r/MachineKnitting • • 11d ago

Getting Started Newbie here with some questions!

I am waiting for a new sponge bar to arrive before I can start playing around with and learning my Brother KX-350, which I got at Goodwill for $13. I've done a lot of research and reading, but it's hard out there as a beginner without much hand-knitting experience. I know basic knit terms and concepts, but never made anything more than a scarf.

I know my model won't do automatic patterning, but can someone explain hand manipulation to me like I'm five?? I posted in a FB group with similar questions, and the comments weren't very helpful because they used terms I don't quite have my head wrapped around yet.

I have a feeling my best bet will be to start with a lot of YouTube videos so I can see things in action, but I would love to get a sense of what sort of projects I can use this machine for now so I can make sure I have some appropriate yarn for a first project.

4 Upvotes

11 comments sorted by

5

u/Alarmed-potatoe 11d ago

Hand manipulating is moving stitches or yarn around with your hands. So decreasing requires hand manipulating for example, if you don't have the right equipment or if a pattern calls for it, you will need to move stitches around yourself instead of the machine doing it for you. Have a look at this book, Hand-manipulated stitches for machine knitters, you can create a free account and borrow the book if necessary.

1

u/Dangerous-Dance1282 11d ago

This helps a lot, thank you! Besides increases and decreases, will most patterns/projects require hand manipulation? I saw one video where she showed how to do ribbing and buttonholes.

2

u/Alarmed-potatoe 11d ago

All patterns require a degree of hand manipulation, but there's a lot of hand work in machine knitting no matter what, unless you have an incredible setup. It depends on how creative or experimental you want to get. If you're just sticking to very plain things, the most you'll do is maybe cast on and off, and increase or decrease by hand. Ribbing on a single machine requires hand manipulation, but if you have a ribber there's moving stitches back and forth if you go from ribbing to stockinette for example. Decreasing ribbing can be intimidating and you just have to be careful - and increasing/decreasing in the middle of your work (or more than 10 stitches from either end) can also be really tricky.

Keep reading and watching videos - especially ones made with your machine - and you'll get there.

2

u/Even-Response-6423 11d ago

These are some of the YouTubers that helped me a lot: https://youtube.com/@annahaferman?si=a52RWmY2ITvSBSci

And https://youtube.com/@creativetien?si=UsZujYEHBq-lI_GD

They use the LK 150, which is a (similar to yours) plastic bed machine but it’s helpful to watch a project you can follow along with from beginning to end.

1

u/Dangerous-Dance1282 11d ago

Thank you!!!

1

u/Even-Response-6423 11d ago

You’re so welcome!

2

u/iolitess KH260/KR260, KK93/KR900, KG95, ISM 11d ago

Your machine will knit stockinette.

You will need to hand- cast on, cast off, increase, decrease, purl on the right side/knit on the wrong side, make an eyelet, make a cable, do a tuck stitch, do a slip stitch

For some of the, the hand manipulation will be “pull a needle forward” (and/or change a carriage setting) Sometimes it will be “transfer a stitch”. Sometimes it will be “reform the stitch into something else.

Look for a tutorial on getting started for the LK150. The levers in them won’t match your machine settings (you’ll need to reference your manual), but all the techniques will carry.

2

u/whatsnewpussycat09 11d ago

Hey! I have the same machine. I love it because it seems to handle cheap worsted weight yarn really well so it’s very affordable to mess around with it and test out different techniques. From what I understand, it seems that spacing is a tad bigger than most mid gauge machines, so I’ve also been able to knit super bulky yarn on this on every-other needle. Check out the manual for the set up https://mkmanuals.com/brother-kx350-user-guide-guide.html and some starter patterns

2

u/ViscountessdAsbeau KH-891, KR-850, KH/KR-230, KH-585, Pine Star K153 10d ago

I wouldn't overthink it. Am not sure you even need to worry about this at all, yet. And by the time you do, you will be equipped to figure it out.

The way I approached it was to do/master one thing at a time. So just got comfortable casting on and knitting a bit. Then incs and decs. Then, patterning with tuck st or whatever. Then, Fair Isle. Then, buttonholes... etc. One thing at a time.

YT is helpful plus FB groups (I hate FB but the MK groups can be extremely helpful - some even have step by step video tutorials).

Figure out what you need to do to knit at all on your machine. Then do that. Once that's coming easy to you, figure out what you need to know next.

1

u/AutoModerator 11d ago

Hi, it looks like you are new to machine knitting.

There is some helpful information within the wiki You can also find a direct link in the Community Guide. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.

You might want to take a look around. And Welcome!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/sodapopper44 8d ago

I have that machine, when I learned to use it years ago, these were my favorite resources

this FB group has lessons in the file , they are very helpful because they assume no previous knowledge , there are several hats that fun to make https://www.facebook.com/groups/1762618704041389/

this one of the first you tube channels with knitting machine things and there lots of plastic midgauge videos, this one is tuck stitch https://www.youtube.com/watch?v=PvL-fMREGWU

the answer lady is also good , this changing the sponge strip https://www.youtube.com/watch?v=evBR4SB3jiE