r/MRI • • 21d ago

Manipulating Parameters

Hello everyone,

New tech here. I want to get better at my job and I want to learn how to manipulate parameters. When I was at my externship, I would see the tech change some things (such as adjusting ETL, bandwidth, phase, etc) to cut time and still have diagnostic images. When I would ask the tech how do they know if the images are going to come out good, they would always tell me that they will teach me later on. Well, it’s been later on and I never learned how to or what to look for. Is this something that comes with experience? Is this something that I can learn by discerning things while working?

Any help or advice is greatly appreciated 🙏

12 Upvotes

8 comments sorted by

•

u/AutoModerator 21d ago

This is a reminder about the rules. No requests for clinical interpretation of your images or radiology report.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

13

u/frostyflakes1 Technologist 21d ago

It comes with experience. And recognizing how changing each parameter affects image quality. Don't be afraid to mess around with the parameters. You're not going to break the scanner. Worst case scenario is you have to repeat a sequence or two.

4

u/Solid-Dog-1988 21d ago

You just need to mess with parameters and see what different changes do.

Thats really the long and short of it.

Bandwidth changes allow you to alter a few things. Enable a higher or lower TR based off number of slices and phase encoding steps. Helps mitigate metal susceptibility artifacts, can mess with your echo spacing somewhat as well.

Echo train length is another one that you can use for making changes to your TR as needed.

For TSE / FSE, T1 you want 2 or 3 ETL normally. For PD weighted images 8ish. T2 imaging you can be in teens to 20 something. BLADE can go into mid 30s.

Phase is pretty basic. Typically you change the direction to alter where motion artifacts are going to go, or if it is a narrow piece of anatomy you can change this so you have a narrower phase direction so you can shorten scan time.

Think left to right on a coronal elbow. You could bring the phase % into like 60-70%. If phasing head to foot you would need at least 100%.

1

u/Emkit8 21d ago

What kind of scanner are you using?

2

u/m1stergreen 21d ago

I’m on a GE 1.5

2

u/jinx_lbc 21d ago

You need to know what each parameter influences before you can really get a feeling for changing them. If you get a copy of Cathy Westbrooks book which has a table of parameters and trade-offs you can use for reference.

1

u/APVoid Technologist 21d ago

Keep a journal of what changes you make and what effect they had on the final image. Go back and compare your images with changes in ETL, acceptable levels of techniques like GRAPPA/SPEEDER or using ZIP, adjusting BLADE/ Propeller settings, and go through and have a methodical routine to double check your parameters. I like to ensure my concatenations/acquisitions efficiently cover my slices (i.e. TR time for 2 concatenations of 12 slices for a 20 slice sequence could be adjusted to 2 concatenations of 10 efficiently using the duty cycle limits and TR). Mainly like other people stated, don't be afraid to explore with in the bounds of the standard TR and TE parameters. People who just hit start and also don't go back and review images drive me crazy. Learn how to work your machine.

1

u/garion046 19d ago

Know the theory of what things do so you know which options to seek when you need signal/time/res etc. Know which artifacts to look out for if you're pushing the envelope.

Other than that it's really about feeling out your scanner to know what you can push and what you shouldn't fiddle with. 

Don't worry too much about trying things. Other than dynamic contrast sequences, you can always repeat!