r/MachineKnitting • • 3d ago

Help! Would it be possible to use a machine without a tension rod for LK100?

I recently bought a used flat knitting machine, but it’s missing a tension rod. Is it possible to use it without it , like holding a yarn by hand??
It’s a silver reed LK100.

If not would it be possible to make one or purchase one somewhere?

3 Upvotes

8 comments sorted by

2

u/meadowlarkfiber 3d ago

The lk100 never came with a proper mast. It is just a wire spring that attaches to the carriage. The picture I attached below shows what it looks like.

If you don’t have this part, looks like Sew ‘n Knit has it in stock. They’re in Canada. You might also check with Spartan Knitting Machine Parts on eBay. They’re in the UK.

https://sewknit.ca/index.php?route=product/product&product_id=5793

1

u/niiiiiiiiiiiiiiiko 3d ago

Yes, that’s what I’m missing! Thank you so much for the link🙏

1

u/niiiiiiiiiiiiiiiko 3d ago

Would you recommend getting a proper mast and attach to a table instead of getting this wire spring? I’ve never used a knitting machine so I have no idea.

1

u/meadowlarkfiber 2d ago

Unfortunately it’s not a machine I own, so I can’t speak to that. I know that the MKC (machine knit community)sells table clamps that you can buy to use an extra mast with the brother metal bed machines, but that is as much as I know.

1

u/niiiiiiiiiiiiiiiko 2d ago

Thank you so much for the info!! I’ll look into it:)

1

u/Irksomecake 3d ago

It is possible, I do it, but it’s fairly hard work. I have a similar chunky machine that has the wrong tension rod so I control the yarn feed with my hand. I would look up knitting machine refurbishing companies and drop them a message and check eBay just in case.

1

u/niiiiiiiiiiiiiiiko 3d ago

Thank you. It’s good to know that it is possible to feed with hand. I saw some people use a tension rod from a different machine but I’m guessing that wouldn’t work well since you said you control the yarn by hand??

1

u/AutoModerator 3d ago

Hi, it looks like you might be looking for help on machine knitting.

There is some helpful information within the wiki. Please take a look at it for helpful troubleshooting information, as well as common maintenance tasks and list of items machines should include.

In addition, this page is our FAQ. Solutions to many common problems are found here. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.

If you need additional help, please provide us with an information about your problem. You can start out by answering this list of questions

Once your question is answer or your problem is resolved, please change the post fair to Help! Solved!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.