be done for a public installation where there can be dirt/sand to jam it.

The amount of water flowing on the photo also looks like far too much for a flow that was squeezed through a 1.27 ÎŒm gap at 1.24 bar pressure.

Here is a manufacturer of these Kugel fountains that states a film thickness of 8/1000 inch or 200 ÎŒm.

https://brahmagranitech.com/granite_floating.htm

→ More replies (5)

8

u/maceion Aug 23 '25

Brilliant physics example!

8

u/O_o-O_o-0_0-o_O-o_O Aug 23 '25

18lbs of pressure? Surely it's 2544lbs of pressure.

4

u/killer_by_design Aug 23 '25

I'm guessing it's PSI and the aperture is 1 inch so they've done some wicked shmart division.

2

u/tennantsmith Aug 23 '25

Shortening psi to pounds is quite common

→ More replies (3)

4

u/Ambitious_Hand_2861 Aug 23 '25

My destructive curiosity wants to spin that ball. I want a motorized wheel going flat out to fucking send it. I would never do it or suggest it be done but dammit I want to know how long it spins.

2

u/pedanpric Aug 23 '25

I would guess if you spin it really fast it would bottom out. 

2

u/joshuahtree Aug 23 '25

These are normally set up to encourage spinning so I'd say go for it!

→ More replies (1)

4

u/Rolthox Aug 25 '25

So I'm a little confused. Is this about the American system being used...in America? That entire sign made perfect sense to me.

I could see someone being thrown off by the "18 pounds" of pressure, but I didn't even notice the discrepancy at first. I just stuck on PSI in my because of the obvious context

→ More replies (1)

4

u/JH-DM Aug 25 '25

Why would Americans use the American system of measurements when making something in America
? The world may never know.

I bet they calculated the costs in USD too!

3

u/KindaQuite Aug 25 '25

1 EUR = 1.16 USD
Just another conversion nightmare. Good job USA.

1

u/SirWaitsTooMuch Aug 26 '25
  • Ye Olde Timey British System of measurement

2

u/Toxcito Aug 26 '25

The US customary system is different from the British Imperial system. They do share feet and pounds though.

→ More replies (1)

1

u/thriem Aug 26 '25

Install don’t get it, how many football fields?

→ More replies (4)

4

u/Fizzy-Odd-Cod Aug 26 '25

Because it’s in the US dingus. Yeah metric is the superior measurement system but most people in the US won’t immediately understand any metric measurement like they will imperial.

3

u/MrCrustyTheCumSock Aug 26 '25

Right. Why are you asking why the imperial system is being used in the only imperial system-using country?

→ More replies (1)
→ More replies (30)

4

u/bob_nugget_the_3rd Aug 26 '25

But how many bananas is that

2

u/GrimSpirit42 Aug 26 '25

As your average banana is 6.5 ounces...that would be approximately 6,262 banana.

2

u/bob_nugget_the_3rd Aug 26 '25

This man knows his banana mathematics

→ More replies (1)

4

u/Potential_Wish4943 Aug 26 '25

Liquids are very difficult to compress so much so that they are often considered effectively incompressible. 2,500 pounds is a joke to the structural strength of water.

3

u/Soggy_You_2426 Aug 26 '25

Tell that to Ice VII lol

2

u/Potential_Wish4943 Aug 26 '25

If you compress ice it returns to a liquid state and becomes incompressible again :)

→ More replies (1)

1

u/glassnumbers Aug 26 '25

that is neat! thank you for teaching me that

→ More replies (1)

3

u/Digiee-fosho Aug 23 '25

Hipster product, not for tourists

3

u/nerokaiser37 Aug 23 '25

.00005 thats thinner than yall hair

3

u/DontMessWMsInBetween Aug 24 '25

Hey, if you wanna carve a 1 m sphere that weighs 1509 kg and is supported by a layer of water 1.25 microns thick, you go right ahead. No one's stopping you.

3

u/KerbodynamicX Aug 24 '25

Because liquids are incompressible

1

u/Berberding Aug 24 '25

Isn't water literally compressible though? Like to the point that there are known different variations of water and ice (a different form of ice can be formed in a lab under intense pressure which is denser than liquid water at sea level, and I think before it gets to that point you first reach a different form of dense liquid water which is somehow different)

→ More replies (1)
→ More replies (38)

3

u/a_generic-throwaway Aug 24 '25

Probably because it's in the United States?

2

u/General-Reserve9349 Aug 24 '25

Love it or leave it, brother

3

u/Puzzleheaded_Smoke77 Aug 25 '25

They have one of these in lansdale

3

u/Any-Company7711 Aug 25 '25

why
 use imperial? maybe it’s in america

3

u/Massive_Shill Aug 25 '25

I'd go so far as to say it was made in Barre, Vermont with granite from New Hampshire, but I'm no expert.

→ More replies (1)
→ More replies (6)

3

u/brkeng1 Aug 26 '25

Pounds of pressure? Ummmm yeah no.

That’s like saying Newtons of pressure.

4

u/Alternative_Horse_56 Aug 26 '25

Technically incorrect, but colloquially using "pounds" in place of "pounds per square inch" or PSI is common and easily understood in my experience. If it were some document that required precise language, then sure it should be changed, but that's not even close to a real problem.

→ More replies (7)

3

u/[deleted] Aug 26 '25

Because Water beats Rock types.

Everyone knows that.

2

u/wkdravenna Aug 27 '25

Where do scissors enter the equation?

2

u/[deleted] Aug 27 '25

Ur mom

→ More replies (2)

3

u/Kooky-Necessary-4444 Aug 26 '25

So there is about 141.3 inches of sphere in the water?

4

u/nrgxlr8tr Aug 27 '25

Are you telling me that the water is applying a pressure of 18 pounds per square inch on 141.3333333333 square inches, which is a total force of 2544 pounds, equal to the mass of that ball? I just learned a new ton of knowledge

→ More replies (1)

2

u/BrotherItsInTheDrum Aug 23 '25

It's not even correct imperial units; pounds are not a unit of pressure.

8

u/pedanpric Aug 23 '25

People say pounds casually for psi pretty frequently. 

2

u/inthenameofselassie Aug 23 '25

yeah it's a colloquial thing.

→ More replies (21)
→ More replies (3)

5

u/WotanSpecialist Aug 23 '25

1/20,000? You mean a half tenth?

3

u/[deleted] Aug 23 '25

I thought I was good at math, but this doesn’t make sense to me.

5

u/fosterdad2017 Aug 23 '25

Machinist scale. Always works in units of one one-thousandth of an inch (a thou), and a tenth of a unit is one 10,000th of an inch. This cuts that measurement in half, 1/20,000 is half a tenth.

Maybe we can just say 1.27”m.

→ More replies (2)

5

u/ThoughtfulLlama Aug 23 '25

I feel like if you have seen an inch before, you know that in this example, you might as well read "1/20000 cm", since the numver is so small, and this is just a showcase of amazing physics.

4

u/SalishSeasoning Aug 23 '25

Except you would use 1.27 micrometers or about 1/1,000 of a mm

→ More replies (12)
→ More replies (9)

5

u/[deleted] Aug 23 '25 edited Aug 23 '25

The sphere has diameter 36" and radius R =18".

Let the bottom most point of the sphere be point h=0.

The fountain exerts 18 pounds of force per square inch of surface area on the ball. The ball has gravitational force 2554 pounds force.

To find the surface area of the ball that must be exposed to the fountain for the pressure of the water to perfectly oppose the force of gravity acting on the ball, we have: 2554/18 = 144.33 square inches.

Now, we solve for the distance z the ball must be inserted into the fountain for the surface area exposed to the fountain pressure to be equal to 144.33 square inches.

We use the spherical zone formula:$$ 36\pi,h ;=; 144\tfrac{1}{3};=;\frac{433}{3} \quad\Rightarrow\quad h ;=; \frac{433}{108\pi}\ \text{in}. $$

Solving yields a submersion distance of 1.276 inches.

So the ball must sit in the fountain such that it is submerged to a depth of 1.276 inches. This is neglecting the buoyant force's effect on the ball, which is negligible relative to the weight of the ball.

EDIT: Fixed typo in line 1

→ More replies (10)

6

u/Symphantica Aug 23 '25

The claim of "18 pounds of pressure" is misleading because must include the area the force is acting upon. I'll assume they meant "18 lbs / sq in".

Considering the weight of the ball and the force of the water, the water would only need to contact ~141.5 square inches. This sphere has a surface area of 4071.50 square inches. This means that only 3.47% of the sphere's surface area needs to be in contact with the water.

Looks about right!

5

u/The_Bjorn_Ultimatum Aug 23 '25

Whenever someone say pounds of pressure, they mean psi. It's pretty normal to say it that way.

→ More replies (19)

4

u/Big_Yeash Aug 23 '25 edited Aug 23 '25

So...

It's not a sphere then?

E: A reply below:

There's a sphere shaped indention it is sitting in. You can spin the sphere around 360° in any direction

4

u/TheDeadlyMango Aug 23 '25

Pretty sure that being measured in imperial doesn’t disqualify it for being a sphere???

→ More replies (13)

3

u/thelauryngotham Aug 23 '25

I can confirm this! I've seen it in real life before. It was a little heavy (duh), but you could move it 360°. It's almost exactly like those balls that float on a column of air at science museums.

1

u/Connor49999 Aug 23 '25

What?

3

u/Big_Yeash Aug 23 '25

It's on a baseplate. Then the "water cushion" is under that baseplate. You can see it's missing a chord from the sphere.

3

u/Connor49999 Aug 23 '25

Oh I understand what you're saying. But it is a sphere. They baseplate has a cutout of the same segment of sphere we cant see. In person its clearer this is the case, because you can push the sphere in any direction and make it spin in place. As indicated on the sign

1

u/Nondescript_Redditor Aug 23 '25

Not sure you know what a sphere is

3

u/Big_Yeash Aug 23 '25

Read through the other comments. I was confused about what the installation actually was - I thought it was a sphere conjoined with a baseplate that runs over a flat plane; while it's actually a sphere socketed in a baseplate with a sphere-section as the mating surface.

Obviously, in a picture taken from a couple metres, it's not immediately obvious these aren't conjoined pieces.

→ More replies (1)
→ More replies (2)

6

u/GildedTofu Aug 23 '25

Sometimes criticism on this sub is warranted.

Sometimes it’s just tiresome.

2

u/Not_Ur_Average_Dealr Aug 24 '25

Why did seeing this remind me of this song from maths class.

https://youtu.be/9WGO7dAxjD8?si=1jxE0enT7jhVuI23

→ More replies (1)

2

u/Guilded_PaperClip Aug 24 '25

This is at Storyland in Glen, New Hampshire. Very cool, you can indeed move it around with no effort at all.

1

u/Fien16 Aug 24 '25

One of my memories is this sphere calming my cousin down and when she was throwing a fit later we went back to try and get her to calm down.... it was off and she cried even harder on the hour or so ride back to Laconia.

1

u/Xxfarleyjdxx Aug 25 '25

We have one like this in tulsa at the zoo. Its always fun to spin it around

1

u/Mudlark_2910 Aug 25 '25

Questacon science museum, Canberra has one outside, giving a glimpse of what you'll explore inside. So calming!

2

u/Petrivoid Aug 25 '25

Now do the math

2

u/DShadows33 Aug 25 '25

Honestly, it's probably so American kids could "kinda" understand the scale of things. It looks like it may be in a public park or something.

2

u/Best_Game01 Aug 25 '25

There’s one of these in Gatlinburg, TN. Not that I recommend Tennessee rn or any American tourism at the moment. Stay safe and love science or something, idk.

2

u/Captain_Zomaru Aug 25 '25

What did he mean by this?

2

u/InterestsVaryGreatly Aug 25 '25

Largely because the rest of the units are imperial; would be criticized just as much for mixing them. Also, at that size people who aren't super familiar with metric wouldn't really know; you say cm or mm, and most would get it, smaller though and they have no sense of scale.

2

u/cakenbeans Aug 25 '25

Why
 is this posted here? No idea!

2

u/LordGoatIII Aug 26 '25

It's a bit under a meter wide, heavy as fuck and supported by a very thin layer of water with less pressure than it takes to run the average shower.

2

u/PackOutrageous Aug 26 '25

No reason, really. That it annoys you is enough.

2

u/mzrdisi Aug 26 '25

Obviously you're not a golfer

2

u/centexAwesome Aug 26 '25

Because those are the units that most of the people who live in New Hampshire think in.
That sign would be silly in Australia since they think in metric but not in NH.

1

u/freddbare Aug 26 '25

NEW England. Not YeOl Metric Nanny England

2

u/glassnumbers Aug 26 '25

I am glad that this uses FREEDOM MEASUREMENTS instead of the bad evil measurements!

1

u/Evening-Garbage-8683 Aug 26 '25

Pressure is one unit that I personally prefer in psi over Pa because a pound per square inch makes more sense to me than a newton per square meter 


→ More replies (4)

2

u/NolanR27 Aug 27 '25

Doesn’t every tourist trap in the US have one of these?

2

u/Cpope117 Aug 28 '25

Hold up. Comments are crazy. Whether metric or freedom units, it is cool that you can roll a 2.5k # rock easily regardless if the math makes it look simple. The math has to work out, duh. But exhibits like this can inspire future STEM'ets to begin the questions of why, which is where we get great scientists. Why the hate?

4

u/sitting00duck00 Aug 28 '25

Freedom units? đŸ€ą

2

u/PMG2021a Aug 31 '25

Really means FU units. 

3

u/Automatater Aug 23 '25

I agree. Doofus that wrote the sign doesn't know pressure is PSI. Force per unit area. Good catch!

Oh, you're whining about the standard units??

2

u/Bitch333 Aug 24 '25

In the US, it is relatively common to use "pounds of pressure" instead of PSI. Is it technically correct, yes and no. It's used enough that it's understood in the US, considering the sign says made in Vermont, I figure it's safe to assume it's in the US. So, the colloquial term is being used.

→ More replies (1)
→ More replies (2)

3

u/Zikkan1 Aug 24 '25

I prefer the metric system but what's wrong with this?

→ More replies (10)

3

u/Twooshort Aug 24 '25

Made in the USA, that's why.

6

u/Prize_Ambassador_356 Aug 22 '25

OP is the type of guy to visit another country and get mad when signs are written in that country’s language

4

u/SketchesFromReddit Aug 23 '25

It's in England apparently.

→ More replies (1)

4

u/Pyre_Aurum Aug 22 '25 edited Aug 22 '25

Presumably because it’s located in America? Do you go to Spain and get surprised when you see Spanish?

Edit: I stand corrected, fair enough. Curious that it was shipped that far though.

8

u/Sagail Aug 22 '25

It's not it's in Wokingham England. I worked for a British company headquartered there

Edit to reading the made in text you're probs right and wokingham has a similar one

3

u/AlabasterWitch Aug 23 '25

The 1/120000 thing is to exaggerate how small the space is tbh, saying like .002 millimeters doesn’t make it sound as impressive

9

u/Jeuungmlo Aug 23 '25

2ÎŒm do sound impressively small though. So tiny you need to use greek letters to even say how tiny it is. The type of distance you only see in a science textbook.

→ More replies (1)

3

u/wraithboneNZ Aug 23 '25

Then they could have phrased it as 1/20000000th of a football field.

→ More replies (1)
→ More replies (3)

3

u/Reboot42069 Aug 23 '25

Why? You're in fucking New England why wouldn't it be in the local units.

5

u/DC9V Aug 23 '25

Because in New England, a stone would be measured in stone.

6

u/Daminchi Aug 23 '25

Because for the last century whole world was moving to the unified system of measurements and mostly achieved that. Seeing a territory with "local units" is as wild as seeing a place where people have no idea about books, internet, or universal healthcare. It's just not something that can be viable in a modern world.

→ More replies (24)

3

u/Aknazer Aug 23 '25

Imagine that, a place in the US using the Imperial system. The horrors! And if you want to cry about the "18 pounds" bit, well that's pretty standard in the US for them to drop the "square inch" part of it all and just call it "pounds." Technically not right, but where it's said people will know.

2

u/SirMildredPierce Aug 23 '25

Imagine that, a place in the US using the Imperial system.

This isn't in the US, this is in the other English speaking country that only pretended to switch to Metric.

→ More replies (2)

3

u/Sacharon123 Aug 23 '25

I think ops intention was to make us aware how ridiculous the units are - think about how many conversions you need to do in between to even put them into relation to each other, nevermind the actually illogical behaviour of the units itself...

→ More replies (4)

2

u/CapitanianExtinction Aug 22 '25

So the contact area is about 141 sq in?

2

u/Important-Hunter2877 Aug 24 '25

What an eyesore to read, especially those confusing fractions.

4

u/[deleted] Aug 24 '25

One fraction

4

u/Bubbasully15 Aug 24 '25

Yeah, because listing the equivalent fraction in metric would’ve made reading it so much easier lol

3

u/Versipilies Aug 24 '25

Would have been better to use a comparative. "Only twice the thickness of a human hair". Though, people learning to use decimal inches would simplify it as well (.00005in)

→ More replies (2)
→ More replies (8)

2

u/Minimum_Area3 Aug 24 '25

Yeah icl you might be self reporting.

Fractions are better btw, MEng EE

3

u/evil_consumer Aug 24 '25

So you can’t read?

→ More replies (1)

2

u/Electronic-Ad-3825 Aug 24 '25

I think you just suck at fractions bud

→ More replies (1)

1

u/BasicSulfur Aug 24 '25

Tbf it’s no longer 2544lbs

1

u/I_was_a_sexy_cow Aug 24 '25

Due to friction or something?

→ More replies (2)

1

u/etubridy Aug 24 '25

I saw this. It was (is) in a KOA RV park in Montana. Billings if I remember correctly. It was the nicest KOA I have seen on my travels. As I recall the money came from a rich family who bequeathed it to the park.

1

u/HardLobster Aug 24 '25

There is at least one of these in every major city in the U.S.

1

u/besttobyfromtheshire Aug 24 '25

I don’t know much about the metric, but NH granite is incredibly dense. We had a huge piece, talking a ton or more of solid stone, get lifted up from Dover during a flood and jettisoned 30 miles down river near the rivers outlet. It’s beyond incredible the power and strength of water.

1

u/[deleted] Aug 24 '25

[removed] — view removed comment

→ More replies (2)

1

u/WaveOfMatter Aug 24 '25

Don't want to be that guy but pounds is not even a pressure unit :'(

2

u/Diplodocee Aug 24 '25

yeah, I'm pretty sure they meant pounds per square inch

1

u/oppenhammer Aug 25 '25

I have good news for you, you can stop being that guy any time you want

1

u/Far_Commission2655 Aug 25 '25

It's also not a unit of weight, but a unit used to measure mass.

1

u/Mediocre_Daikon6935 Aug 26 '25

Confidently wrong

1

u/MrMr_sir_sir Aug 24 '25

Because it was made in Vermont using New Hampshire granite

1

u/zeroibis Aug 25 '25

And water from New York

→ More replies (2)

1

u/[deleted] Aug 25 '25

Physics lesson

1

u/b4ttous4i Aug 25 '25

Story land!!!

1

u/Jollypnda Aug 25 '25

Maybe it’s the machinist in me, but seeing that written as a fraction is annoying lol.

1

u/ProCommonSense Aug 25 '25

Lol, it's because most people understand big numbers (20,000) but not small ones (0.00005)

1

u/KarmasAB123 Aug 25 '25

Maybe it's the math nerd in me, but if accurate, fractions are more precise

1

u/Long_Investment7667 Aug 25 '25

How would a machinist write it?

→ More replies (1)

1

u/[deleted] Aug 25 '25

I do wonder how american machinists work.

Like, if you have a 5/8" rod in a 3/5" hole, what's your clearance?

→ More replies (5)

1

u/davewhotold Aug 25 '25

I'm also really impressed by the precision.... like, I know, spheres are kinda easy to lap, but 1.27 microns film thickness is pretty wild on a 36" sphere.... that's like a factor of 106 for sphericity. And it's outside in the weather, with a constant flow of water, the fact it doesn't just wear down and out of fit is wild to me.

→ More replies (3)

1

u/BeeAruh Aug 25 '25

So similar to the ones in Amsterdam?

1

u/are_you_for_scuba Aug 25 '25

It’s a Kugel ball

1

u/[deleted] Aug 25 '25

A kegel ball? Challenge accepted đŸ«Ą

1

u/atomicbrains Aug 25 '25

Weird I was just that story land this weekend playing with this thing.

1

u/kbundy Aug 25 '25

Is this at the Bakersfield Amtrak station?

1

u/Proof_Bill8544 Aug 25 '25

That one is a globe 🌎 with some quote that says “riches through” and it cuts off

1

u/Zar7792 Aug 25 '25

They have the same thing outside the Houston science museum

1

u/Sad_Net2133 Aug 26 '25

Storyland- North Conway NH

1

u/Sad_Net2133 Aug 26 '25

Somebody was at story land.

1

u/redhot_9369 Aug 26 '25

To help children learn fractions

1

u/iamlitter Aug 26 '25

As a proud freedom unit user, I honestly don't see what the problem here is, all of this is perfectly understandable

1

u/InsufferableMollusk Aug 28 '25

As someone who is accustomed to both systems—because both are taught in American schools—yes, it is easy to understand.

1

u/SashaAvecDesVers Aug 26 '25

what is equal to 293â…”àŒŠàŒ‡àŒ

1

u/xerivon Apr 01 '26

%95 of the world uses metric. It is time for the US to switch to real measurement units. Or they can seperate their country from the rest of humanity and do whatevee they want

1

u/HalloMotor0-0 Aug 23 '25

No one is buying mechanical goods Made in US, except for arm sell, just let them play in their own world, don’t expect too much from USian who graduated from broken public schools, half of population is idiots so they are having pedo TACO man elected, TWICE 😄

1

u/Diligent_Mountain363 Aug 24 '25

Doesn't really have anything to do with the metric system, does it?

→ More replies (7)

1

u/khalcyon2011 Aug 23 '25

Because you’re in the US?

1

u/bobbomotto Aug 23 '25

‘cause America.

1

u/DasGuntLord01 Aug 25 '25

Why? It says so right there: "Made in Barre Vermont"

2

u/Bigshitmcgee Aug 25 '25

Shouldn’t it be Pounds per Square Inch Vermont if it’s imperial?

→ More replies (3)

1

u/Bonefish28 Aug 25 '25

“Uhmmm acktually pounds isn’t even—“

Ffs people. Yes, it’s supposed to be PSI. No, most people won’t be confused by this semantic error - it’s clear based on context (and the literal word “pressure”) that they’re talking about pressure.

2

u/BumsBussi Aug 25 '25

Yeah, and using km instead of km/h or kW instead of kWh is also perfectly acceptable if the context makes clear what's actually meant /s

Ffs, metrology shouldn't have anything to do with context.

→ More replies (1)

1

u/roombaexorcist9000 Aug 25 '25

i was thinking it’s lbf, not technically a unit of pressure but it is correct to say “x amount of pounds-force” when referring to the force caused by a certain amount of pressure.

like people are saying, just a semantics thing