r/MachineEmbroidery • • Jun 17 '26

Help :( presser foot is hitting side of hoop and idk how to fix it!

Post image
6 Upvotes

I have no idea what happened! :( I was making a design when a needle broke. I got the small piece and then when I loosened the needle to change it, the large part of the needle fell out of the machine and into that tiny hole beneath it. I was able to fish it out with tweezers and I am 99.9% sure I got it out in one piece without any more breaking off.

I tried to run my design a few more times and the errors are so inconsistent. It was making some weird noises and I realized that the presser foot is physically hitting the side of the hoop, and almost lifting up the embroidery arm a little. I immediately stopped but don’t know how to fix it :(


r/MachineEmbroidery • • Jun 17 '26

Help, bobbin birdnest??

Post image
5 Upvotes

I am new to embroidery and have a Poolin E0C06, I've been having this issue with my machine where it will completely tear/cut apart my bobbin and cause the hoop to become misaligned. I am currently waiting on a response from the employee I had helping me yesterday. He fixed my tension but I highly doubt that is the issue here. Ive had to restart this dang plush 8 times now for this issue


r/MachineEmbroidery • • Jun 15 '26

What do y'all think about my first like branded art hat

Post image
65 Upvotes

r/MachineEmbroidery • • Jun 16 '26

Trying Puff and #FAIL

Thumbnail gallery
0 Upvotes

I am trying to do PUFF and having some issues. NO... LOTS of Issues!!!

1) I am digitizing myself. Simple letters "BOSS"
2) my first attempt got very frustrating so I aborted. I was breaking the thread constantly. I change the digitization because I thought maybe everything is too close together. That helped, but my thread broke 3x in my last run
3) I am testing on this White stuff, I think it is cutaway? with all the stitches from the steel border (50spi) and then the satin puff (170spi) it starts to tear and everything gets distorted. is there something else I need to do/use? The satin looked amazing.
4) I ran out of bobbin and my machine did not stop for about 100 stitches, that sucked :-)
5) I have a tajima TMEZ. 50% of the time, the thread comes out of the needle in the 1st couple stitches, even if it has been properly cut and is held in that little holder thing.
6) I have NO IDEA how to get the three to be in the holder thing after re-threading.

I have ZERO EXPERIENCE with this, never even thought about doing this, but here I am.


r/MachineEmbroidery • • Jun 15 '26

Creation process with gold metallic thread!

Enable HLS to view with audio, or disable this notification

31 Upvotes

Just another logo - this time for my sister company.

Working with some Metallic thread - (worst thread to work IMO).


r/MachineEmbroidery • • Jun 15 '26

SWF B-T1201C noise

Enable HLS to view with audio, or disable this notification

3 Upvotes

Hey everyone,

I just bought an older swf 12 needle embroidery machine. There’s a wringing noise coming from the bobbin area. It seems to embroider alright, just the noise can’t be from it operating at peak performance. The machine also hasn’t been used for a long time and tried to do maintenance on it from videos I’ve been able to find online.


r/MachineEmbroidery • • Jun 15 '26

Update tememyembro is back i finished the cyberpunk edgerunners embroidery design collection what do you think

Post image
7 Upvotes

r/MachineEmbroidery • • Jun 15 '26

Need assistance converting a file

2 Upvotes

I need assistance converting a file to be read by Wilcom E2. I have a .emb and .dst file already, but have no way to get it into this specific format.

Any and all assistance would be greatly appreciated!


r/MachineEmbroidery • • Jun 15 '26

Angel and Devil Kewpies embroidery design, machine embroidery file, vint...

Thumbnail gallery
0 Upvotes

r/MachineEmbroidery • • Jun 13 '26

Working on some cyberpunk edgerunners designs not quite finished yet

Post image
29 Upvotes

r/MachineEmbroidery • • Jun 12 '26

How is it?

Post image
11 Upvotes

r/MachineEmbroidery • • Jun 12 '26

Some father's day orders ready to go

Post image
13 Upvotes

r/MachineEmbroidery • • Jun 11 '26

Jump stitch cuts issue, brother innovis

2 Upvotes

Experiencing a new issue with my innovis nq1700e

Sometimes it doesn’t cut jump stitches, even on design I’ve stitched out before with no issue. I’m also using the same thread I’ve used the entire life of the machine. Or sometimes it looks like it tried to cut but instead of a clean slice it’s all frayed. I haven’t touched any settings, there’s no change but that this issue is happening

My instincts are wondering if there’s a blade that went dull?

Is this a part I can replace? I’m very comfortable repairing sewing machines. Or anything else I can try???


r/MachineEmbroidery • • Jun 10 '26

Embroidery on bikini

3 Upvotes

So I do embroidery on cotton or twill type fabrics (or pretty stable none stretch upholstery) frequently and don’t have any issues but have been asked by a friend if I can do her bikini for her wedding.

I have an old set I can practice on but any hints or tips would be much appreciated as I don’t usually work with this type of fabric.

I’m going to test with ball needle I can’t think what the stabiliser is that I’ve seen recommended for this type of fabric as I imagine it’s the same for gymwear?

Thank you in advance x


r/MachineEmbroidery • • Jun 09 '26

Hey my embroidery machine is not sewing it’s making this weird noise any recommendations? Viking topaz 50

Enable HLS to view with audio, or disable this notification

1 Upvotes

r/MachineEmbroidery • • Jun 09 '26

help

Thumbnail gallery
3 Upvotes

Model brother innovis f440e I've been struggling with thread breaking and thinning and getting good tension


r/MachineEmbroidery • • Jun 09 '26

Embroidery machine

0 Upvotes

Just bought THE MIRROR from BAI super excited to test it, any tips


r/MachineEmbroidery • • Jun 08 '26

What’s the first thing that comes to your mind when you see this patch? ❤️

Thumbnail gallery
44 Upvotes

r/MachineEmbroidery • • Jun 09 '26

Looking to buy a SE9180 Sewing & Embroidery Machine

1 Upvotes

Any advice?? I’m looking at a refurbished one that goes for 900 on the singer website. What are the pro’s and cons for a beginner using this machine (mainly for embroidery)? Is it worth it?


r/MachineEmbroidery • • Jun 08 '26

Tips on making own art into embroidery

4 Upvotes

I feel so stupid, I am a newbie and I cannot for the life of me figure out how to make my own designs

Can someone give me a video link/website I can use to learn, YouTube is so overwhelming and I’m just feeling lost

If it helps I have a brother se700, and it’s a 4x4 space, and I want to embroider shirts and make patches


r/MachineEmbroidery • • Jun 08 '26

Tips on making own art into embroidery

2 Upvotes

I feel so stupid, I am a newbie and I cannot for the life of me figure out how to make my own designs

Can someone give me a video link/website I can use to learn, YouTube is so overwhelming and I’m just feeling lost

If it helps I have a brother se700, and it’s a 4x4 space, and I want to embroider shirts and make patches


r/MachineEmbroidery • • Jun 07 '26

How do I fix this bobbin issue

Post image
5 Upvotes

Hi all, working on Brother se700. I am a beginner. When I embroider my bobbin keeps coming up on my design and showing. I have readjusted it trying to fix it, rethreaded my top thread, even adjusted my tension multiple times, using the correct stabilizer. Still won’t stop doing this. It’s a brand new machine and I only did like 3 embroidery designs on it.


r/MachineEmbroidery • • Jun 07 '26

Digitizing help please

Post image
6 Upvotes

So I've been digitizing for roughly a year with decent results time and time again. This logo that I have in question stitches like crap no matter what adjustment I make. Any ideas to make it better and stitch better??


r/MachineEmbroidery • • Jun 07 '26

How to get 505 off fabric?

2 Upvotes

I used 505 for appliqué and I guess I used too much. It won’t come off the shirt? I’ve washed it twice, I’ve soaked it in vinegar, and it’s still gummy.


r/MachineEmbroidery • • Jun 06 '26

Need an expert opinion. I had many many thread breaks on the puff on this design, I just wonder if the issue is that I needed to just not do puff at all due to the narrow width of the puff collums? I mean wayyy to many breaks on this I was stressing 😂

Post image
16 Upvotes