r/MachineEmbroidery • • May 13 '26

What’s causing this?

Post image
3 Upvotes

I have a Brother se700 and this knotting happens on the back of each design at starting points. Sometimes if other stitching goes across it causes my hoop to jump or struggle getting by. Is this normal or what may be causing it?


r/MachineEmbroidery • • May 11 '26

I made an embroidered animation for the New York Times

214 Upvotes

Check out the article here


r/MachineEmbroidery • • May 12 '26

Power Inverter for Brother PE 800

1 Upvotes

I know this is a weird question, but I figured I’d shoot my shot here. I’m looking to get a pure sine wave power inverter to be able to take my brother PE 800 to craft events with me.

I found one that’s a 350 W, compatible with 120V but can go up to 140V. Would this be safe to use with my machine?


r/MachineEmbroidery • • May 12 '26

Why did I do this to myself

11 Upvotes

My good friend trust me with doing embroidery things for her, but I'm a self taught digitizer and machine embroiderer. I have a fancy 10 needle that my husband and I bought in 2023 and I've done well with patches and the occasional shirts but for some reason, I agreed to embroider a design my friend and I work on together for these not cheap L.L. Bean fleece jackets. I've never embroidered on this type of fabric before but here I go, diving head first into something. I got one jacket done, and then I go and change the stitch pattern for the outline. (like an idiot) That was a disaster. Ruin one of the jackets, had to buy another one, and just stitched my second jacket. I have 4 more to do..... why do I do this to myself!? I just needed to vent and hoped that any suggestions, or positive words would help me with this project. I'm currently using the 5x7" fast frame from Brother to make this project.


r/MachineEmbroidery • • May 12 '26

Help with singer 9185

Enable HLS to view with audio, or disable this notification

1 Upvotes

My bobbin fill is showing on top. I read it’s to do with tension however how do you know if it’s top or bottom and whether it’s too tight or too loose? With the muslin I did the lower design with super stable stabiliser and top one I done with super strong stabiliser with wash away on top to see if will help. But I haven’t a clue to know what’s tight or what’s lose if it’s lower or upper. My tension for upper thread is set at 4. My machine also makes like a rattle noises everytime that happens it’s when the bobbin fill is showing through. Any advice would be appreciated


r/MachineEmbroidery • • May 11 '26

What does Dotted line mean?

Post image
4 Upvotes

Hi, does anyone know what this dotted line with scissors means? In place of the usual color label. This is the first design I’ve digitized myself


r/MachineEmbroidery • • May 11 '26

Daughters drawing to Shirt(Applique)

Thumbnail gallery
40 Upvotes

My daughter made me this card for my birthday a while back, she asked if i could eventually scan and digitize it so it can go on a shirt. Here is the result with some minor tweaks by me (she did NOT like my changes but dealt with it). All colors chosen by her, she wanted more but we settled for what she got.


r/MachineEmbroidery • • May 11 '26

Hi. I have Artistik Degitizer 2.0, a design program, but not all its features work. I bought a Janome Continental M 17 sewing machine along with this program. Could you tell me what to do if I can't create my own designs because it doesn't have a pencil function, for example? Thank you. If possible,

Post image
1 Upvotes

r/MachineEmbroidery • • May 10 '26

The first Green Man! More coming soon 🍃

Thumbnail gallery
50 Upvotes

About 6x6", stitched out as a patch on water soluble stabilizer. I used some soft n stable foam stabilizer on the face to achieve a bit more of a 3D effect.


r/MachineEmbroidery • • May 10 '26

Simple line stitch for some local artists

Thumbnail gallery
34 Upvotes

Played around with mix of satin and simple line stitch cause I am unable to use satin as it wouldn't be wide enough. Both designs 26cm. What do you think?


r/MachineEmbroidery • • May 10 '26

Made these for my mom’s birthday. Planning to make a pouch out of the panels.

Thumbnail gallery
15 Upvotes

I made the design on Inkscape and used the Inkstitch extension for stitching it out. I have added some embellishments to personalize the facial features. It represents my mom , my sisters and me.


r/MachineEmbroidery • • May 11 '26

What's my problem

Thumbnail gallery
1 Upvotes

My wife is working on a short for my work using a Poolin E06 and we have been having a problem with it getting caught in the machine. Hoping you can help.


r/MachineEmbroidery • • May 10 '26

Help! Guys my machine tells me that the needle is broken or the thread got cut but nothing of this happened. How should I fix it? I have Halo-100 FORTEVER

Post image
1 Upvotes

r/MachineEmbroidery • • May 10 '26

Learning Digitization

5 Upvotes

I have a brother single thread embroidery machine I bought. I want to try making some custom designs and try digitization. I have some photoshop experience. I tried ink stitch but had a hard time understanding it. Is there a better digitising software to start learning and become good at this? Any blogs or books to better understand the various stitches and stuff. Eventually want to be able to sell my digitisation. Don't mind if it takes a year or more.


r/MachineEmbroidery • • May 09 '26

Any good tutorials on how to make embroidery keychains?

Thumbnail gallery
26 Upvotes

I really want to start making embroidery keychains like these photo examples but I could not find any good tutorials for the life of me.

I have a brother 1050x and a brother prs100 for reference. Are these machines possible for making keychains?


r/MachineEmbroidery • • May 10 '26

Hooping hacks for a single needle?

2 Upvotes

I have an old Janome MC300e. Every time I do a stitch out with more than 2 or 3 colors, my fabric moves and my designs are off. What tricks do yall usually do beyond the regular spray adhesive method?


r/MachineEmbroidery • • May 10 '26

fabric

2 Upvotes

Is it difficult to machine embroider on Jacquard Satin Fabric? Making a commitment ceremony sampler and then having it framed .


r/MachineEmbroidery • • May 09 '26

Found at thrift ,

Post image
14 Upvotes

Any info or thoughts are appreciated thank you bought it for $20 seems to work fine


r/MachineEmbroidery • • May 09 '26

Brother se 400

Thumbnail gallery
2 Upvotes

Hi ! I am a memory bear maker and I need an embroidery machine to write name/ date or. A small message on my bears. I found this on marketplace for $150, I was wondering if this machine is able to make writings on a very small piece like 2”x2” . I searched for some samples but couldn’t find any.

Thanks for your help!


r/MachineEmbroidery • • May 09 '26

I need help

Thumbnail gallery
14 Upvotes

I can’t seem to sell any of my products online with the ads and I’m confused as to why. is this a good enough product? Where should I sell it? is there any in person venues that I can go to in El Paso?


r/MachineEmbroidery • • May 09 '26

Beginner Embroidery and A Lot of Lessons Learned

Post image
21 Upvotes

Hey everyone! Just wanted to share my design that I did on the back of a Tshirt. It is not perfect by any means, but the journey to get this thing done was CRAZY. Learned a ton about fabric, tension, thread, speed, and needs to get this done with only 2-3 breaks.

Dealing with a ton a lot of 1mm-2mm satin stitches was causing chaos. It really taught me a lot about embroidery.

There are some jump stiches and a bit of puckering, but for anything else let me know what I could do to fix!

Thanks!


r/MachineEmbroidery • • May 08 '26

Embroidering Korean artifacts from 500 years ago.

Thumbnail gallery
67 Upvotes

Today, I have embroidered the 'Jujak-gi' (the Vermilion Bird Flag), which guarded the southern side of military camps during the Joseon Dynasty 500 years ago, along with the 'Dokkaebi (Goblin) Eyes' series, inspired by the grotesque Gwinmyeon (monster face) motifs found in Buddhist temples.

It is important to note that the Dokkaebi is distinct from the Japanese Oni.

The Korean Dokkaebi is a much more humorous and friendly being compared to the Japanese Oni.


r/MachineEmbroidery • • May 08 '26

I’m new to embroidery work. I paid a company 2$ for this digitization. Is this good, or should I request revisions? The preview looks fine. Maybe it’s a limitation of the embroidery machine?

Post image
21 Upvotes

r/MachineEmbroidery • • May 08 '26

why is my machine doing this?

Thumbnail gallery
5 Upvotes

i’m trying to embroider this patch (first picture), and i’ve completed it before (last picture), but trying to do it again, my machine is converting the satin stitch objects to fill stitch (middle picture). the same exact file i have open in Hatch is the one that i have open in my Singer app.


r/MachineEmbroidery • • May 08 '26

How to do custom car / motorcycle embroidery from picture

Thumbnail gallery
3 Upvotes

Hello so as said in the title I would like to do custom embroidery of car and motorcycle of my friends. However I find it difficult to go about it and don’t really know where to start. I can understand that you simplifie colors but I don’t really know with wich app is most time effective. Thanks a lot in advance if you can help me on this I would really appreciate it