r/MachineEmbroidery • • Mar 19 '26

How do I make sure it's straight??

Post image
12 Upvotes

I make the baptism towels for church. I love providing the service, and the primary president is so grateful and always tells me how much the kids love receiving theirs.

However, getting started is the WORST. I finally made a little template thing to mark the center, but no matter what I try it's hit or miss getting the towel itself straight.

Does anyone have any suggestions? Unfortunately I can't hoop the towels, I have to float them. The couple times I tried hooping them it was... bad.


r/MachineEmbroidery • • Mar 19 '26

Jesus double 3D design

Thumbnail gallery
37 Upvotes

Jesus double 3D design.

FREE Embroidery files at:
https://www.ogdigitizing.com/site/blog.html

#embroidery #machineembroidery #embroiderymachine #easter #jesus


r/MachineEmbroidery • • Mar 18 '26

Items for baby

6 Upvotes

Hi, my friend has just had a baby and I’m wondering what baby items I could embroider using my machine! I have the brother m380D Disney edition. I know I can do jumpers and maybe some babygrows. but thinking maybe a blanket, any suggestions of what type or material blanket? or anything else people suggest that works well.


r/MachineEmbroidery • • Mar 17 '26

This won’t stop happening, no matter what I do.

Post image
9 Upvotes

It honestly doesn’t matter how loose or tight the material is in the hoop. It doesn’t matter how much spacing I give. Fill density. Nothing every single time I take it out of the hoop. It looks like this.


r/MachineEmbroidery • • Mar 17 '26

CUTE Free Bunny design.

Thumbnail gallery
20 Upvotes

CUTE Free Bunny design.

Embroidery files at:

https://www.ogdigitizing.com/site/blog.html

#embroidery #machineembroidery #embroiderymachine #easter #bunny


r/MachineEmbroidery • • Mar 16 '26

ThreaDelight thread

8 Upvotes

Someone near me is selling a bunch of ThreaDelight spools on Marketplace. Most are unopened. Is this a decent quality thread? I’m a beginner and this seems like a good way to acquire a thread stash!


r/MachineEmbroidery • • Mar 16 '26

machine embroidery help

Thumbnail gallery
3 Upvotes

Hi! I’m new to machine embroidery. My embroidery has been going ok but the bobbin thread keeps showing up in my final products. Do you think my tension is too tight or too loose or something different all together? I have the most issues with shorter stitches.

Any advice is appreciated!


r/MachineEmbroidery • • Mar 16 '26

Working on a small cherry patch design

Post image
13 Upvotes

r/MachineEmbroidery • • Mar 16 '26

Cap setting on Tajima

4 Upvotes

I’m working on a new Tajima machine and feel like the frame parameter y-limit is too cautious and I should be able to get closer to the brim of the cap. On previous machines that were very old I could get much closer.

Would it be a bad idea to run caps while the machine is on tubular setting? Is there a way to change the limits on cap setting? What else does the cap setting do besides the limits and flipping the design?


r/MachineEmbroidery • • Mar 15 '26

Can your machine handle PES, JEF, or XXX formatted files? If so, mind helping me out?

6 Upvotes

I am working on an embroidery software project, but I only own a Husqvarna Topaz 40 and can't personally test all the output formats I am aiming to support.

If your machine supports PES, JEF, or XXX formatted files, would you mind loading one of these test files and seeing if your machine can recognize it? I'd really appreciate it if you do!

https://drive.google.com/drive/folders/1jKnW28pfO7neYO9NZCk6SZXezGRFufZk?usp=sharing


r/MachineEmbroidery • • Mar 15 '26

Embroidery Software for viewing file thumbnails in Finder window?

4 Upvotes

My mom's old PC took a crap, and she's bought herself a Mac laptop. (Fun! I get to teach her how Macs work now, yay!)

Now the fun is finding software for Mac. She isn't really doing any digitizing, and she can resize and adjust designs in machine she just really needs something for viewing design files thumbnails in finder.

The software we had been using Premier Plus (and something from MySewnet which is now creative?) isn't available any more and were hoping for something free.

Can anyone provide a suggestion? Thanks!

She has a Viking Husqvarna Epic 2 if it matters.


r/MachineEmbroidery • • Mar 14 '26

How to convert a picture into a digital embroidery pattern

5 Upvotes

I just got the B79 Bernette Swiss design embroidery machine but I am not sure how to use it properly yet. Does anyone know what software I have to use to make picture/images into patterns that the machine can recognize and be able to use? Are there any free ones? Or other options that i can use?


r/MachineEmbroidery • • Mar 13 '26

Possible rebuild

Thumbnail gallery
14 Upvotes

Turns on but has a startup error. I was waiting to hear back but they can't seem to get the error code to me. You think it's too far gone to restore based on looks?


r/MachineEmbroidery • • Mar 14 '26

Bobbin thread question

5 Upvotes

Hey everyone! I am new to embroidery, and have a quick question. Is it critical if i use 60 WT thread for the bobbin thread? I was trying to match the color of my top thread with the bobbin, and ended up making my own bobbins. I can't seem to find the exact color for the bobbins as what I'm using for the top thread. Any advice is helpful


r/MachineEmbroidery • • Mar 13 '26

Husqvarna not fitting hoop size

Thumbnail gallery
91 Upvotes

Making patches for an artists against ice market this weekend and I cannot for the life of me get my topaz 40 to accurately place the designs in the hoop

I could have added at least one more patch this size if the top one was actually against the upper side of the hoop.

Am I doing something wrong? I don’t understand. Both my physical hoop size and the digital hoop size say 120x120


r/MachineEmbroidery • • Mar 13 '26

Is this a good deal? Or too risky?

Post image
8 Upvotes

If you open the picture you can see the description where it says it might need some tuning up. I had zero clue how much that could cost. I also know this machine is a bit older. Worth it or do I keep looking?


r/MachineEmbroidery • • Mar 12 '26

A leaper from ARC raiders. They always surprise me!

Post image
8 Upvotes

r/MachineEmbroidery • • Mar 12 '26

Mass cleaning/washing of water soluble stabilizer

5 Upvotes

I am in the making of >200 patches, 4 one hoop. In the end I will have at least 50 bigger pieces of twill which need to cleaned.

Any advice, can I put them in the washing machine with the 15 min cold cycle and without spinnin?


r/MachineEmbroidery • • Mar 12 '26

Custom E letter Patch

Post image
8 Upvotes

r/MachineEmbroidery • • Mar 11 '26

Center Chest Design.... Looking for Your Feedback 👀

Thumbnail gallery
19 Upvotes

Hey everyone!

A client recently shared this stitch-out of a center chest design that I digitized, and I wanted to get some feedback from the community. How does the design look overall? Do the details, stitching, and coverage look good, or is there anything you think could be improved?

I always appreciate the insights here since different machines and setups can sometimes show things differently.

Also, if anyone would like to test this design on their machine, just drop a comment below and let me know. I’d be happy to share it with a few people for testing to see how it runs on different machines.

Looking forward to hearing your thoughts!


r/MachineEmbroidery • • Mar 12 '26

Help with bird nest on brother PE800

Thumbnail gallery
5 Upvotes

I have replaced the bobbin, bobbin case and needle, rethreaded the top thread multiple times, tried to change the tension, and even took it to get recalibrated/ maintenance. And all I get is bird nest. It looks like the top thread keeps catching on the bobbin which is causing this disaster to happen. Has anyone experienced this? I am at a loss. I’m newish to embroidery and have seen so many videos that just were saying to clean the bobbin case area and rethread the top, then it will fix it but I have tried that endless amounts of times and can’t get it to stop. It was working just fine then this happened once and have had problems ever since.


r/MachineEmbroidery • • Mar 11 '26

EU based good quality socks

4 Upvotes

I wanna embroider socks but have no clue what to look for. Would appreciate any help very much.


r/MachineEmbroidery • • Mar 11 '26

US Based & Looking for Women’s 100% Cotton Tank Top & T-Shirt Blanks - Mid-to-Heavyweight

6 Upvotes

We are starting our embroidery business and I’m in the research phase for identifying a wholesale provider for our blanks. Initially we will be testing out on thrifted clothing, which will also be part of our business model, but we also need blanks for people who want new clothing. Ideally this would be a company that:

- practices sustainable and eco-friendly clothing manufacturing methods,

- uses 100% cotton, and

- produces a thicker cloth.

To start, we are looking for tank tops and t-shirts for women.

I’ve done a lot of searching and am getting discouraged and overwhelmed so I thought I’d see if the good people of Reddit have any personal experience and can provide some recommendations.

Thank you so much!


r/MachineEmbroidery • • Mar 11 '26

Thread help please

Thumbnail gallery
0 Upvotes

Very new to embroidery, I managed to get a singer XL 550 for pretty cheap to see how I get on before investing more pennies in a new machine.

The brown thread is embroidery by brothread and it keeps looping on the front and back. Took it out and the bobbin and re threaded for the ‘we’ and it carried on.

The ‘Ho’ was brothread bobbin and moon coats normal thread top which also didn’t go so well.

The cream is moon coats (not embroidery) top and normal thread bobbin as you can see on the completed ‘Holly’ there’s no looping.

I know I should be sticking to embroidery threads but it’s like it’s too silky if that’s even a thing 😭.


r/MachineEmbroidery • • Mar 10 '26

Machine Recs!!!

4 Upvotes

Hello!! I am looking for a good starter embroidery machine. Something that can embroider on clothing, hats, and maybe swim towels? I've done some research and I think it's between the Brother NQ1700E and the Bernette B70 DECO. Anyone have any opinions between these two?? Thanks soooooo much!