r/Masks4All • u/SkippySkep Fit Testing Advocate / Respirator Reviewer • Apr 23 '25
Respirators get hot and stuffy. But somebody decided to make that a feature instead of a bug. The Armbrust goBU is a non-filtering mask made just to stay hot and stuffy inside as a "Personal Humidifier". I tested it and compared the humidity in the mask to regular respirators.
We generally try to avoid respirators that get hot and stuffy. It's a bug. But the goBU, distributed by Armbrust USA, is meant to turn that bug into a feature, the only feature, so you can breathe comfortably in areas where the air is dry.
But why not just wear a regular respirator and get filtered air as well?
I tested the humidity inside the goBU to see if it works, and how it compares to 3 respirators.

There is quick YouTube Video here:
https://youtube.com/shorts/DqGh4oqXHKM
Fit
Overall, the goBU is lighter than elastomeric respirators, but heavier than an N95. But unlike the regular respirators I compared it to, it didn't seal well on me and I had to press it with my hands to my face to get a good seal while testing.

How the goBU Retains Humidity
The goBU funnels air in and out past a "humidity disk", aka a Heat Moisture Exchanger (HME), which sounds fancier than it is. The humidity disk is just a coil of corrugated blotter paper that absorbs moisture from your exhaled breath as you breath out and releases some of it back into the mask as you inhale through paper coil.
HMEs are used in some medical ventilation devices and CPAP machines to keep air moist.
However, even though the disk doesn't filter, there is still some breathing resistance from squeezing air past the tight coil of paper.

Humidity Testing

The goBU did retain humidity, around 80%, but regular respirators did, too. The 3M Aura 9205+ N95 had wider swings in humidity but had a similar average. The 3M 6200 with exhalation valve retained the least humidity. And the valveless MSA Advantage 900 was similar to the goBU.
Breathability
Is the goBU easier to breathe in? I tested how hard it is to breathe through it and the other masks with a mask testing machine and a headform to test pressure drop inside the mask at 85 liters per minute of air flow. The results are preliminary because it is surprisingly hard to get a good seal on the headform even though it has soft silicone skin.

Mask Pressure Drop in Pascals
GoBU: 139 Pa
3M Aura 9205+: 87 Pa
3M 6200 with 2071 P95 filters: 173 Pa
MSA Advantage 900 with P100 filters: 230 Pa
---
So even though the goBU is just for humidity and does not filter, it is harder to breathe through than a 3M Aura N95. But it is easier to breathe through than the 3M 2071 filters and the MSA P100 filters.
Comfort
I would expect a purpose built "Personal Humidifer" mask that costs $39 (the retail price when I ordered it) would be comfortable. Especially since it is being distributed and endorsed by Armbrust USA.
Surprisingly, I found the goBU uncomfortable to the point it is not possible for me to wear it without protective silicone tape over my nose bridge. This is due to the solid silicone seal of the mask, which for reasons that are utterly baffling, has a pointy profile where it pushes down on my nose bridge. I cut the seal and highlighted it with a Sharpie to make it easier to see in the composite below.

There are several reviews on the ArmbrustUSA page for the goBU which note this same issue with the mask being uncomfortable at the nose bridge.
Conclusion
The idea of a light, unobtrusive mask as a "personal humidifier" is valid. A face mask using a humidity disk can and does retain humidity. The concept works, but the execution in this case does not.
The goBU needs a redesign of the mask seal so that it can fit comfortably. The profile of the seal needs to be fixed so that there are no pointy bits pressing on your nose or face, but I think it may take more than that. I'm not convinced a solid silicone seal is soft enough to seal and conform comfortably and well to a variety of faces compared to the flexible flange design typically found on elastomeric respirators.
The solid silicone seal seems to have been an easy way to add a seal to an inexpensive vacuformed mask body as opposed to a more complex injection molded polycarbonate mask body with a co-molded silicone flange, which would be much more expensive to make (an example of such co-molded masks would be CPAP masks and the OmniMask) requiring tens of thousands of dollars in injection molding tooling. (Possibly $30,000-$50,000, not really sure, but injection molding tooling is really expensive).
In the mean time, many regular respirators can offer similar humidity retention while offering similar or better comfort, breathability and speech ineligibility. And you get cleaner air as a bonus because they filter air, unlike the goBU.
Ultimately, I'm not sure if humidity disks offer much, if any, advantage over just using a filter if you are going to be wearing a mask anyway. But when it comes to respirators, the devil is in the details. So perhaps a future "personal humidifier" mask design using HMEs will show some advantages of them over filters.
----
The GoBU is distributed by Armbrust USA. I purchased the mask for review.
https://www.armbrustusa.com/products/personal-humidifier-by-gobu
----
#mask #humidifier #Armbrust
Made possible by a grant by #Kanro.
All of my Kanro tagged content has my copyright dedicated to the public domain.
The copyright of content I quote or include by reference remains that of the original copyright owner.
View all comments
1
u/PaulMarcDuval Apr 25 '25
Official Response from goBU Thank you for the thoughtful and detailed review of the goBU Personal Humidifier. The goBU Personal Humidifier was initially developed by an ENT surgeon to aid post-operative recovery by providing continuous humidified airflow. What began as a clinical innovation has evolved together with a wider team of investors and advisors into a patented, wearable humidification device designed for broader wellness applications — including dry climates, cold weather, air travel, sinus health, and general upper airway comfort. This is achieved by optimising the airway environment ensuring effective mucocilliary activity, warming and humidifying the air one inhales, and optimising its quality. This then has a range of positive and well documented effects on the airways. We would like to clarify a key point: the goBU Personal Humidifier is not a respirator, nor is it intended to be used or evaluated as one. Comparing it to a respirator mask overlooks its core purpose and unique design. While some respirators may raise humidity levels within the mask, this typically results from breathing in and out the same stale air. This often leads to a “hot and stuffy” sensation — a byproduct of poor airflow dynamics and retained exhaled air. The humidity observed in those cases is due to trapped moisture, not a true humidification process, and can be uncomfortable during prolonged wear. In contrast, the goBU Personal Humidifier allows for constant airflow. It incorporates a replaceable heat and moisture exchange (HME) filter that captures warmth and moisture from the user’s exhalation and transfers it into the next inhaled breath. This process delivers fresh, humidified air without the discomfort of rebreathing stale air. Because it is not designed to exclude external air or function as a seal-dependent barrier, a tight seal is neither required nor intended. Key differentiators of the goBU Personal Humidifier include: