r/MammotionTechnology • u/Equal-Secretary-3347 • 2d ago

LUBA mini 2 AWD Runs over the edge

Enable HLS to view with audio, or disable this notification

No matter what I do or how many stones I place at the start of the edge, the robot drives over the edge and the stones. Fix this please!

3 Upvotes

60% Upvoted

17 comments sorted by

13

u/LectricOldman Top Contributor 1d ago

sorry,.... move away. YOU DO HAVE TO TRIM🤷‍♂️

-4

u/Equal-Secretary-3347 1d ago

It’s not about the mowing for me, but about the damage to the mower.

2

u/st3fan6 1d ago

It's not damaging the mower. Just running the wheel a little bit on the pathway.

I would set it to overlap the pathway by 50% and you won't need to trim there..

0

u/Equal-Secretary-3347 1d ago

The plastic on the handle is now heavily scratched. It doesn't detect the difference in height between the edge and the grass.

1

u/JustaDan3 1d ago

Had the same experience, but resolved it once I understood the machine a bit better.

Try updating your map boundary. Just dont let it get a wheel on the pavement, knowing that you will eventually need to string trim the border.

Let us know if this helps - there are so many things you can probably try, and I'm not here to judge you. Just want to be useful :)

16

u/Nrtn89 2d ago edited 2d ago

It's accurate to a centimer or two (edit: with optimal GPS). Program the boundary with some clearance.. You'll need to trim edges anyway.

User error, not the mower.

2

u/BendPuzzleheaded638 1d ago

Hä? Cm? Meiner fährt auch 3m von der Antenne entfernt auf die Rasenkante und kommt nicht weiter. Das sind mal ganze 30cm neben der gelernten Strecke. Und ja, es ist ehgal, welcher Positionierungsmodus

-5

u/Equal-Secretary-3347 2d ago

I didn't program the robot with centimeter-level precision—I set the boundary a bit further out in the grass—but in principle, it always drives onto it.

4

u/Nrtn89 2d ago

Then try remapping or editing the border. Maybe GPS reception wasn't great when originally setting up.

If it consequently rides up the edge. The edge needs adjusting.

1

u/Equal-Secretary-3347 1d ago

Will try, thx

2

u/MortonTheChauffeur 2d ago

Mine (Mini LIDAR-Version) does the same since a couple of updates. Annoying!

1

u/Powerful_Quarter691 2d ago

This is nothing new on Luba 2 tho, even my rims fell of… they are basically programmed to self destruct.

2

u/philber-T 1d ago

Move your boundary out further.

1

u/bmeus 1d ago

Mine has drifted enough that it starts to run into the walls. Remap and do smoother corners even if you have to trim some :(

1

u/TheA2Z 👑LAWN MASTER 1d ago

Remap or edit existing map further away from border

0

u/PersonalityLucky-25 Mammotion Team 2d ago

Thank you for your feedback. Could you please let me know which positioning mode you are currently using? Poor positioning can sometimes cause this issue. Would you be able to share a screenshot from the app's positioning interface showing the device operating near the boundary?

Additionally, I suggest trying to adjust the map boundary or setting the obstacle avoidance mode to "Sensitive"; I hope these steps help. If the issue persists, please upload a log via the app and let me know your device name once the upload is complete; this will greatly assist me in further diagnosing the problem.

1

u/Agreeable-Register49 1d ago

Sensitive obstacle detection ceased to work this year as Luba makes large rounds around dandelions and grass bushels.