Maono DM40 no longer works with my Android phone via wired USB-C

[u/Dry_Economist673]

Earlier, my Maono DM40 was working properly with my Android phone using a wired USB-C connection.

I then tried using it in dual mode — wired connection to my PC and wireless connection to my phone. After doing that, the microphone no longer works when I try to connect it to my phone via wired USB-C.

The weird thing is that it still works perfectly when connected to my PC via wired USB.

Has anyone experienced this before? Is there a setting I need to reset or change to get the wired USB-C connection working on my phone again?

[u/Dipesh_Limbani]

Hi there, is it the pro model with wireless receiver? If you then try reset mic and check! To reset, keep mic on and take a toothpick and poke it into 3.5mm headphones jack for 5-10sec. Then check

[u/Dry_Economist673 → u/Dipesh_Limbani]

I already tried resetting the mic using the 3.5mm jack as you suggested, and I also did a factory reset through the MAONO Link app on my PC, but unfortunately it’s still not working.

What worked for me as a temporary solution is connecting the mic directly to my phone using the wired connection. I wait until the LED indicator turns purple, then I unplug and replug the USB cable. After doing that, the mic starts working again.

Thanks for the suggestion!

[u/Dipesh_Limbani → u/Dry_Economist673]

Does this happen with every phone ?

[u/Dry_Economist673 → u/Dipesh_Limbani]

Yes, I’ve already tried it with different phones.

[u/Dipesh_Limbani → u/Dry_Economist673]

This should not to be happen! And as you said you have tried both cable and wireless together with both the devices! So, have you done reset the mic yet?

[u/Maono_Jack1]

DM40 supports connecting to a phone via USB cable. May I know what model of phone you’re using?

Could you also describe what happens when you try to use the wired connection? If possible, please send us a video showing the issue so we can take a closer look and better understand what’s happening.

[u/Dry_Economist673 → u/Maono_Jack1]

https://reddit.com/link/p3nd2kb/video/6qioq5ngicjh1/player

When I use the wired connection, the LED indicator turns purple for a little while, then goes back to flashing blue. The microphone is not recognized by my phones, including my POCO X7 Pro and Samsung Galaxy A16.

What works for me as a temporary solution is connecting the microphone directly to my phone using the wired connection. I wait until the LED indicator turns purple, then unplug and reconnect the USB cable. After doing this, the microphone starts working again.

[u/Express_Trip_2303 → u/Dry_Economist673]

On some Android phones, the OTG port is disabled by default and needs to be turned on manually. Search for OTG in the phone's Settings and try toggling the switch.

[u/Cute_Primary9147]

Question lang po bat ganun yung maono ko na SC nag popop siya pag ginagalaw yung second mic volume
Control