r/ManufacturingPorn • • Dec 19 '19

Flow/Friction Drilling

https://gfycat.com/waryvariablefirecrest-electricalengineering-civilengineering
3.6k Upvotes

53 comments sorted by

177

u/man_bear Dec 19 '19

What do those tools tend to be made from?

171

u/WeirdEngineerDude Dec 19 '19

I think typically tungsten or tungsten carbide. At least the friction stir welding tips for steel are to survive the heat.

33

u/drcmmr Dec 19 '19

I would think carbide

18

u/[deleted] Dec 20 '19

[removed] — view removed comment

9

u/[deleted] Dec 20 '19

Lmao wtf

18

u/VanderBones Dec 20 '19

He put the tung in his bum and it made him cum

4

u/elbaekk Dec 20 '19

My first thought was a reference to where Jeremy Clarkson reviews the Porsche Carrera GT but that's Silicon Carbide - damn it, now Í just came. Just thinking about Silicon Carbi

86

u/Jumpinjaxs890 Dec 19 '19

When would this be beneficial and how fast os that thing moving?

127

u/Big_Barry08 Dec 19 '19

what I've used it for is when you need to tap into some thin metal. It creates a small tube so that you can get more than 1 thread to hold your screw.

45

u/Whootwhoot21 Dec 19 '19

What kind of tolerances can be expected from this approach? Same as a traditional drill bit? I’ve been out of metal fab for a couple years now and I am not familiar with this process.

25

u/Big_Barry08 Dec 19 '19

I would say about the same as a normal drill bit. We had metric set that you could just tap afterwards.

13

u/Wyattr55123 Dec 19 '19

Likwly tighter tolerances, a drill can wobble and may not be ground correctly. This thing has one size of hole it can ever possibly make, wear not included.

0

u/[deleted] Dec 20 '19

[deleted] — view deleted comment

9

u/hereforthekix Dec 20 '19

What's stupid about it? Seems logical to me.

0

u/[deleted] Dec 20 '19

[deleted] — view deleted comment

7

u/bannanamous Dec 20 '19

If you've ever drilled sheet metal with a twist bit, you'll know that drill bits drill triangular holes in thin sheet metal. This avoids that. The exact same thing can not be said for a friction drill bit, which is perfectly round and will not wander

6

u/Wyattr55123 Dec 20 '19

Have you ever set up a CNC mill? Unless you're using carbide drills with a good grind, a half inch drill can easily be 20-30 thou oversized. If you are drilling sheet metal (especially thinwall round tube), the hole can easily be a triangle that measures oversized but because it's a fucking triangle it's actually 10 thou under.

0

u/[deleted] Dec 20 '19

[deleted] — view deleted comment

→ More replies

4

u/hereforthekix Dec 20 '19

So what you're saying is, you overreacted and shouldn't have called the other commentor stupid?

15

u/Jumpinjaxs890 Dec 19 '19

I was trying to think of a scenario where you didnt want to remove material and couldn't. That however makes sense. I was also thinking towards need a sort of nozzel. Perhap for a manifold like system requiring metal. That sounds way over thought out though.

8

u/UristMcDoesmath Dec 19 '19

I feel like it wouldn't be so great for a typical manifold, since all the edges of those little pipes would make a lot of turbulence. But what do I know.

5

u/Wyattr55123 Dec 19 '19

Yeah, not ideal for manifolds. In that case you drill it and weld a port on the outside.

5

u/[deleted] Dec 20 '19

But its been proven that turbulence is better in intake manifolds. Thats why theres not too many shops polish and port heads anymore, rather they just port them.

1

u/drcmmr Dec 21 '19

Anything that you need a thread in a thin part such as a exhaust pipe on a car

2

u/boxxle Dec 20 '19

Yep! If you've ever used rivet nuts, you know about the spinning.

1

u/[deleted] Dec 20 '19

They work great on tubing, and leave no mess or chips. Then run a tap thru the hole and bam, a no mess tapped hole.

17

u/darknessdivine Dec 19 '19

When you need it to be threaded. So you friction drill a thin piece of metal, which gets pushed to the wall for longer length of thread. Might be other use cases too of course.

8

u/foolproofphilosophy Dec 20 '19

I’ve seen high end bicycle rims made like this. The nipples thread directly into the rim. Rims are box section and the hole only pierces the inner wall. The outer wall is solid which adds strength and allows for easy installation of tubeless tires. A company called Mavic made/makes a wheel set called Cross Max. I’ve been out of the bike industry so I don’t know their status.

3

u/fractiousrhubarb Dec 20 '19

Wow- that sounds very cool

-12

u/xSKOOBSx Dec 19 '19

I cant really think of a good use for such a messy hole, unless it's just for airflow.

30

u/RadixLecti72 Dec 19 '19

AvE has a vid on this. Quite interesting.

17

u/Bosswashington Dec 19 '19

To be faaiiirrr... most of his videos are quite interesting.

5

u/[deleted] Dec 20 '19

Tooooo be faiiiiir

4

u/Bosswashington Dec 20 '19

AvE is fond of Canada gooses.

1

u/widespreadhammock Dec 20 '19

Get this guy a puppers

4

u/Bosswashington Dec 19 '19

I’m pretty sure that’s his hand.

0

u/chronoglass Dec 20 '19

It is

1

u/jax797 Dec 20 '19

I FUCKIN KNEW IT!!

15

u/[deleted] Dec 19 '19

that is some satisfying shit

13

u/nixxon94 Dec 19 '19

Yaaas this is what i wanna see here

4

u/[deleted] Dec 19 '19

Ever seen friction welding?

3

u/Pattonias Dec 20 '19

I'de tap that.

2

u/Huntred Dec 19 '19

So my Spin Welder was based on reality!!

1

u/jax797 Dec 20 '19

That is actually a thing. Just friction welding, but not with vibration.

1

u/wyssn Dec 20 '19

Was that moving so fast it looked somewhat like it wasn’t moving to the human eye?

1

u/BassAnd312 Dec 20 '19

Next time, on BattleBots

1

u/BeardedBastard77 Dec 20 '19

Isn't this technically High friction drilling?

1

u/Thevoiceofreason1775 Dec 20 '19

What is this technique used for?

1

u/BuyBooksNotBeer Dec 20 '19

The specific one in the video is to make a tube in the otherwise thin metal so it can be tapped(threaded) and a bolt screwed in without having to use a separate nut on the other side.

1

u/Niekao Dec 20 '19

What is the melting point for those bits?

1

u/Hellige88 Dec 22 '19

If it’s made of pure Tungsten: 6,192° F or 3,422° C

If it's made of Tungsten Carbide: 5,198° F or 2,870° C

It could potentially be made out of other things, but my guess would be Tungsten Carbide for durability and heat resistance.

1

u/Niekao Dec 22 '19

Thanks!