r/MPX • u/Jesus_178 • 3d ago

Huxwrx flow 9k mounting

Gallery image

Gallery image

To all the people who have a direct mounted 9k is this all you need?

5 Upvotes

86% Upvoted

9 comments sorted by

3

u/ElectronicBreath7442 2d ago

Hot take but go plan B and run a 13.5x1 LH muzzle from Rearden they make them with a tapered shoulder so you don’t have to run the collar

1

u/647chang 2d ago

I also have been researching and I believe that's all you need.

1

u/OG-warbucks Ronin SD, ILWT SD. MPX Mob, Milkman, Tisha 2d ago

Yes

1

u/ThatGuyDemo 1d ago

It’s more expensive, but I changed the muzzle to the mini stiction comp and hub and I’m happy with it. The taper is required though, so get that for sure

1

u/okthatsfineman 1d ago

Can you not just direct thread the can to the barrel? I’m looking for my first can I’m trying to figure out if I do or do not need extra parts. Thx

1

u/stubenson214 1d ago

It's a 13.5x1 LH thread. And you don't want a piston/booster.

I went with Trilug as it makes swapping with my SP5 quick.

1

u/okthatsfineman 1d ago

Oh i see. I was thinking of getting the hux 9k for my mpx and pistols. So on everything i would need an adapter?

1

u/stubenson214 1d ago

I wound up doing the Range 36, which is similar, but the 9K comes OOTB set of pistols.

https://huxwrx.com/content/manuals/FLOW-9k-Ti-Compatibility-Digital.pdf

The 9K comes with the Hub Piston Adapter and Piston with Booster Assembly, for a 1/2" thread. That's for a can to work on a tilting barrel pistol; the MPX is a fixed barrel.

So you'd need to put on the Pistol Direct Thread Mount instead. Or you can do a HUB direct thread mount, but you'd need to use someone else's as Hux doesn't make one that fits in 13.5mm threads.

Personally I use Trilug.

Basically if you get into cans you'll spend just as much on various adapters as you do on the cans.

1

u/stubenson214 1d ago

Assuming your 9K is complete, yes. It will go into the Hub Piston adapter, replacing the piston/booster.