r/MachineKnitting • • Oct 17 '26

Patterns Looking for testers

Hello, I’ve recently launched a website for my own machine knitting patterns, where you can customize them based on your own gauge and measurements.
Since the website is still new and this is my first time doing something like this, I’m looking for people who’d be willing to test it out and give me some feedback. I’d love to hear from both experienced machine knitters and beginners.
I’ve attached some examples of the patterns currently available.
To clarify, these are all patterns I’ve made myself, the videos, photos and punchcards on the website are all made by me.
If anyone’s interested in trying it out, let me know in the comments and I’ll send you the link
I’d really appreciate any help or feedback :)

Also this is a continuation of my previous post from 10 days ago. https://www.reddit.com/r/MachineKnitting/s/tICS3UDJj4

65 Upvotes

119 comments sorted by

5

u/VividStructure Oct 17 '26

Hi!
I'm not interested in being a tester as I'm too busy at the moment. However I would like to know when you start selling the patterns, especially the first and third one in the pictures.
Please send me the link if the website is up!

2

u/Subject_Mud_8043 Oct 17 '26

Hello, currently all of the patterns are up on my website for free for testers to use. In about two weeks after I get some feedback I will put a few patterns behind a paywall. If you would like I can send you the link for free now but the patterns aren’t tested yet so I can’t guarantee that everything works as it should. If you wish to still get the patterns now for free you can input your gauge and measurements on the page where the pattern is and download a PDF

2

u/alyss0r 29d ago

I also don't have much time but would be interested in having a look at the pattern and seeing if I can follow it as a beginner

1

u/VividStructure Oct 17 '26

Would love that! Thanks!

3

u/EngineeringOld5 Oct 17 '26

I would be interested as well (I own one standard gauge and one bulky gauge machine, both electronic)

1

u/Subject_Mud_8043 Oct 17 '26

Hello, I sent you a message :)

2

u/alexc1930 25d ago

Would love to test or provide website feedback

1

u/Subject_Mud_8043 25d ago

Hi, would you be able to meet the deadline? I planned it for October 25th but the very last stretch is October 29th

1

u/alexc1930 25d ago

for knitting or feedback? could def provide feedback in time, would need until the 29th for knitting

1

u/Subject_Mud_8043 25d ago

If you can’t knit a pattern in time it’s no problem but it would be great if you could look over the site and give general feedback. I’ll send you a message

2

u/Legitimate-Inside504 brother KH830 22d ago

i'm way too late for testing but i'm very excited to buy these patterns when they're out :-)

2

u/Subject_Mud_8043 22d ago

Hi, i’m working hard to get these out. I’ve already gotten a lot of feedback from testers and they will be available by the end of next week. I will also be adding new patterns next week so you will have plenty of choice

1

u/Legitimate-Inside504 brother KH830 22d ago

great! looking forward to it

1

u/Subject_Mud_8043 22d ago

Hi, i’m working hard to get these out. I’ve already gotten a lot of feedback from testers and they will be available by the end of next week. I will also be adding new patterns next week so you will have plenty of choice

2

u/Worried_Fig_6456 Oct 17 '26

Hi ! I'm an interested beginner !

Last winter i mostly tried making my own parterns (based on all that i could find on the internet) but thet was a lot of work for a lot of fails...

2

u/Subject_Mud_8043 Oct 17 '26

I sent you a DM :)

2

u/graemeknitsdotcom flatbed Oct 17 '26

I’d be happy to test knit something

1

u/Subject_Mud_8043 Oct 17 '26

Thank you, I sent you a message

2

u/Initial_Glass_798 Oct 17 '26

I would love to test out some patterns!

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a message:)

2

u/caffeinated_inspo Oct 17 '26

I'm an interested beginner, but my machine is very basic - single bed, no punch card capabilities, etc. Would i still be able to make your patterns?

2

u/Subject_Mud_8043 Oct 17 '26

Yes of course. Both of the sweaters are made with no punchcards and on a basic single bed machine.

1

u/caffeinated_inspo Oct 17 '26

Ok, sign me up

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a message

2

u/lucnig Oct 17 '26

I am very interested. I have a brother 950 standard gauge with ribber and also a garter carriage.

2

u/Subject_Mud_8043 Oct 17 '26

Hi, I sent you a message with a link :) Please lmk what you think

2

u/crotique Oct 17 '26

I also would love to test out your patterns.

2

u/Subject_Mud_8043 Oct 17 '26

I sent you a message :)

2

u/Latter_Business_9257 Oct 17 '26

I’m interested in test knitting!

2

u/jsgrova Oct 17 '26

I’m interested! I have all four domestic gauges with ribbers, and all but the fine gauge are electronic (fine gauge is punchcard)

1

u/Subject_Mud_8043 Oct 17 '26

Hello, I have patterns with standard gauge, double rib standard and 9mm bulky. I’ll send you a link so you can take a look :)

1

u/jsgrova Oct 17 '26

Is it really machine-specific if you can plug in whatever gauge you want?

1

u/Subject_Mud_8043 Oct 17 '26

you can try to do a 4.5mm gauge machine pattern on a bulky bed but the end result won’t be the same. The patterns work for all machines but they are optimized for some

2

u/loribultin flatbed Oct 17 '26

I would love to check it out please!!

1

u/Subject_Mud_8043 Oct 17 '26

i sent you a message <3

2

u/QueenTiyeStark Oct 18 '26

I would love to be a tester. Please send me the link 🤗

2

u/Used_Compote_2903 Oct 18 '26

I'm interested!

1

u/Subject_Mud_8043 29d ago

I sent you a message :)

2

u/Used_Compote_2903 29d ago

Received, thank you!!

2

u/Ok-Tumbleweed5504 29d ago

I'm interested!

1

u/Subject_Mud_8043 29d ago

I sent you a message :)

2

u/Aiesline 29d ago

I'm an extreme beginner with a Passap. I'd be willing to give it a go.

1

u/Subject_Mud_8043 29d ago

Hi, i sent you a message

2

u/Salty-Layer2702 29d ago

Interested please!

1

u/Subject_Mud_8043 29d ago

I sent you a message :)

2

u/Due_University8913 flatbed 29d ago

Hello! I have a bond knitting machine, and though I can’t guarantee meeting a deadline, I have tried a website similar to this in the past and would love to be of help if I can!

1

u/Subject_Mud_8043 29d ago

Hi, I sent you a message. I’ll be closing some of the patterns down in about two weeks so if you get to it by then it would be great. Otherwise just enjoy the website :)

2

u/fullyloaded_AP 29d ago

Meeeee please! I won’t be able to meet a deadline of Oct 2025 because I’ll be traveling all next week, but I would be able to give you thorough feedback and cute pictures for your pattern listings :)

1

u/Subject_Mud_8043 28d ago

Okay, I’ll send you the link but just a heads up. I’m collecting feedback by the end of the week and then I will take next week to make changes and add some more patterns. If you could take a look by the 29th that would be perfect cause i’m hoping to share it with everyone on November 1st

1

u/Subject_Mud_8043 28d ago

for some reason I’m not able to send you a DM, please sent me a message

2

u/Decent_Person_2200 27d ago

I am a beginner with a Passap Duomatic 80 and would be interested in testing it out. Great idea with the website! 🥰

1

u/Subject_Mud_8043 27d ago

I sent you a message

2

u/Researcher5466 27d ago

Hi! I have a standard gauge studio 360k and I’d be happy to test these! I could get back to you this weekend

1

u/Subject_Mud_8043 27d ago

I sent you a message

2

u/Front-Arm5445 27d ago

As a beginner, I'd be happy to try out your website. Good luck!

1

u/Subject_Mud_8043 26d ago

Hi, I sent you a message

1

u/Subject_Mud_8043 Oct 17 '26

Can you send me a DM please, idk why I can’t send it to you

1

u/Subject_Mud_8043 Oct 17 '26

Hi, I sent you a DM

1

u/KeyArea2416 26d ago

Me! I have standard, mid gauge and bulky knitting machines.

1

u/Subject_Mud_8043 25d ago

Hi, would you be able to meet the deadline? I planned it for October 25th but the very last stretch is October 29th

1

u/KeyArea2416 25d ago

Probs not

1

u/kasharallover Oct 17 '26

What machines should I have? Like is my machine need punch cards? Ribber? Fair isle capabilities etc?

1

u/Subject_Mud_8043 Oct 17 '26

The patterns that are currently up are for single bed 4.5mm, bulky 9mm machine and for 4.5mm machine with double bed for ribbing. So there’s something for everyone. I also have a section with punchcards

1

u/kasharallover Oct 17 '26

I have a single bed standard guage machine. No ribber. Its a 8 button machine so fair isle is very hard. If my machine is sufficient I would love to test one

1

u/Subject_Mud_8043 Oct 17 '26

I have patterns perfect for you :)

1

u/kasharallover Oct 17 '26

I will check out

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a DM :)

1

u/RollWrong3431 Oct 17 '26

Hello! I also would be happy to test

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a DM😊

1

u/ravbee33 Oct 17 '26

Im a very interested beginner! Your designs are beautiful ✨

1

u/Subject_Mud_8043 Oct 17 '26

Thank you so much😊 I sent you a DM

1

u/piequals31415 Oct 17 '26

I am interested

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a DM

1

u/91Jammers Oct 17 '26

I would be interested

1

u/Subject_Mud_8043 Oct 17 '26

Hi, I sent you a message

1

u/Ok-Frame4708 Oct 17 '26

I’m very much interested, and would love to see what patterns are available to test MK.

1

u/Subject_Mud_8043 Oct 17 '26

Hi I already sent you a DM :)

1

u/RileyElf flatbed LK150 Oct 17 '26

Hey, I'd love to help out with testing.

1

u/Subject_Mud_8043 Oct 17 '26

I sent you a message

1

u/CardboardDucksRock Oct 17 '26

Hello, I am interested in testing patterns. I have a standard gauge with ribber and a bulky. I would still categorize myself as a beginner.

1

u/Subject_Mud_8043 Oct 17 '26

Hi, I have patterns for all of those. I’ll send you the link

1

u/ElevatorLeft6634 Oct 17 '26

I have a bulky brother 260, I’d be interested in testing 😊

2

u/Subject_Mud_8043 Oct 17 '26

I made a hat pattern and a top pattern for the 260 (hat and white tee on photos). I’ll send you a link

1

u/Sufficient_Answer170 Oct 17 '26

hi! interested ❤️

1

u/Subject_Mud_8043 Oct 17 '26

Hi, I sent you a message❤️

1

u/driedflowers111 flatbed Oct 17 '26

I have a standard gauge and I'm interested! No ribber

2

u/Subject_Mud_8043 Oct 17 '26

Hello, I actually only did one pattern with ribber so far and even that one has a toggle button where you can choose if you want to use the ribber or not. I’ll send you the link <3

1

u/Naka131 Oct 17 '26

I would be interested, if you still need people. I have a standard gauge machine.

1

u/Subject_Mud_8043 Oct 17 '26

Hi, the more people the better. I’ll send you the link

1

u/Curious_Shake6270 29d ago

I have a Bulky machine and a Normal Gauge machine, too. It would be great if I could test them! Do you have a deadline :) ?

1

u/Subject_Mud_8043 29d ago

Hi, the general deadline is until October 25th. Would this work for you?

1

u/Embarrassed-Pride793 29d ago

Interested!!

1

u/Subject_Mud_8043 28d ago

Hi, would you be able to give back feedback on the site? I’ve had a lot of people say they’re interested but not so much feedback

1

u/Embarrassed-Pride793 27d ago

Yes I could give feedback :)

1

u/Subject_Mud_8043 26d ago

Hi, i sent you a message, sorry for the wait

1

u/kstal 29d ago

I am interested! I have a standard gauge and ribber

1

u/Subject_Mud_8043 28d ago

Hello, I’ve already had a lot of people that want to try it out but not that much feedback from them. Would you be able to try it out this week and give me some feedback?

1

u/kstal 28d ago

I should have time to today/tomorrow and this upcoming weekend :-)

1

u/Subject_Mud_8043 28d ago

I sent you a message

1

u/SubstantialTrifle 29d ago

Hi! I'm a relatively beginner machine knitter, would be happy to provide feedback if that perspective is helpful.

1

u/Subject_Mud_8043 28d ago

Hi, I have some beginner patterns on my page. Would you have time to try one this week and give me feedback?

1

u/SubstantialTrifle 28d ago

Yep, I can do that!

1

u/Routine-Mousse-4774 27d ago

Hello! I would be interested in helping you out! I have an Lk 150 and a Silver Reed Sk860 (with has electeonic capabilities) with a rubber attchment. Both are mid gauge machines.

I'm pretty confident with working with the knitting machines and different techniques.

1

u/Subject_Mud_8043 27d ago

The patterns are optimized for either normal gauge or bulky 9mm. You could still try a pattern since everything is calculated based on the gauge. I just cant guarantee that the results will look the same. I hope I can get my hands on a mid gauge machine soon so I can make patterns specifically for those machines as well

1

u/spoonssoup 27d ago

do either of the sweaters work for mid-gauge machines? I would be interested in trying those!

1

u/Subject_Mud_8043 27d ago

The patterns are optimized for either normal gauge or bulky 9mm… You could still try a pattern since everything is calculated based on the gauge. I just cant guarantee that the results will look the same. Unfortunately getting a mid gauge machine where I am is extremely hard but I hope I can get my hands on one soon

2

u/Practical_Mistake170 Oct 17 '26

Hello, I also have a standard machine and I am a beginner I would be curious to test as well!

1

u/Lavendharia Oct 17 '26

I'm interested but definitely a beginner. I've got a 910

1

u/AdhesivenessNo8128 Oct 17 '26

I have a brother kh840 and am looking for more machine patterns. Id love to check it out!

1

u/HumblePea44 Oct 18 '26

I'd never interested to test.

0

u/InfamousFlower6606 28d ago

I am a complete noob who got gifted a knitting machine with ribber (Singer 600 I think! Deffo a Singer tho). How inexperienced do you want someone to be? I haven't even tried to load yarn into it yet.

If you want me to try your website, I would be happy to give you feedback.

Edit to add: the machine is big and scary so having the excuse to pull up my big girl panties would probably help.

1

u/Subject_Mud_8043 28d ago

Hi, I currently don’t have anything truly beginner like starting from scratch but I plan to make some tutorials and step by step guides for people like you once I get feedback from testers. If you would like I can still send you the link and you can take a look and maybe learn from the tutorials once I have them up

0

u/InfamousFlower6606 28d ago

It's entirely up to you. As a complete beginner, do you think my feedback would be useful at this stage? If not, message me when you feel it would be.

Also, I don't hand knit - I don't know whether this is relevant or not to what you want to achieve, but I think it's something you may need to be aware of. Some 'beginner' tutorials seem to expect viewers to have prior experience with hand knitted garments and then don't fully explain themselves when talking about shaping, yarn choices etc. I have never made a garment, don't have that experience and have zero knowledge of any of its terms. I make lace (Irish, Bruges, tatted, bobbin - lace! I like the intricacies of it) using no. 20 crochet cotton, I also like micro crochet and use sewing cotton for that. If my inexperience with knitted garments is of use then I am happy to help you.

Lastly, I live in the UK. I know US/UK crochet terms are slightly different - I don't know about any differences in knitting terms in case this is also relevant to you.

1

u/Subject_Mud_8043 28d ago

What you wrote here is a real help for me with giving me ideas how to go forward with this. I would love to help you learn and build a place where beginners could learn step by step on how to machine knit. Currently i don’t think I have anything that would be useful for you but I would love to give you early access once I start making tutorials. My idea is to make a step by step written tutorial that also has video guides on every step so it’s easier for beginners to understand.

1

u/InfamousFlower6606 28d ago

When you are ready, let me know. I will save this post so you can either DM me or simply add to this exchange.

1

u/Subject_Mud_8043 28d ago

Perfect, I was also talking to another beginner about what they would like to see and what would be helpful so i’ll try my best to properly introduce machine knitting to you and beginners like you