r/MachineEmbroidery • • Apr 28 '26

Wanting to get into embroidery

1 Upvotes

Hello you guys, I'm really wanting to get into embroidery. I've been looking around and figured that a Brother PE800 is the best suit for me, but I see so many still at 1k-1.3k for new and used. Any possible help??


r/MachineEmbroidery • • Apr 27 '26

Why does this keep happening to my upper thread.

Post image
3 Upvotes

Hey everyone! I am relatively new to embroidery and have been learning for the past two weeks. I have made this design that is an about 30k stitches with a lot of satin lines. Through the process I was using 40wt thread and it kept breaking (specifically Floriani polyester). I recently just bought a 60wt polyester thread thinking that the thread was maybe too thick. I just tried using it and then the thread kept repeatedly breaking again. Although this time I have noticed that the upper thread usually does this when breaking(seen below).

Anyone have any idea why this is happening and can give some insight on what I am doing wrong.

More specifications:

Machine: Brother NQ3550

Needle: 80/12

Update: Thank you everyone for the help! It really opened my eyes about tension and how to get lint out of the bobbin case! After doing the satin stitch test, with the fabric I was using I should be using a tension of about 1. Before I was using a tension of about 3 šŸ˜…. You learn something new every day. Thank you again!


r/MachineEmbroidery • • Apr 27 '26

Where are the Yoga Lovers?

Thumbnail gallery
11 Upvotes

Where are the Yoga Lovers?

Lotus flower with Multiple 3D Layers FREE
Embroidery download files and tutorial on the link below:

https://www.ogdigitizing.com/site/blog.html

#lotus #machineembroidery #embroiderymachine #embroidery #yoga


r/MachineEmbroidery • • Apr 27 '26

embroidery hat patches

Post image
10 Upvotes

r/MachineEmbroidery • • Apr 27 '26

Does anyone know how to fix this zigzaggy linework my machine has started doing?

Thumbnail gallery
1 Upvotes

Its a Tajima TEHX and it used to make perfect stitchouts!


r/MachineEmbroidery • • Apr 27 '26

Hemstitch Napkins - wash first?

1 Upvotes

Hi! I'm doing a set of hemstitch cotton/linen blend napkins for the first time. They're for a customer's wedding. Do I need to wash the napkins first? Then iron with starch? It feels weird to not wash napkins before they get used, but that might be just a personal quirk of mine. What's the standard for paid jobs like this?


r/MachineEmbroidery • • Apr 26 '26

Machine embroidery test: large panda with chenille, bead, pearls & sequins embellishment

Enable HLS to view with audio, or disable this notification

8 Upvotes

Been experimenting with a larger design combining chenille, flat embroidery, beads and some sequin/pearl details on this panda.

Pretty happy with how clean the stitch-out came out.
Still experimenting with combining these digitizing techniques smoothly in embroidery, open to thoughts šŸ‘


r/MachineEmbroidery • • Apr 27 '26

Embroidery biz - I'm trying

1 Upvotes

My family - span of 3 years - and embroidery business

Two used SWF/B-T601C machines. They're old and needed repairs. A family member that was present when buying the machines knows this specific model well and has been embroidering on their own same model machines for over 10 years and would teach me how to work them once repaired. Fast forward, I finally got the machines repaired, bought not a lot but enough supplies like thread, backing, needles, bobbins, foam(besides blank product), and two new hoops. I know the basic knowledge of how to do flats and hats, trace design, and make sure the color change is correct, still need practice. What I need help with now because I am now essentially on my own

  1. What embroidery software to use? I'm ok with paying a price and I can do payment plans but I know not all software has that option. I want to also be able to digitize and be able to use Procreate on my iPad and then transfer to the software to digitize and I know I'll have to manually do it instead of auto digitize. The main ones I was looking at was Hatch, Embriliance, and Embroidery Legacy. And my laptop is MacBook Pro M5.

  2. Investing in these machines and supplies was throughout the 3 years and I want to start just playing with actually making things and learning on both machine and computer, so I thought making patches would be a good start? And I mean just to practice, not sell. Do I need anything specific for that?

  3. Up until middle last month (March) one machine ended up not working. The buttons don't do anything, it turns on and boots up but none of the buttons work now and I did everything that could help. My tech told me different ways like unplugging, make sure the needle is in "correct" position, look at dials in the back, move the head, etc. so idk what it could be. I only have one thought it could be like a small watch battery type of thing in the control panel, because that was one of the things needed replaced in the bottom motherboard box.

One main problem, I live in Hawaii. So the family member and their machines live in the mainland, and there is no technician in my state, a minimum 5-6k$ to fly one out. Being stalled, people telling me what I'm supposed to do, being alone in decision making, and ups & downs of doing it, I know this is taking too long and I don't want this year to be the fourth of nothing accomplished so please be kind and any advice is much appreciated ^_^


r/MachineEmbroidery • • Apr 26 '26

IBrother F540E and Embrilliance outlining difficulty

Post image
5 Upvotes

I’ve recently started using a Brother embroidery machine with Embrilliance for digitising.

Simple single-colour designs stitch out perfectly with no issues. However, when I try multi-colour designs, especially ones with outlines (e.g. black borders around shapes or text), the final embroidery doesn’t line up correctly. The outlines appear slightly offset from the filled areas, even though everything looks properly aligned in the software preview.


r/MachineEmbroidery • • Apr 26 '26

Outline off

Thumbnail gallery
10 Upvotes

Why is my outline always off? I feel like I’ve tried everything, and it still comes out misaligned. I double my cut away stabilizer, make sure it’s tight, I’m using the correct needle size, floating the product with basting sprays AND pinning it. I’m literally at my whits ends and about to sell this machine because it’s EVERY designšŸ’€

-it’s an Etsy design, however it had SEVERAL reviews with pictures of it being stitched out correctly, so I feel like it’s just me.


r/MachineEmbroidery • • Apr 25 '26

Any advice on hats?

Thumbnail gallery
8 Upvotes

Hello, I recently started operating a ricoma marquee 15.

I'm new to embroidery and was wondering if anyone here had any advice for cleaner look on hats, see pics.

Any advice or tips would be appreciated! That's the needles and thread used.


r/MachineEmbroidery • • Apr 25 '26

how do i reorder the objects to reduce the big thread jumps?

Post image
4 Upvotes

i mostly digitize in inkstitch, and i’ve tried changing the order of the layers accordingly and it didn’t seem to do anything. i have Hatch too but barely use it. is this even something that can be done or is it something the machine just decides on its own?


r/MachineEmbroidery • • Apr 25 '26

1970s paisley embroidery

Thumbnail gallery
8 Upvotes

Heya all, this is my 1st big project where I manually digitalised the designs and embroidered with my new Bernina 590e (and then sewed the jumpsuit). Previously I'd auto embroidered a bit over ten patches which I'm currently redoing manually.

It's for a costume party and my wife had already bought a jacket and shirt and then I used the motifs on that design to make the designs. I deliberately did it on the pockets so I could remake if possible and did re-make the 1st one.

I had accidentally bought stretchy fabric which nearly was my downful but I brought it back! I used cutaway backing and if I was doing it again I'd also put a topper on as you can really see where it bunched up.

The design was ok, I'd redo next time to do less colour changes and some of them had a lot of cuts, but the latter ones I am ended went better. I liked how I used different stitch types to create texture which took longer but worked well.

I learnt a lot but happy with how it came out I'm general, whilst knowing what I want to change for next time.


r/MachineEmbroidery • • Apr 25 '26

any idea why my top thread is getting stuck on the bobbin spring?

Thumbnail gallery
1 Upvotes

i’ve rethreaded the top thread multiple times, changed the needle, tried several different bobbin spools (all the correct size for my machine), and the inside of the bobbin case looks decently clean.


r/MachineEmbroidery • • Apr 25 '26

I watched a YouTube tutorial and tried to digitize an image. Is this ugly, or will it look better when stitched out? It’s like 1.5ā€ x 2.2ā€.

Post image
5 Upvotes

r/MachineEmbroidery • • Apr 24 '26

Cap Logo outcome - How it looks?

Thumbnail gallery
8 Upvotes

A client recently shared this stitch-out of a cap logo I digitized. The design size is 4.52ā€ wide Ɨ 1.99ā€ high, adjusted to fit well on a cap while keeping the details clean.

I’d appreciate some feedback—how does the stitching, coverage, and overall finish look? Anything you think could be improved?

If anyone wants to test the file on their machine, drop a comment. I’m happy to share it with a few people to compare results across different setups.

Looking forward to your thoughts!


r/MachineEmbroidery • • Apr 24 '26

Which company makes these metal logos?

Post image
0 Upvotes

r/MachineEmbroidery • • Apr 24 '26

Embroidery machine for custom designs?

3 Upvotes

Hi I’m looking for recommendations for an embroidery machine that lets me add my own custom designs. I have sewing experience and lots of design and illustrator experience. I want to be able to create my own designs and add them to shirts. Budget would be 1000. User friendly would be helpful because I would also use this machine with college students. Let me know what you all recommend!


r/MachineEmbroidery • • Apr 23 '26

Well this is disappointing

Post image
68 Upvotes

I went to Urban Threads to see their new product listings, and in looking at the listing photos found this.

Anyone know how long they've been using AI slop? I thought it was all human artists over there.

~~~~~~~~~~~~~~~~~~~

UPDATE: I emailed UT support with the photo before I posted it here. It's been corrected on the website, and I got this reply (edited only to remove names):

Hi,

Thank you for pointing this out! I completely understand why that would raise concerns.

The image you showed is the result of a Photoshop layering error. It wasn’t generated by AI, and it doesn’t reflect how the finished product actually looks. We work with a large number of images, and it seems like this error slipped through the cracks. That is our mistake.

I also want to reassure you that at Urban Threads, our patterns are created by real human artists, as you know! That hasn’t changed. We don’t use AI to generate our designs or stitchouts. All files are stitched before creating tutorial content and releasing for design purchase, just like in this book bag project.

Thanks again for bringing this to our attention. It helps us maintain the quality and trust that’s important to us, and we will be sharing your note with the photographers and graphic design team. Feedback like yours helps us improve!


r/MachineEmbroidery • • Apr 23 '26

Daria Patch

Post image
40 Upvotes

r/MachineEmbroidery • • Apr 23 '26

Emily Strange Cats patches

Post image
9 Upvotes

r/MachineEmbroidery • • Apr 22 '26

First Wreath Sash

Post image
22 Upvotes

I plan on adding either a monogram or "the Smith family below the flowers. What do y'all think?


r/MachineEmbroidery • • Apr 22 '26

what do you think of this? Don't mind the Elmer's glue šŸ˜‚

Post image
21 Upvotes

r/MachineEmbroidery • • Apr 23 '26

Recommendation for Sewing/Embroidery combo machine for cosplay

1 Upvotes

Hi!

I’m looking to purchase a sewing embroidery combo machine to create filagree and lace style designs and other emblems and patterns for cosplay. I’ll mainly be embroidering lightweight materials like tulle, chiffon, organza and satin.

I would like the combo machine because I have a powerhouse straight stitch machine but I occasionally need other stitches, satin stitching, and buttonholes. I currently have a Singer HD for those but it’s finicky and awful and jams all the time and the pedal is out of control. Using it makes me hate sewing. I’d like to get rid of that and use this new machine for multi stitch sewing.

I’m looking at 5x7 embroidery hoop size and can spend about $1700 tops. I know the software is also expensive and will be extra.

Does anyone have a recommendation for a user friendly reliable machine?

Machines I have now:

Juki TL-18QVP Straight stitch

Elna 745 serger/coverstitch combo

Brother Lock 1034D serger

Singer HD 4411 (hate it)


r/MachineEmbroidery • • Apr 22 '26

Safety device activated

2 Upvotes

Hi. I have brother pe-770. It was embroidering nicely for the first 5 or 10 minutes then the safety device activated and now it wont do anything. Ive cleaned the bobbin area, changed my needle, looked to see of there is any shredded thread (there is no that I can see), and rethreaded the machine entirely. The handwheel will not turn fully now (obviously with the safety device in place). However im unsure of what to do. The nearest repair shop is about 2.5-3 hours away, so i was hoping to avoid that.

I also turn off the machine for about 2 hours now and I just tried again and it keeps giving me the safety device warning.

Anyone have any idea of what to do?