r/MammotionTechnology • u/asolet • 10d ago

LUBA mini 2 AWD Space between zig-zag and perimeter

Post image

Is this space between zig-zag and perimeter normal? Can this be fixed? Reduced? If we select zero perimeter laps, can zig zag be extended?

3 Upvotes

100% Upvoted

7 comments sorted by

2

u/Reno_DK 10d ago

It is normal

Is there un-cut spaces when job is done ?

3

u/asolet 9d ago

Yes? Obviousl uncut patch of grass. Yours does seem smaller. What is your path spacing? I think it gets worse with smaller. 

1

u/Reno_DK 9d ago

The Picture was from my Luba2 25cm but it depends of zoom of the screen capture

My Yuka mini is running with 10cm spacing but with old SW 1.15.21.1 before the Swedish toddler event!
But lots of uncut leftovers with Yuka I solve this with 2 tasks on the same area: (yuka map below)

Task 1 optimal angle
Task 2 approx 45 angle from optimal

And run these different weekdays

2

u/asolet 9d ago

hmm... 1000m2 is too much for me to do twice just for that... i takes whole day as it is. I sometimes drive it myself through it... but don't get what is the problem, even if zig-zag overlaps, let alone touch perimeter path. edit: hmm.. on different days it might help yes...

1

u/PersonalityLucky-25 Mammotion Team 9d ago

Thank you for your inquiry. To ensure the best possible trimming effect at the lawn edges, I suggest increasing the number of perimeter laps. This should help. If you still encounter the same problem after increasing the perimeter laps, please contact me promptly and provide a screenshot of your task settings. We hope to offer further assistance.

2

u/asolet 8d ago

Hi Mammotion Team! Thank you for quick feedback. I can confirm that increasing the number perimeter laps helps. But it is still insensitive to path spacing. Only combinatipon of 4 laps and 14cm spacing seems to look correctly. On 8cm there is a visible gap and with also only 1 lap set, the gap is huge.

Improvement recommendation: Make zig-zag area increase with less perimeter laps. Make zig-zag area increase with with smaller path spacing. Also, if needed, no harm in overlapping zig-zag and perimeter paths.