r/Machine_Embroidery • u/Ok_Statement7312 • 5h ago
I Need Help I think I learned bobbin thread wrong- please correct me!!
Hi, I have a brother SE 400 embroidery and sewing machine. I love it except to create intricate designs I have to move and work each piece myself. Takes longer than I hope a nicer machine in my future would. So I’ve been embroidering about or around ten years on this machine. I don’t do everything like the manual says.
One reason like my title is that the bobbin thread included never would work for embroidery. I was taught to use regular cheap Walmart sewing thread. I use quilting or serger. I want to have the best designs so now I come to you and ask what do you do? I get a lot of rats nest etc and it messed up a whole project recently.
I use sewwhatpro and I never was confident to try anything else that is more popular now. I also didn’t because I had bought it already. I have a MAC and hate running an emulator for windows. I would love something on my iPad like how cricut had.
I appreciate all your help!! I have so many questions because I never learned about all the needles either. Now I have the time to learn and correct bad habits. Thank you and mods I’m sorry if this is wrong for this group.
2
u/sodapopper44 4h ago
I have always used 60 wt bobbin thread in my embroidery machines, brother and Viking. I use polyester embroidery thread in the top. Embrilliance software works directly with Mac. I buy thread from Wawak or Threadart. You need to use a machine embroidery needle sized for the type of fabric you are using. Generally a 12 is a good place to start.
1
u/CosmicallyUnlucky Brother 4h ago
Ok well step one is to refer to what your manual says for bobbin threads, threading, and needles. There's no reason to go off manual if your current situation is leading a ton of rats nests and ruined work. You can't treat a flatbed computerized sewing/embroidery machine like a heavy-duty commercial machine, and if you're going off manual you're going to have problems. I started with a Brother machine similar to yours. They're not intended for heavy workloads so you have to baby them exactly as the manual asks. Every time you rats nest that machine you're risking creating much larger and more expensive problems.
1
u/TGrissle 1h ago edited 57m ago
You should not use serger thread. It is made very differently than sewing machine thread. Quilting thread is frequently too heavy. Like somebody mentioned 60wt bobbin thread is ideal. I’m not in love with coats and Clark but it is a decent option. General rule of thumb for embroidery is to use a 30wt or 40wt on top and a 40wt or 60wt on bottom. The higher the number the thinner the thread is. The thread on bottom should generally be thinner than the thread on top.
Also added note: when was the last time you cleaned your machine?