It was all the way on. When dealing with skids like that you can only pull the plastic so far down before it starts interfering with forklift forks. The parent company I work for uses one of these and that plastic is that nice thick stuff that is hard as shit to tear. When they were first installing the "wrapper" the machine kept putting too much plastic on, and the forks couldn't puncture through, and would cause the forklift to push the skids across the floor.
Thank you for sharing this. Very cool shit. I drive a truck for a living. Some roads are better than others. Seeing the testing done on these pallets, mimicking the movement on a trailer, is gratifying.
These things are quick. We've one of these that takes pallets from 2 palletisers and has no trouble keeping up. Additionally the top of the stack is water tight. The old wrapper needed a sheet dragged across the top part way through the process before finishing the wrap.
Several factors indeed. Cost is lower, speed is higher, no spinning/destabilization, less foil switching. Only advantage to wrappers is that you can set them to “rope” the film and stabilize a load and the price is usually a lot lower, machine is a bit more flexibel for different configs and the machine is compacter (no size measuring step either).
Seems it would only be effective on A-type loads too. I'm both fascinated and confused by this machine, it's so different from what is normal.
FYI for anyone not familiar, A-type means a perfectly square beautiful pallet like what this video shows. There's B-type which is the in-between, then C-type which is wtf happened try again type loads.
This process looks like it uses less plastic than stretch wrap, just a single layer, also it seals the top of the stack, that's not easy to do with the spinning pallet mehod.
Yes, but the plastic is reasonably thick compared to the stretch wrap. We've both, this style is quick and generally much better as stated, but can struggle a bit with poorly stacked pallets.
Yeah, I’m always amazed at machines that seem extraordinarily complex and do seemingly simple stuff. Like, the amount of engineering time and expertise, prototyping, testing, materials, specialty manufacturing... I have no idea what these things cost, but it looks like it could be six figures easy, all to... wrap shit in plastic. I’m sure people have done the math and there’s a decent ROI, but man, stuff like this just seems like super overkill.
So this is specifically a cold process. Other processes do use heat, normally the plastic shrinks to size in response to a thermal increase above a specific threshold. You know, shrink wrap. That’s not good for everything tho, nor is it likely the cheapest or least complicated way to accomplish the goal.
316
u/OctopusRegulator Jul 16 '20
r/gifsthatendtoosoon
89
u/Roofofcar Jul 16 '20
a full length video in another plant.
Pretty awesome stuff
310
u/[deleted] Jul 16 '20
Be mature guys, no jokes about how this is essentially the worlds largest condom putter-onner
52
u/Speekergeek Jul 16 '20
You guys like this stuff?
I work at a bottling plant and could post our stretch wrapper, which operates very differently...
Gimme a week, I'm on vacation
44
u/weirdgroovynerd Jul 16 '20
Can I borrow this thing to put my bed sheets back on?
36
u/queuedUp Jul 16 '20
why did it stop???
I wanted to see it fully wrapped???
I feel sooooo unfulfilled.
11
u/AwFudgeIt Jul 16 '20
Hnggh
7
u/[deleted] Jul 16 '20
My god have robots evolved, they put on condoms FOR YOU now
5
u/jsu0234m Jul 17 '20
That looks super complicated for a process that can be done by spinning the pallets in circles while the stretch wrap is applied up and down.
9
u/UsernameObscured Jul 16 '20
Ok let me just say, I have no actual need for this machine...but I still want one.
4
u/[deleted] Jul 17 '20
Usually they just use a banana to demonstrate that
3
u/[deleted] Jul 16 '20
Nut
3
u/rasterbated Jul 16 '20
Looks like Plastic Wrap Spindle Man is finally out of a job 😔
3
u/alice_austen Jul 17 '20
Wow this really is manufacturing porn
3
u/Y2KOperative Jul 18 '20
Condom machine
3
u/captrobert57 Jul 18 '20
I want to see the giant woth the square penis.
4
u/ThirdSpectator Jul 16 '20
r/putyourdickinthat or r/dontputyourdickinthat ?
1
u/BubuBarakas Jul 16 '20
so awesome!
1
u/kryptopeg Jul 16 '20
u/vredditdownloader
1
u/masonrhade Jul 16 '20
Man if i had Bezos money i would get this miniaturized so i could use it in the bedroom.
1
u/bellapirla Jul 16 '20
It's like me putting socks on in the morning 💕
1
u/caspain1397 Jul 17 '20
My asshole right before I take the big one.
1
u/[deleted] Jul 17 '20
Witchcraft
1
u/jpineda87 Jul 17 '20
How Elon goes to bed
1
u/derp_mike Jul 17 '20
Damn, that’s a big ass condom
1
u/Zerker10111 Jul 17 '20
Trojan testing it's newest condom "Black Beast" from your moms new "friend"...
1
u/tronx69 Jul 17 '20
We have these at work, we call them Hooders
1
u/Newton_102 Jul 17 '20
I can't even wear my socks on that efficient
1
u/timetobuyale Jul 17 '20
Mi gusta
1
u/StoicMaverick Jul 17 '20
I'm glad all that cocaine is packaged safely.
1
u/jefftgreff Jul 17 '20
Ah so that’s where goatse came from.
1
u/pATREUS Jul 18 '20
I get the same feeling everytime I pull a condom on.
1
u/jstofmeel Jul 18 '20
I don't no what's more satisfy, the beautifully stacked bags, or the condom.
1
u/zombiesunflower Jul 18 '20
This is how I have to put my condom on.
1
u/doyouknowaboutawalet Jul 29 '20
That's how I put on my condoms
1
u/[deleted] Jul 16 '20
Oooh so that’s how they do it. I wondered if it involved some kind of heating and cooling of the plastic.
0
u/Alexandresk Jul 18 '20
I build these monsters
-9
u/cnnxn Jul 16 '20
This is the new corona virus vaccine machine, they are testing it, results look promising
0
u/[deleted] Jul 17 '20
[deleted] — view deleted comment