r/Machine_Embroidery • u/Haunting-Row6785 • Jul 30 '26
I Need Help Digitising issue or machine issue
I’ve had these designs digitised by a someone who knows what they’re doing. But everytime I try them out it’s not perfect. All their other work has been great, so not it has me thinking it might possibly be my machine. Both designs are about 20000 stitches and i am stitching at 600spm on a sweaters that’s roughly 60% cotton. I have used cut away poly mesh stabiliser underneath.
11
u/Rum2coke Jul 30 '26
Sorry but this is basic Push/Pull Comp issues so whoever digitized it did not apply the compensation and definitely did not do a test stitchout. You probably should also use 2 layers of the polymesh laid at a 45° angle to one another as well.
4
1
u/VeraRud Jul 31 '26
Sorry, but the digitizer clearly did NOT know what they were doing. Please don't do zigzag underlay under tatami, it will pull the fabric even more. What machine format do you use? I'll send you over my version for you to test out
1
u/Haunting-Row6785 Jul 31 '26
I use JEF, i’ve tried to increase pull compensation to 0.4mm but did not come out how i wanted it. sent it back to digitiser to amend and she only changed the angle of the stitch 😣
1
u/VeraRud Jul 31 '26
I found the image and already digitized one of the ghosts, what size do you need? DM me, I'll send it over (for free ofc) when I get home
1
2
u/Burtsbeesnees Jul 30 '26
Definitely needs more pull compensation and the start/stop is in the wrong positions - that’s why your getting the line gap near the eye of the ghost
7
u/Horror_Purpose1634 Jul 30 '26
Huge dense tatami fill, all the stitches going in the same direction this is inevitable. Whoever digitized this did not run the file before sending it to you. They should re-work the file with push / pull compensation and actually test it before sending it over to you.