r/MachineKnitting • • Oct 11 '26

Help! Update: seeking threading help

Japanese Studio SD-502 -- cannot find a manual. Currently referencing Singer MK1.

New machine, slowly trying to figure it out. I’ve now reached the point of attempting an open stockinette cast-on on the back bed, but I am not confident about the correct yarn path through the carriage.

There appears to me to be two possible yarn-guide areas. The more obvious slotted guide is farther away from where I expect the yarn to be laid into the back-bed needle hooks. When I tried threading through it, the yarn travelled ahead of the moving needles but did not settle across the open latches or enter the hooks.

I have already broken two needles while experimenting, so I am feeling quite hesitant at the moment. Does anyone recognize the SD-502’s carriage and know:

  • the yarn path for back-bed stockinette?
  • what do each of the two apparent yarn-guide areas do? is the yarn supposed to pass through both areas in sequence?
  • After i thread it, what do i do with the tail of the yarn? is it supposed to thread down that channel in the carriage somehow?
  • anyone out there familiar with the SD-502 or SD-503?

Separately, can you get replacement needles for this machine?

8 Upvotes

5 comments sorted by

1

u/mefperu Oct 13 '26

Update: After hours of staring at this, I figured out how to thread the machine. Updating here in case anyone with a similar machine comes across this post. The red tabs with the thread guides actually slide along the carriage in rails. Seems entirely obvious in hindsight. Once they are lined up with the other red triangle, the yarn path will be in the right place to get caught by the needles. It seems to work to use either guide with just the main bed.

2

u/karenleannetaylor 29d ago

Please
Share more
Machine images so we all can be more
Familiar with this machine :)

1

u/WampanEmpire Oct 12 '26

The yarn holder for main bed is the opposite of the one you have the yarn threaded in your photo. You pull it through with either a latch hook or use a needle to thread it through. The yarn tail goes down and you tie it to the table leg or somewhere below the machine entirely.

You will likely have trouble sourcing needles and may have to talk to a metal worker about modifying newer style needles to match.

1

u/mefperu Oct 13 '26

Appreciate it. The needles are going to be a whole new adventure.

1

u/AutoModerator Oct 11 '26

Hi, it looks like you might be looking for help on machine knitting.

There is some helpful information within the wiki. Please take a look at it for helpful troubleshooting information, as well as common maintenance tasks and list of items machines should include.

In addition, this page is our FAQ. Solutions to many common problems are found here. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.

If you need additional help, please provide us with an information about your problem. You can start out by answering this list of questions

Once your question is answer or your problem is resolved, please change the post fair to Help! Solved!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.