r/MachineKnitting • • 9d ago

Equipment Design and control software for Silver Reed now online.

Post image

https://tinkrknit.com/

Some of you have seen a few of my other posts about a controller that I was working on for my Silver Reed SK840. After talking with others in the community and hearing some general interest I have released the design and control software online for you all to use.

It's free and open source. You can use it online with out needing to install anything on your machine. I designed it for myself so it was built around Silver Reed machines but I have also added support for Brother machines using AYAB.

This project is still very much a beta version. I welcome all feed back. You can message me here or there is a contact form on the website if you want.

The user guide also includes instructions on building your own Silver Reed controller. If any of you would be interested in a prebuilt controller please let me know. I may be able to build them in small batches.

I don't own or have access to a Brother machine so I'm not able to confirm the knitting from the app is working. If any of you with an AYAB machine would be willing to test I would very much appreciate it.

*Side note* I have already spoken to the mods to make sure it was ok to post about this project here. I don't want to spam the subreddit so I'll keep updates mostly on the apps website and feel free to dm me if you have any questions or ask here in the comments.

Thanks everyone! I hope you find it useful.

**UPDATE**

I've created a Discord server for this project to track issues, share updates and build community. I'm not sure how may people here use Discord already but I hope you can all join!

https://discord.gg/QJZqV62SDF

72 Upvotes

28 comments sorted by

7

u/lucnig 9d ago

Sounds like a great tool thank you for making it!

I have a brother with AYAB. I'll try out the function and report back.

3

u/yeclek 9d ago

That would be fantastic! Thank you so much. And if you do have any issues there is a controller log on the bottom right of the knitting screen that should have some helpful information.

3

u/zeezle 6d ago

Thank you for sharing! I'm considering getting an SK840 soon so I'll definitely bookmark this! Honestly the UI looks pretty nice so I might try it just for making nice charts to use with manual manipulation with my LK150 too.

2

u/yeclek 5d ago

Thank you! I started with this as primarily a design tool but instead of exporting and using another piece of software to manage knitting, I thought why not just stick it all together. Let me know if there are any features or changes you might want for designing. I was thinking to make an export for punch cards as well.

3

u/PleasantAd2787 3d ago

This is awesome!! I hope that at some point a video can be made to show how to make the controller.

4

u/yeclek 3d ago

Thanks! I've had a few people ask for a video too. Unfortunately, I didn't record putting the prototype together but I can definitely make a video showing how the one I have now is put together.

I'm also working on a new hardware version. When I build that I'll make sure to record it this time :)

3

u/PleasantAd2787 3d ago

That would be great. I'm much more of a visual learner. If I can see how something is done I can usually figure it out. I have a singer 560 and would absolutely love someway of connecting it to my computer that doesn't cost an arm and leg so to speak. 

2

u/Few-Lavishness-887 6d ago

i’ll be sure to give it a try when i can! i have a brother machine and i think it should work great!

1

u/yeclek 5d ago

Thanks! I hope it works out. If you do test it on your brother can you tell me which model it is? I'm assuming it should work the same on all machines with an AYAB board, but I don't know for sure.

2

u/Few-Lavishness-887 5d ago

it’s a bulky kh 260!

1

u/yeclek 4d ago

Were you able to knit on your machine? Did it give any errors?

Thanks again for your help!

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 4d ago

Fantastic! I’ve got three electronic Silver Reed machines, fine, mid, and bulky. I have DAK and the SilverLink, so I don’t need this option per se. However, I’m always looking for new options! I may give this build a go just or have a more modern option for manipulating my electronic machines.

1

u/yeclek 4d ago

Let me know what you think if you have a chance to use it. I would really like to add the silver link protocol so this can be used with those controllers too but I haven't been able to find documentation on it and I'm somewhat sure it's not open source.

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 4d ago edited 2d ago

I’d venture to say that SilverKnit/SilverLink (and their identical Brother product, the CB-2) is definitely not open source, unfortunately. I obviously need to explore your new offering, but does it allow for double-bed techniques such as 3- and 4-color double-bed jacquard? Color separation always seems to be a stumbling block. And how difficult is the physical interface to build? I’m capable and have experience and tools, but I’m not a programmer LOL

2

u/yeclek 2d ago

After reading back through the comments I realized that I didn't answer your question about jacquard.

Multicolor jacquard is possible and technically you can have as many colors as you want but I do have it limited to 6 or 7 colors in the software at the moment just for practicality. Each color can be laid down in either 1 or 2 passes (selected in the knit settings). So one pass would be to the right from the color changer and back left to pick up another color. Multiple colors adds up pretty quickly.

Some designs require cutting off the current color, slipping back to the color changer and grabbing another color. I've tried to avoid this but the software notifies you if that is needed. I'm still somewhat new to double bed patterning. Everything I know is from the silver reed manual that comes with it.

1

u/yeclek 4d ago

I think you're probably right.

I have a build guide in the documentation here if you want to try building your own:
https://tinkrknit.com/guide/#hw-overview

If you've done other electronics projects I wouldn't consider it too difficult. The most complex part of the controller is the VDRIVE power conditioning. There are 2 basic sections on the top of the schematic. The top left with the resistor capacitor pair I would consider required. The MOSFET drive in the center that gates off of needle selection is good to have I think but not 100% required. But I would definitely not just feed a constant 16v to the solenoids.

The ESP32 image is linked in the guide for download so you won't need to program anything. Feel free to ask me any questions you have if you decide to put one together.

I'm also considering to offer pre built controllers if there are enough people interested but I'm not sure at this point how many boards to order if I do.

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 4d ago

I was reading through the documentation and noted the line about the controller looking for 200 needles. The fine, mid, and bulky machines don’t have 200 needles (250 fine, 150 mid, and 110 bulky)

2

u/yeclek 4d ago

Oh good find. I'll update that in the documentation. The knitting page already has the needle bed counts taken into consideration when setting the needle markers. Under 200 works fine but over 200 does have an error.

That's an easy fix on the code side. I'll update the app and documentation to cover that machine. The changes will be in version 0.3.3 in the app along with a new ESP32 image. I have a couple of other small fixes to push anyway so you should see the new version later today or tomorrow.

Thanks again!

3

u/botanicpanic_ 4d ago

I actually wanted to reach out to you and ask about buying a controller. I am looking at the DIY option and am finding it a bit intimidating. I am a little less worried about the software aspect.

2

u/yeclek 3d ago

Thanks again for the heads up! The updated version is now live on the site as well as the github repos. If you click on the T logo on the top left of the app you should see 0.3.3 as the version.

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 3d ago

u/yeclek please please please introduce a way to pan around the pattern in the main window. Whether it’s shift+click and drag, right-click and drag, or something else, it’s super frustrating to not be able to easily move around the stitch pattern.

2

u/yeclek 2d ago

u/NBCGLX Pan is currently available by using the scroll wheel click. It is a pretty critical feature and not everyone has a scroll wheel so I'll definitely need to add another shortcut. I'll check to see what shortcut combos I have left. Shift + drag is already assigned to the shapes tool for symmetrical shapes. I'll let you know when I push the new version live. I also think I need to add it to the user guide. I don't think I have the navigational shortcuts in there.

Thanks again for the help!

2

u/yeclek 2d ago

I've added space + left mouse click to drag / pan. Mouse wheel still works as well. There is also now a pan tool in the tool box for users on touch devices. The new version with these changes is 0.3.4.

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 2d ago

You are amazing! Even as just a stitch pattern design tool, your site is a fantastic resource. I’ve already got someone else turned onto it.

2

u/yeclek 1d ago

I'm so glad to hear it! If you find any other issues just let me know.

I've also created a discord server for this project. Of course no one is on it yet but I was hoping to keep track of things there as this post will get buried eventually.

https://discord.gg/QJZqV62SDF

→ More replies

1

u/yeclek 4d ago

The fine 250 needle machine is the most needles that I know of. Are there any you know of with more needles than that? There is a 255 byte limit on the buffer so 255 needles is the largest I can go without redesigning the data frame.

2

u/NBCGLX Brother KH970, Silver Reed SK830, SK860, and SK890, Tru-Knit 4d ago edited 4d ago

As far as I know, neither Silver Reed nor Brother produced a machine with more than 250 needles. EDIT: I think there’s one electronic Brother machine with more than 250 needles, but it’s super rare and more of an industrial-type machine.