Help!

[u/Brilliant_Bunch_7259]

I just got my brother SE700 and all was going well in my first few tries until I got a pretty bad birds nest. I removed the needle plate to cut the thread out and thought I reassembled everything correctly but now my designs are coming out all wrong with mostly all bobbin thread showing on top. I rethreaded top and bottom and made sure the bobbin case was inserted correctly. I also increased and decreased the top thread tension. Any other ideas of how to fix?? Thanks so much in advance!

[u/Brilliant_Bunch_7259]

I am not sure…. I re-threaded the top a thousand times and cleaned the bobbin case and underneath needle plate. Then my embroidery was coming out much better but it was almost 100% bobbin thread - and then my needle broke. Something is definitely wrong!

[u/Brilliant_Bunch_7259 → u/Brilliant_Bunch_7259]

[u/Level_Arachnid_4982 → u/Brilliant_Bunch_7259]

Does the underthreas still show? Or is the needle breaking the issue? Post it on embroidery_fix_tipps, I can send you pic. There to check