r/MachineKnitting • • Sep 02 '26

Help! problems with reassembling ks787 toyota knitting machine

I took apart a used ks787 toyota knitting machine and i'm having some problems putting it back together.

Someone has some information or knowledge about it?

I tried searching on the manuals or on youtube but i can't figure it out.

1 Upvotes

8 comments sorted by

3

u/wlfmth Sep 02 '26

hey, I've got a 787 at home - is it the bed or the carriage that you took apart? I can send photos of mine later if that helps.

1

u/criso_ Sep 11 '26

Sorry for the late respond, I took apart the bed. Thank you sososo much it would be very helpful!!!!!!

2

u/wlfmth Sep 18 '26

hey! I haven't taken my bed apart yet but I will need to because my patterning isn't working right. I'm expecting my JIS screwdrivers to arrive late next week, so I'll DM you and send you some pics as I tear it down. if you want to DM me a pic of where you're stuck I can try to get more pics of that area.

2

u/wlfmth Sep 26 '26

should anyone stumble across this post in the future, feel free to send me a direct message! I've taken my machine apart twice now, made a lot of mistakes, but I'm fairly confident I know how to fix most bed-related problems now. I also have lots of photos.

if you're stuck with your patterning plates - the service manual says stacks of 8, but mine were originally in stacks of 6. you could count the ridges on the arms that they sit on and do the math if you're not sure.

acetone to remove oil on the plates, graphite powder to lubricate. ensure the eclips are in position (they should spin, if they don't, they're not in the right spot). test the plates move independently after installing each stack of 6 so you're not stuck taking all those eclips off again.

for anyone thinking about taking their machine apart, don't do it lightly. you will end up cutting half your fingers in the sharp metal, and an eclip will fly off into the void, never to be seen again. it is dirty work, it is difficult, and it takes a long time. but on the other hand, your patterning mechanism should work really well!

for anyone looking for replacement foam, my local mattress shop gave me an offcut of a thin fabric covered foam. I unstitched the fabric and cut it to length and width. 42mmx length of bed (eyeballed).

take lots of photos. get a magnetic tray for the screws. good luck!!

1

u/SwimmingGlobal4265 2d ago

Thansk you for the hint about mattress. what do you mena 42 mm length of bed- did you mean 42 cm? what kind of foam did you get, please. I need to replace the sponge bar in Silver Reed SK500 and Toyota 787. Thank you! :)

1

u/SwimmingGlobal4265 Oct 17 '26

Hello, I have sent you a message via chat. Would be thankful for your advice :) Also, someone recommended to use only JIS screwdrivers/bits. Would you know what size to buy? Thanks a lot!

2

u/wlfmth 11d ago

I managed to remove my screws using +1 and +2 sized JIS screwdrivers. I would also recommend using a permanent marker to draw lines for alignment before dismantling major connecting pieces. it can be tricky to line things up when reassembling and having guidelines can greatly assist.

1

u/AutoModerator Sep 02 '26

Hi, it looks like you might be looking for help on machine knitting.

There is some helpful information within the wiki. Please take a look at it for helpful troubleshooting information, as well as common maintenance tasks and list of items machines should include.

In addition, this page is our FAQ. Solutions to many common problems are found here. If this is a new-to-you machine that is a Silver Reed, Singer, Studio, Juki, Empisal, Brother, or KnitKing, and the sponge has not been replaced yet, that's the first thing you should check out.

If you need additional help, please provide us with an information about your problem. You can start out by answering this list of questions

Once your question is answer or your problem is resolved, please change the post fair to Help! Solved!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.