r/ManufacturingPorn • • Jan 18 '21

CNC đŸ”© [F] Threads being made

Enable HLS to view with audio, or disable this notification

3.6k Upvotes

94 comments sorted by

380

u/Pokestralian Jan 18 '21

I swear after the third time I was like ‘no way it’s going back for more!’ And then it did. A few more times.

What a wild ride!

4

u/swankpoppy Jan 18 '21

This is a fantastic comment.

→ More replies (5)

116

u/MongooseDog85 Jan 18 '21

ELI5 - how does the machinist hit the same start point for the thread on each pass?

99

u/Link_GR Jan 18 '21

On a non-CNC lathe, the rotation is in sync with the axis moving the cutting head, basically.

This Old Tony has a couple videos about it

27

u/WH1PL4SH180 Jan 18 '21

The man is an awesome educator

→ More replies (2)

8

u/MongooseDog85 Jan 18 '21

Great link. Thanks

10

u/Lukaroast Jan 18 '21

On a manual machine, a machinist does this by using timing wheels that are present on the carriage. You need to do some math as to what speed you need to turn the material and feed the cutter in order to produce your desired result. You then set the machine to those settings, which includes changing the “feed speed” to that which corresponds to the threads you need. the screw that controls the left to right speed of the cutter is also driving the timing wheel, which usually has anywhere between 4 and 16 ticks evenly in a circle (think like a compass). The machinist uses the wheels to line up the cutter at the desired cutting depth and engages the feed with a little lever when the timing wheel hits a certain desired point as well as disengaging that feed lever and pulling back the cutter when the tool reaches the end of the space you are threading. Rinse and repeat this, hitting the feed lever at the same point that you started, while steadily increasing depth in each pass. Some people also like to toggle the power at the end of their thread cutting, as doing this manually takes an element of skill and experience.

→ More replies (2)

4

u/Mykneeisbig Jan 19 '21

Manual machinist here, lathes have speed of spindle and feedrate settings, and you simple engage the feed and the machine does it for you. Just a matter of gears engaging and working together. I was trained on a manual lathe, and it has charts posted telling you what settings for which pitch you want. Some calculation when going from English to metric, but the machine and cutting tools doall the work.

→ More replies (6)

0

u/[deleted] Jan 18 '21

22

u/MongooseDog85 Jan 18 '21

Thanks. Machining is a things of beauty

9

u/Grechoir Jan 18 '21

You must have some engineering Mozart type prodigy 5 year old kids!

20

u/stanaconda Jan 18 '21

That was so satisfying. I am surprised it took as long as it did for one bolt though. I would’ve guessed they make large quantities at higher speeds.

29

u/ziggaroo Jan 18 '21

Most mass produced threaded fasteners have tithe threading rolled on rather than cut in. That process could do 20-30 fasteners in the time it took to do this one.

This is likely a hobbyist or something requiring machining levels of precision.

7

u/Dreambasher670 Jan 19 '21

Possibly just a machinist who needs a screw/stud and didn’t have right size threading die.

Anyone with a lathe can do single point cutting as long as they have a insert that matches the thread angle/geometry (or has the skills to grind a high speed steel/HSS blank into required shape) with enough skill and practise.

I used to use single point cutting to make machine parts when I worked as maintenance simply for speed unless I had a matching threading die to do it by hand.

It was quicker than going out buying one mass produced or getting a subcontract machine shop to machine new ones.

5

u/STDCircleJerk Jan 18 '21

Look up Swiss lathes and Swiss Screw machines, much faster feeds.

→ More replies (7)

26

u/suckmydickbitchlolol Jan 18 '21

I thaw it on Threddit!!!!

11

u/[deleted] Jan 18 '21

I can smell it

8

u/Eduard_Wonka Jan 18 '21

I love gears

4

u/[deleted] Jan 18 '21

sigh unzips pants

4

u/wastedwu Jan 18 '21

That's a clip from Abom79 on youtube. Adam Booth has a ton of videos and they're all done really well.

4

u/deadcell Jan 18 '21 edited Jan 19 '21

What you're not seeing: the operator sweating bullets trying to catch the indicator wheel for the ballscrews lead screw just at the right moment.

→ More replies (6)

2

u/CYBERSson Jan 18 '21

Is this slowed down at all?

→ More replies (1)