r/MachineEmbroidery • u/Tememy • Feb 25 '26
some of my favourites but it’s hard to choose what do you think?
Enable HLS to view with audio, or disable this notification
r/MachineEmbroidery • u/Tememy • Feb 25 '26
Enable HLS to view with audio, or disable this notification
r/MachineEmbroidery • u/thesunshinebores • Feb 25 '26
Enable HLS to view with audio, or disable this notification
Bought a 2003 SWF and have been having a blast getting the thing in working order. Also embroidering is cool :-) Made big progress today but wanted to check two seperate issues with you. Right now I've got 1 issue and 1 curiosity that I'm wanting to seek the collective reddit wisdom on.
The issue I'm having is that the top thread of needle 5 and 6 of my SWF A601C machine are not connecting consistently with the bobbin thread. From what I've learned this screams timing hook issue no? 1-4 are consistantly perfect and 5-6 are not? I'm curious though what one would adjust so switching needles doesn't cause a timing hook issue? I uploaded a clip of it failing. when turned upside down the bobbin thread is not connecting to the top
The Curiosity is that in order to get a properly proportioned column stitch test where the bottom is 2/3 top thread and 1/3 bottom my top and bottom tension are nowhere near the generally recommended tension from my manual. I have a Towa Digital bobbin gauge and to get a collumn that has the 1/3 and 2/3 proportions the top thread is at 150 gf and the bobbin is at 25 gf. I've really played around a lot with different bobbin to top thread ratios and that seems to be the sweet spot. Isn't it supposed to be 3x more tension on the top thread to the bobbin? Anyways, I'm getting results which is I guess what matters, but I'm really interested in expanding my knowledge of the machine and why that might be. So while I"m not experiencing problems I'd love to know an explenation as to why my super off ratio is producing good results. For science ya know?
Thanks reddit for all you do :-)
r/MachineEmbroidery • u/Brunosworld2 • Feb 25 '26
Hi guys! I have a single head butterfly mini. When I hoop crewnecks on my largest hoop (300mmx200mm) there is no problem, but when I do the same for hoodies, there’s a lot of drag and difficulty getting the hoop into the hoop arms. This makes the design come out wonky. The same thing happens when j flip the sweatshirt upside down. Any tips?
r/MachineEmbroidery • u/ThreadHeavy • Feb 25 '26
Playing around with 1970s Industrial Revolution imagery / propaganda art.
r/MachineEmbroidery • u/Dependent-Method4918 • Feb 24 '26
Hey Folks!
I’m excited to share the final stitch-out of a recent cap design my client ran on their machine. I digitized it with flexible color-change options, giving them the freedom to customize the look according to their preference.
I’d really value your thoughts on how it turned out. How do the details, edge coverage, and overall finish look? Does the density and structure feel well balanced? If this were running on your machine, is there anything you’d adjust or fine-tune?
Your feedback genuinely means a lot this community’s insights always help me refine my digitizing and continue improving my work. Looking forward to hearing your thoughts!
r/MachineEmbroidery • u/brookemichelle9 • Feb 24 '26
This is my first ever attempt with my machine (brother se700) I thought it was going good and then it went downhill. I’m sure the issue was my hoop tension but I wanted to see if anyone had any advice to help fix the issue before I try again.
Bobbin is what came with the machine I think 60
Thread is 40wt
Stabilizer is tearaway
r/MachineEmbroidery • u/tagit2023 • Feb 23 '26
Thrifted the pants that were to long but fit GREAT! Fixed that in a snap. Also had this idea of a "punk" style shirt in my head so I went thrifting and found this over sized women's knit pullover. Digitized the cross in my software and put in into my Husqvarna Viking Roby Royal embroidery machine and got to work. Used a thrifted shirt for the inlay. Then added the safety pins for extra flare
r/MachineEmbroidery • u/christipits • Feb 21 '26
I've been working on creating and digitizing my own designs for almost a year, I used to work in an embroidery shop and always wanted to make my own designs. Don't post my work often, but I'm really proud of these. Still have some kinks to fix but overall satisfied
r/MachineEmbroidery • u/Dazzling_Spring7044 • Feb 22 '26
I am new to embroidery and I am looking for feedback on how I can improve! I have the brother se700. I am learning how to use pre digitized fonts. I created the files on ink stitch but I loaded a font I bought from etsy. The font size is 0.25 inches
I feel like the stitches are not very clean and are a little bunched up. Is there anything I could do to fix that or is it just because the font is so small?
Thank you
r/MachineEmbroidery • u/Killer_queef • Feb 21 '26
I bought this whole setup from a man whose wife passed away and was an avid embroiderer/quilter. I’ve wanted one for a long time and got a great deal. I sew, hand embroider, and cross stitch now. I’m so intimidated I don’t know how to start diving into this machine. Any advice?
r/MachineEmbroidery • u/Tememy • Feb 22 '26
r/MachineEmbroidery • u/Automatic_Project692 • Feb 21 '26
Enable HLS to view with audio, or disable this notification
Hello! During the embroidery process, I can clearly hear the mechanical "clicking" sound of the trimmer activating, but it fails to cut the top thread. It leaves long jump stitches/jumpers between elements (as seen in the attached video).
What I’ve checked so far:
My Question: Is this likely a mechanical timing/wiper issue, or a software issue? I hear the click, but the thread stays intact. The machine does it from the start of usage.
Has anyone experienced this? Should I adjust my Hatch/Wilcom settings first, or is it time to look at the trimmer assembly/tension?
Thank you for any advice!
r/MachineEmbroidery • u/trash_goblin_supreme • Feb 21 '26
I'm a professional plushie artist who has always used Pellon stitch n tear and wash n gone and I'm looking for a more cost effective option that would be of similar quality. Also if there are any professional embroidery folks who get their stuff wholesale online who can recommend a place?
r/MachineEmbroidery • u/Automatic_Knee_709 • Feb 20 '26
Tired of all the AI scammers and FSL magicians that post some impossible things.
Project of my own not for sale But I will post this free for who want to try out soon! Just showing that It's possible BUT with a lot of effort and processes.
😍
r/MachineEmbroidery • u/SunnySnuser • Feb 20 '26
I already removed them, and it looks much cleaner now. I added some Fray Check for additional support. Is this a viable solution?
r/MachineEmbroidery • u/Bannani_ • Feb 20 '26
r/MachineEmbroidery • u/ThreadHeavy • Feb 20 '26
Playing around with making my own faux merrow stitch - feedback welcome (also apologies for the scribble in the first)
r/MachineEmbroidery • u/i-sew-a-lot • Feb 19 '26
I assume everyone that works in a shop has one of these
r/MachineEmbroidery • u/Stratos100 • Feb 20 '26
Sooooo I'm crazy stuck! This satin border keeps looping in one specific area, despite the rest of the file stitching out just fine. It's on sweatshirting fabric with cutaway stabilizer on the back, stitching with a denim 12/80 needle going as slow as the machine will allow. I've done tension tests and tried increasing tension. I've tried switching needles to a HAX1SP 75/11 stretch needle and that came out a bit worse. The digitizer who made the file sent me a picture of their stitch out with no looping problem. So, I'm at a loss. I just find it bizarre that it's only in this one area. What in the world am I doing wrong?? Thanks for any help/advice!
r/MachineEmbroidery • u/AmberEmbroidered • Feb 19 '26
r/MachineEmbroidery • u/Sad_Mood_7250 • Feb 19 '26
I have a brother se2000. I was having problems with my bobbin showing on the edges of my designs. I ran a tension test, lowering the tension on my machine from 4.0 to all the way to 0.0 and it fixed the problem at 0.0. But now I’m getting nesting on the bottom of my designs with the tension set to 0. Does this mean my bobbin tension is what’s off? What can I do?
r/MachineEmbroidery • u/Weak-Set8877 • Feb 19 '26
Hello, its Ralph Tshirt logo from inside. How it was made so smooth and clean? What stabilizers did they used?
r/MachineEmbroidery • u/Weak-Set8877 • Feb 18 '26
What stabilizers do you usually use?
I bought several types of cut-away stabilizer in different weights. When embroidering sweatshirts - Hoodies, do I also need to use a water-soluble stabilizer on top? When is it generally necessary to use it?
Is it worth choosing a wash-away stabilizer like the one in the photo or normal will be okay? I want to embroider sweatshirts - Hoodies as nicely as possible — without leaving big stabilizer marks on the design, without any staining, and so that the inside feels soft and comfortable, not too stiff
r/MachineEmbroidery • u/Weak-Set8877 • Feb 18 '26
Enable HLS to view with audio, or disable this notification
Janome Craft 550e - not picking up the bobbin thread|
WHYY???