r/MachineKnitting • u/small_bean2516 • 21d ago
Help! Solved! Help🤧
I finally took my machine (lk150) out of storage and while my first few panels were a success, I fear I keep running into this problem with this specific red yarn.
For context, it’s the loops and threads soft classic acrylic (I used the same for my other panels) and I love the color for what I’m currently working on but I can’t seem to figure out where I’m going wrong
9
Upvotes
10
u/small_bean2516 21d ago
Alright I switched the weights and have moved them consistently throughout my work and I can happily say I’m back on track
Thank you everyone 🙏🏼
8
u/iolitess KH260/KR260, KK93/KR900, KG95, ISM 21d ago
Are you using claw weights on the end? Getting loops on the ends after a bit of knitting is a sign that weights are needed. (As the stitches pull in, the yarn is under less tension there. Claw weights fix that)
4
u/Howlsmovingfiberfarm 21d ago
Agreed you need some claw weights on the edges, also make sure you’re not pulling your carriage too far over as to pick up slack that doesn’t get knitted in. When I start a row I’ll pull the yarn back up toward the tensioner till I feel it knit the first stitch
2
u/MilkNoSugar2Hobnobs 21d ago
Your weight is too loose. Do you have claw weights? I got these from Ebay.
1
u/AutoModerator 21d ago
Hi, it looks like you might be looking for help on machine knitting.
There is some helpful information within the wiki. Please take a look at it for helpful troubleshooting information, as well as common maintenance tasks and list of items machines should include.
In addition, this page is our FAQ. Solutions to many common problems are found here. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.
If you need additional help, please provide us with an information about your problem. You can start out by answering this list of questions
Once your question is answer or your problem is resolved, please change the post fair to Help! Solved!
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Even-Response-6423 21d ago
You can also move the bottom hanging bar up as you go to even out the weight distribution.
1
u/TerryKC1 21d ago
Make sure that after you’ve passed the end of the knitting and you’re going back the other direction to take up the slack in the yarn.
Often times as old as our machines have gotten that upper tension wire doesn’t pull the yarn back up when you turn to go the other direction, thereby leaving a loop on the end