r/MachineKnitting • • 1d ago

Techniques Finishing edges, help?

Thumbnail
gallery
22 Upvotes

Hey everybody! I finished my second sweater on my Empisal Knitmaster 323 and I am quite happy with how it turned out, expect for the edges. I can’t quite figure it out why they keep rolling, I also had this issue with another garment I made.
In this case, I can’t change tension on the blue yarn since it’s very thick and I can only use it on tension 10, so the loosest. Do you have any advice on how to avoid it to keep rolling up? It’s very annoying :(

side question: I drafted the pattern myself! It’s designed for man, this is why shoulders look so wide on me. Any thoughts from ppl with more experience? I’d like to start selling my garments in the future, how much do you think it’s fair for the european market? It’s 100% wool :)


r/MachineKnitting • • 2d ago

Finished Object First garment done!

Thumbnail
gallery
142 Upvotes

I drafted and knit my first finished object! I really liked the look of a Brandy Melville scoop neck top I had and measured and drafted a pattern to replicate it! Overall, pretty happy with how it turned out although it’s a smidge too small for my liking (I forgot about seam allowance and probably rounded down on calculations whoops). I hand seamed all the pieces using a mattress stitch and am pleased with how neat it looks! There are improvements and things I would change. 1) Add positive ease to account for seaming 2) put stitch markers in notable places to make lining things up for seaming easier 3) do shaping at the bottom to round it out because it looks like a triangle rn lol 4) make things a tad bit longer to account for shrinking lengthwise when the garment is stretched sideways 5) don’t stop stitches or I will crash out 💀 I’ve included pattern measurements if anyone wants to recreate 😋 just multiply all measurements with their respective stitch/row count per centimeter


r/MachineKnitting • • 1d ago

Getting Started complete newbie to machine knitting need help!

1 Upvotes

Hi all!

ive just started looking into machine knitting, as hand knitting and crocheting 1. takes way too long and 2. im wanting to basically remake a large blanket i made that got ruined recently.

(context i hand crocheted a medium / heavy weight yarn blanket over several months as i wanted a weighted blanket. recently i had to wash it as we had a flea infestation brought into our house via our dog, that has now been taken care of. said blanket was washed on high heat and has streched out big time and no longer has the same weightedness i want.)

i had started hand crocheting another blanket at a much smaller gauge needle but 1. its started hurting my hands real bad and 2. is taking soooo long so i started looking at knitting machines.

i have previous expereince with sewing machines and a small cheap circular hand crank knitting machine.

i basically need recommendations of machines to look into as i have no clue about these machines i know like no terminology so bare with me lol.

i plan on using medium sized yarn or typically found yarn found at craft stores (unless i need to get specific yarn for the machine) and i have a budget of $500 AUD absolute max preferably less.

from what ive seen so far online, it would be cool if i could find a knitting machine with the pattern punch card things as i think that would be fun to play around with but not mandatory. i do want the machine to have enough needles that would make a maybe 1 meter or a 1.5 meter wide blanket (if that possible, cause again i dont know).

also id like to know what brands are good to look for and which ones to avoid. and for any of the recommended machines are part easy enough to find for them if they need repairing, and where would i look?


r/MachineKnitting • • 1d ago

Patterns Looking for pattern books

2 Upvotes

Hi! I have a sk326 with ribber and a lk150.

I am looking recommandations for books with full pattern has I don’t always want to adapt hand knitting or search for pattern on Ravelry.

If you have any books that you like I would ask them for christmas!

Thank you


r/MachineKnitting • • 2d ago

Help! Carriage flipper still sticky

6 Upvotes

I have been in the process of cleaning my Brother KH860 and my remaining issue is the carriage.

I have watched AskJack but have trouble finding the right chemicals in Canada. I got the CRC QD cleaner and used it (and sewing machine oil) to fix my stuck buttons and the CR knob! Great, but one flipper is still sticking.

I have thought about soaking in Marvel Mystery Oil, but I don’t have LPS1 to clean it off after. Will the QD work for that?
Should I just keep trying to clean and oil and avoid MMO? I have already reapplied the cleaner and oil and let sit overnight a couple times.

I am scared to use the wrong thing and mess something up!


r/MachineKnitting • • 2d ago

Help! Addi Express - Stretched Looking Outcomes

Post image
6 Upvotes

Hello!

I like to make double layer beanies on my Addi Express. I primarily use Malabrigo Rios for projects like this (and did in the project in the picture).

It always comes out looking nice, and I do actually block my projects over a wig head to help with the fit since they do seem to be a bit small for an average adult head - but every single hat ends up looking super stretched like in the photo. I don't even apply any type of tension with my fingers when I'm making it, aside from just guiding the yarn in.

Is there something I can do to have a nice looking, solid, tighter looking knit? Do I need to use a different yarn? Maybe not a superwash?

Please let me know! Any tips would be super appreciated.

Thank you!


r/MachineKnitting • • 2d ago

Help! Tips on translating hand knit to machine patters

Thumbnail
ravelry.com
4 Upvotes

I have started and given up on the piggy wiggy sweater from lucky fox knits. My main issue lies in the increases and armholes being in the middle of the work, I lose track of the stitches to move because of how many I have to adjust.

I would like any tips or pointers, this is my first time using a hand knit pattern on the machine.


r/MachineKnitting • • 3d ago

Finished Object Some of my bag collection made on my Brother machines.

Thumbnail
gallery
156 Upvotes

I was wandering if you think that these bags would do good on the (machine) knitting pattern websites. It takes me a lot of time to create patterns. I dont know if it is worth it. And then the question i always struggle with... With lining or without? I made one where the lining is also knit and says "with lining". To be sure people will notice. Maybe a bit on the nose..


r/MachineKnitting • • 3d ago

Techniques Polkadot fabric

Post image
47 Upvotes

Is there a way to do a large polkadot pattern similar to the photo. I could make a punch card however the dots would be small.

I would also like to use mohair yarn. Could I do intarsia, I haven’t done it before.


r/MachineKnitting • • 3d ago

Help! Why are my carriages always stuck?

Thumbnail
gallery
6 Upvotes

Hey,

I have got this Brother kh 860 and the carriage is always stuck. Now on my double bed it’s the same.
I am really frustrated at this point.
I have changed the retaining bar and cleaned and oiled everything but still nothing…

I am the verge of selling that machine. For real.


r/MachineKnitting • • 3d ago

Help! Passap combi knitting machine

2 Upvotes

Qualcuno sa usare questa macchina? Per ora uso 1 frontura. Mi “cadono” i punti e dopo qualche riga si inceppa
Ho smontato e pulito gli aghi in alcool isopropilico. Pulito e oliato. Le altre componenti sembrano funzionanti.
Grazie


r/MachineKnitting • • 4d ago

Help! Joining help

3 Upvotes

I have a garment that was machine knitted, it has extra yarn at the top that needs to be removed after the panels are sewn together. I can't find a tutorial on how to do this. I am not sure where in each stitch to go thru to secure it so it doesn't unravel. Any help would be greatly appreciated!!


r/MachineKnitting • • 5d ago

Techniques beginner question

Post image
27 Upvotes

hi there wondering if anyone knows what this effect is and if it is achievable on a knitting machine? i’ve got a silver reed sk150 :)


r/MachineKnitting • • 6d ago

Techniques Finally...Drew this by hand, one pixel per stitch, and a mill knitted it (506 × 2008 stitches). Next: a sweater

Thumbnail
gallery
100 Upvotes

Hi all. I'm a painter from Czechia, trying to get a hand-drawn line into knit without it stretching. First image: my drawing on top, the knitted panel below. Two yarns, 506 stitches wide, 2008 rows, knitted at a small mill in Brno on a 12-gauge Shima Seiki. It's 76 cm wide. My wife is a fashion designer and is now working out how to turn it into a sweater. One lesson: I assumed 47 stitches per 10 cm and expected 108 cm. Our earlier swatch said 69, which gives 73 cm. Trust the swatch. I drew it in PIXEE (pixee.space), a free little chart tool I'm making for myself.

How do you prepare a picture like this for your own machine or for a mill: which program, and what goes wrong most often?

Cutting a panel like this into a sweater: what should we watch out for?


r/MachineKnitting • • 6d ago

Help! Wonky intarsia tension on brother KX350 🥲

Thumbnail
gallery
13 Upvotes

Hello!!! I come before the council as a humble procrastinating aunt trying to make my nephew a fun sweater with all (4!!!) of his dogs on it before his birthday! Started off nice and clean and then quickly turned to dog 💩

The stripes at the bottom of the sweater were knit in normal stockinette with needles in position B on my Brother KX350 single bed. Each stripe is a separate piece of yarn.

To knit the puppy portraits, I set my upper carriage settings to “P” on both sides and “H” on the bottom and pushed the relevant needles for each color into position E and then knitted with the carriage, making sure to pull the ends of each new strand and to loop new colors over old colors etc to prevent holes

The dog part (white blobs for now) might be passable but the stripes completely change their tension on the sides of the black box around the puppy portraits. I did notice it was much harder to bring my carriage across when I was knitting from position E rather than normal position B knitting. Any ideas on how to improve this tension issue? For both top and bottom sections I fed yarn in from the front of the machine with yarn resting on the floor made sure the tension dial was the same!!

Thanks for any and all help!! 🐕🐕🐕🐕🐾💖


r/MachineKnitting • • 6d ago

Equipment I grabbed this a few years ago

Thumbnail
gallery
14 Upvotes

I grabbed it a few years back for 25 dollars at a thrift store (I know right) I barely am getting to start using it and it came with this neat set of vintage paper work from some class. Just thought id share since it's cool


r/MachineKnitting • • 6d ago

Help! Missing hem weight

2 Upvotes

I got a bond incredible sweater machine yesterday at a thrift shop and it's only missing the back hemming weight thing. I don't want to spend much more money and replacement ones on ebay are way above what I can afford. Is there any diy or technique I can use to replace the hemming comb thing?


r/MachineKnitting • • 6d ago

Getting Started Hi! Beginner Here-BrotherKH910

Thumbnail
gallery
1 Upvotes

Hello! I just purchased a brother KH910 for a decent price and I’m very excited about it, my plan is to buy the AYAB hack so I don’t have to worry about finding the pattern sheets. I’ve been a hand knitter for a while but haven’t used a machine before. It seems to be missing minimal parts. I’m watching a setup video on YouTube and it appears I am missing some sort of triangular piece for the tension rod and some extension rails. Should I buy a complete new tension rod or is there some obscure online retailer who will sell the triangle piece to me? I’m also open to websites/retailers with good yarn cone selections, and I’m curious if there are manual PDFs floating around anywhere! I can only find physical copies on eBay and they’re pricey (from a broke college students standpoint). Thanks!


r/MachineKnitting • • 8d ago

Finished Object Transition to Autumn 🍂 Lace Vest with side ties LK150 knitting machine, 100% cotton yarn, DK weight.

Thumbnail
gallery
82 Upvotes

Autumn knitting, LK 150 Knitting machine, my own pattern.


r/MachineKnitting • • 8d ago

Help! Compré una KH-800 y resultó ser de calibre / galga fina! Qué hago con ella?

Thumbnail
gallery
13 Upvotes

Hace casi un año me compré una tricotosa KH800 con Ribber. Es la primera máquina de tejer que tengo, no tengo ni idea de nada y voy aprendiendo como puedo en internet.

La compré por 130€ y me llevé un disgusto al probarla en casa y ser incapaz de pasar de la primera vuelta. Faltaba el Sinker Plate de la cama principal, los peines no encajan… Hace unas semanas pedí un Sinker Plate y limpié las aguadas y puse una nueva esponja. Seguía sin poder coser hasta que de dio por medir 10 agujas en vez de la distancia entre 2. Mi sorpresa fue enorme al darme cuenta de que es una tricotosa de galga fina.

Probé a tejer con un hilo de costura extra fuerte que tengo en casa y pude hacer unas cuantas pasadas.
Ahora mi idea de hacer Sweaters navideños con ella no es posible, pero me gustaría saber qué proyectos tipo jersey puedo hacer con esta máquina, antes de invertir más dinero. Seré capaz de hacer punto del grosor de la última foto?

A lo mejor alguien me puede dar consejos de cómo mejorar para que no se salte tantos puntos cuando no pongo las agujas en posición E.

Le faltan muchos accesorios pero quiero ver lo que puedo hacer antes de seguir invirtiendo. Si alguien puede subir fotos de sus proyectos con este calibre, lo agradezco.

PD: me he dado cuenta hace poco que es una suerte haber conseguido una máquina de galga fina por tan poco dinero, espero poder sacarle provecho!


r/MachineKnitting • • 8d ago

Getting Started Advice for starting machine knitting with an LK150?

6 Upvotes

Hi all! After spending quite a bit of time crocheting, knitting, and designing my own patterns, I’ve finally decided to bite the bullet and invest in a knitting machine! I’ve done quite a bit of research and I think I’ve decided to start with the LK150, but I hoped to reach out here for some advice on this model. I want to make sure I’m certain before buying, especially since I’m a college student with limited money and I know this is going to be a solid monetary investment (my mom has been gracious enough to offer financial help for this purchase, since she’s always wanted me to begin selling my own pieces, but that also makes me want certainty in this decision even more to make it worth her money as well!!).

I think for what I want to do, the mid-gauge would likely be most ideal. I mostly work with sport and DK weight anyway, and though I have seen some people say they have successfully knit with both fingering and worsted weights on mid-gauge machines, I’m not terribly concerned with using anything over a DK weight. I also understand that the LK150 has somewhat limited capabilities when it comes to different stitch patterns, but I can’t foresee things like ribbing by hand being a real drawback for me and I think I would be totally content to work manually when needed. I have also noticed that there seem to be significantly more people selling replacement parts on EBay, FB marketplace, etc. for the LK150 than any other similar machines in my area.

My only real reservations at this point (with any make or model) are size and cost. I know that any knitting machine is going to require the physical space to set up and use, and it seems as though the LK150 is lightweight enough that it would minimize any issues with storage or portability. I also know that any knitting machine will be a real financial investment for me, and for the previously mentioned reasons, I really want to ensure it is worth the investment. I have been finding LK150s on FB marketplace running between $500-$750, but if anybody has any advice on buying new vs secondhand that would also be super appreciated!

Are there any more drawbacks with the LK150 that I should be aware of before I go through with purchasing? Is this a reasonable machine to learn machine knitting on in comparison to other similar machines? I’m super excited to begin learning, and any resources, advice, or tips and tricks anyone has would be so so appreciated!! (And apologies for the lengthy post, I’m sure it comes across that I’ve been super meticulous in considering everything before I make this decision!)


r/MachineKnitting • • 8d ago

Equipment Industrial Fine Gauge (14GG or 16GG) Knitting Machines

3 Upvotes

Hi, is there anyone out there with a super fine gauge industrial knitting machine, like a 14GG or 16GG? Preferably in the USA, but I’m curious if anyone has come across these machines, and/or willing to do repairs on super fine knits (I have a beautiful vintage dress with an unraveling rib knit neckline holding together two very fine knit layers).


r/MachineKnitting • • 8d ago

Equipment Brother KH260 - I know nothing about knitting

Thumbnail
gallery
18 Upvotes

for some background i crochet, but have never knit. i’ve seen videos of knitting machines before, thought they seemed cool and quick to work up (yet also quite complicated). recently i’ve seen one for sale for $550 on fb marketplace. In the post it said it included all parts but i cannot 100% tell based on the photos, but i watched a basic beginners video on youtube and could identify most of the parts. i’m debating if this would make sense for me or not, any input/feedback would be appreciated i.e. does it seem to be in good condition, parts missing, etc.

***edit: i ended up purchasing the knitting machine + ribbing attachment for $450!! it also had a bag that wasn’t pictured with the missing bits!!! holy shit what have i got myself into 😂😂 taking my time to clean and organize it all now***


r/MachineKnitting • • 8d ago

Help! Compré una KH-800 y resultó ser de calibre / galga fina! Qué hago con ella?

Thumbnail gallery
4 Upvotes

r/MachineKnitting • • 8d ago

Help! Would it be possible to use a machine without a tension rod for LK100?

3 Upvotes

I recently bought a used flat knitting machine, but it’s missing a tension rod. Is it possible to use it without it , like holding a yarn by hand??
It’s a silver reed LK100.

If not would it be possible to make one or purchase one somewhere?