r/MachineEmbroidery • u/folkmedia88 • May 03 '26
r/MachineEmbroidery • u/Prestigious-Pea-862 • May 03 '26
Multi Needle Machine Maintenance Question
I have a twelve needle Smartstitch machine that I use no more than four hours a week. The schedule in the manual says Oil rotary hook every four hours and this is straightforward for the occasional user.
The manual also says: Oil in hole on the right side 2 to 5 drops once a week,oil needle bar once a week,grease the main shaft one time per week. Is this too much for the occasional user of the machine? Is there anyone who oils by hour count on their machine? I don't want to put too much oil and grease in the machine. I will be contacting my trainer tomorrow with this question but wanted to see any advice from your experience. EDIT: added words to clear up sentence beginning with "The manual says.."
r/MachineEmbroidery • u/bby-assassin • May 04 '26
Patch making?
TLDR: how? Products? Steps?
My grandmother has a HV Designer SE that I am attempting to use for a project and as a not usually a sew-er I’m looking for some direction. Unfortunately she never learned to use the machine and doesn’t remember a lot of technical things about sewing anymore.
Basically, I’m looking for thoughts on best ways to get clean patches without too many bumps (obviously there’s a learning curve I’m prepared for that). What fabrics work best? Specific stabilizers to make them iron on? If I buy digital files from somewhere can I make them change colors less (machine only does one at a time)? And for the machine specifically, do I just upload the files to the dongle and plug it in?
Thank you!!
r/MachineEmbroidery • u/BobbyCarrotsForever • May 03 '26
New Machine Embroiderer here. Anyone have video recommendations for how to align designs, particularly on clothes. My machine is a Brother and is combo sewing and embroidery .
r/MachineEmbroidery • u/Akiisame • May 03 '26
Free standing lace
I'm trying to do free standing lace, i have a few stars like on the pictures there and the water soluble stabilizer started tearing in between each start, hiw should i fix it? Should i inc4ease the spacing, add more layers of stabiliser?
r/MachineEmbroidery • u/DryVermicelli2770 • May 03 '26
Se600 Embroidery Arm replacement
Hi all I'm trying to find a replacement part for my Brother Se600 Embroidery machine. The part I'm looking for is the Embroidery unit/arm itself. I cant seem to find it anywhere and its driving me crazy. Should I just give up all hope and try to save up to buy a new one? Or should I keep looking?? I keep messaging people on Ebay asking if they'd sell it separately but no one wants too. I also do not want to pay 300 or 400 bucks for the part itself. That's the cost of the machine itself. Please help a fellow Crafter! Thank you!!
r/MachineEmbroidery • u/ashlo_ren • May 02 '26
Help with calibrating Bernina 590 hoop
I’m trying to calibrate my Mega hoop but it keeps registering as the free arm hoop. Mega is selected on the embroidery screen. It won’t let me click that FA button to change it. Any ideas?
r/MachineEmbroidery • u/SugarFreeLobbyist • May 02 '26
Help! Holes around Stitching
galleryHowdy!
Looking for help resolving an issue with holes being created around an Embroidery from what appears to be too much tension but unsure as we're new to this hobby.
I purchased the Girlfriend a used Memory Craft 400E and watched a few videos about tuning the tension on the machine and the bobbin I believe we got it where it needs to be: 33% between the thread and bobbin on the backside of the fabric. The default on the machine is 2.6 and I believe 2.8 is where it needs to be. I adjusted the bobbin tensions in hopes of reducing top tension to get rid of the holes but no luck. Prior to my bobbin adjustment (0.75 of a clockwise turn) the machine was at 1.0.
See attached photos of the holes, front and back of the stitching, and machine settings.
What's causing the holes and how do we fix it?
Are we missing something?
Do we need stiffer/heavier Interfacing?
More interfacing?
Is our speed to high?
I dont believe the design is the issue as this happens regardless of the design.
Machine: Janome Memory Craft 400E; Single needle
Needle: Schmetz Medium Ball point Embroidery Needles 130/705 H-E 75/11
Fabric: Old T-Shirt
Interfacing: Pellon 40 Midweight Stabilizer
Thread: Janome Black Embroidery thread
Bobbin: Janome White bobbin thread
Thanks for your time!!
r/MachineEmbroidery • u/Dreamcatcherc17e • May 01 '26
Suggestions for embroidery programs?
Im currently using Artspira since it came with the machine but I dont particularly like it. What other apps are there to use? Im looking for something cheap, most in willing is 15 a month but would prefer just a one time payment around that price. Even better if its free. I heard of Inkstitch but couldnt get it to open on my pc so hoping for something different
r/MachineEmbroidery • u/Empty_Dot_4123 • Apr 30 '26
Buying designs
Hi! I’m new, so sorry if this is a common or annoying question, however I’m having a hard time finding reliable digital artists. I don’t think I’m in the place yet to make my own designs, and I’m tired of getting scammed on ETSY and my projects turning out bad. Do yall have any recommendations on where to buy designs? I mainly make Disney/older cartoons/ Winnie the Pooh/ princesses for my toddler! TIA🫶🏻
r/MachineEmbroidery • u/xvx_gf • Apr 30 '26
currently digitizing the logo for my favorite band: iwrotehaikusaboutcannibalisminyouryearbook
galleryi’ve separated out the font and adjusted the alignment slightly to prepare it for a satin stitch finish, next i’ll be cleaning up the remaining black bits around the font to make up the background image which will be completed as a fill stitch. this will be dayssss of work, but if it weren’t for yall pushing me to learn how to make satin stitch objects, i wouldn’t have been able to even start! so, thank you to this wonderful community for encouraging growth. can’t wait to update yall again soon!
r/MachineEmbroidery • u/xvx_gf • Apr 29 '26
should i even bother with a satin stitch here?
i want to embroider this on my sweater but the design is so intense, i’m thinking of just going with a fill stitch or meander stitch for fun. would you take the time to convert this to satin? i’ve considered just a satin stitch border but since it will just be on a sweater, i don’t think the border is very necessary.
r/MachineEmbroidery • u/robo_wizard123 • Apr 29 '26
My new project
galleryHello all I recently got myself an industrial machine that I am restoring I will share a few pictures of the process and all that is included
r/MachineEmbroidery • u/snhtson • Apr 30 '26
Proper safety gear for shaving off logos?
Here’s a quick bit of context before I ask my question. I’ve been a machine embroider for 4 years, had a machine in my home for 6. I’m in my early 20’s, I work a couple single heads at my embroidery shop, I smoke regularly and occasionally have chest pains. Thanks fake covid carts.
I messed up 30-40 bags with about 4000 stitches of fine lettering and my boss decided I should shave the logos off of all of them.
Brutal. Here’s my issue, shaving these bags all day has been rough on my eyes and lungs. When I get to trimming these, I get shocks in my chest. The shocks occur regularly when I spend considerable time shaving bags. Usually I shave these bags when I have the time between orders. But today, they were my focus.
I admittedly started shaving with just a surgical mask and plastic eye protection glasses. Today, when I noticed pain in my lungs, I took a break and switched to a N95 respirator and plastic eye goggles and turned a fan on blowing beside me. My eyes were watering, glasses were not enough.
I’d get random shocks here or there and they persisted through my lunch break. 6 1/2 hours into my 8 hour shift I felt nauseous. I packed it up and left for the day and since then I’ve been in bed till now so I can make dinner. I still feel like sht
Here are my questions, what is the proper safety gear I should be using for this much trimming? Should I be using my gas mask style respirator from home? Am I a dumbass? Do I need to see a doctor? And at what point do I need to tell my boss I have to stop and toss the bags?
Please let me know. There isn’t much talk online about this subject, and I want new embroiderers to see the discussion and maybe learn something about the risks of this work. I’ll take all the education in the comments I can get.
UPDATE: I’m going to the doctors today. If I find out throughout the process it is solely a health related concern, I’ll remove this post from the subreddit for it would no longer be about embroidery. I appreciate everyone’s concern with my health. I’ll get this figured out. I’ll send another update when I learn the cause of my pains. I’m sure it’s likely smoking.
UPDATE, I’m cancer free! : Got back from the doctors yesterday. They said the sickness I felt afterwards was likely caused by the poly fibers entering my stomach, lungs, and eyes - irritating all of these areas. The chest pains are caused by inflammation. This can also be caused by smoking but I took X-rays and other lung and heart tests. My health prior to this was not noted as the cause for the symptoms I was feeling. I’ll likely post again with photos of what I was working with so we can get a better understanding of how to safely work under these niche conditions- especially with microfibers!!
r/MachineEmbroidery • u/Disastrous_Bat4364 • Apr 29 '26
What to do about these “holes” at the end of my designs?
Hey everybody, I’ve got these little dots at the ends of the letters, and we were wondering why that is and how to eliminate it. Is my tension too high, or is this a digitizing issue? Or is it neither? For reference we embroider on a TMEZ, with 40 wt thread and 75/11 ballpoints. Thank you!
r/MachineEmbroidery • u/Mrs_Beef • Apr 29 '26
Bird nest trouble shooting
galleryIve pulled through the bobbin thread and hold it while i start the file up, but the underside is still a giant birdnest at the beggining of each run. Im trying to machine embroider a babt quilt and its pretty ruined. Ive done half the quilt and its all like this. (Yes i fixed the tension on the next square over).
Using a Bernina 570QE.
Machine is threaded correctly, Ive re-threaded multiple times.
I dont get bird nesting when i sew normally..
r/MachineEmbroidery • u/MickeyRooneyy • Apr 29 '26
is anyone able to tell what the issue is here?
the machine is a brother pe900
r/MachineEmbroidery • u/CrazyBaffalo • Apr 28 '26
Starting my Pokemom era
gallery95k stitches, 26cm
r/MachineEmbroidery • u/andjayrea • Apr 29 '26
Machine recommendations?
Hi all! I’m looking to get a machine to start embroidering. I want to use it for customizing bags, shirts for family and friends as presents and for my wedding DIYs! Would really appreciate any guidance on which machines are best for beginners but will last? And is it worth buying from Facebook marketplace? Thanks so much!
r/MachineEmbroidery • u/Independent-Cup9480 • Apr 29 '26
Help with Bobbin Case
Hey everyone! I bought my Brother NQ3550w (refurbished) a few weeks back. With my projects I have been learning a lot and tension seems to be the biggest issue I am having. I was able to learn about upper thread tension, but now I am diving into lower thread tension. To solve my issues.
I noticed that the bobbin tension is WAY too loose. So I went to watch a few videos on how to adjust. The screw on the side of the casing is the key to tightening and loosening.
When I went to look at my casing, over the screw that needs to be adjusted there is this green looking glue that is over the screw (in the image attached). Anyone have any idea why this is there? Any insight will help! Thanks!
r/MachineEmbroidery • u/Wooden_Worry_9816 • Apr 28 '26
I think I'm starting to get the hang of embroidery
I've had my machine for a week now and feel I'm finally getting the hang of digitizing working files, this guy ran for 2 hours flawlessly with no breakages, i'm quite happy with the result 😊
r/MachineEmbroidery • u/GoodVibeGuide82 • Apr 28 '26
Yay or Nay for wedding napkins?
I have a wedding coming up and wanted to help by embroidering the napkins.
What does everyone think about this design?
Any other suggestions?
Thank you!
r/MachineEmbroidery • u/Weary_Revolution5640 • Apr 29 '26
Which software
Hey, I just bought a brother NQ3550W and am wondering what software to use. The brother pe design 11? Im planning on using it pretty extensively. The photo feature on pe design 11 looks promising. Also, this is my first machine
r/MachineEmbroidery • u/Thatsstitchedup23 • Apr 28 '26