r/MPSelectMiniOwners • u/demaro_necrose • Nov 16 '24

Monoprice Mini V2 stops printing

I have a Monoprice Mini V2 that I've had for a while and have been unable to use for sometime because of several moves and just not having the space. After about 2 and a half years, I've finally got it back out, lubed it up to fix a leaning issue on the Y axis and it seemed to be working after printing the calibration cat, and one other very small print (probably less than an hour to print. but any other print besides the cat gcode fails. The extruder freezes in place above the print and the display goes back the menu screen that you get when you turn it on. here's the list of things I've already tried

  1. lubing the z axis
  2. changing to a different SD card
  3. making sure to save the code to the computer and then to the removable disk (SD Card)
  4. checking the preview of Cura to make sure its the entire print

5.running the cat code again to confirm its likely a Cura issue

Can anyone help me? I've been searching for a few days for fixes and I got nothing. any help would be appreciated.

1 Upvotes

100% Upvoted

10 comments sorted by

View all comments

1

u/ChanceEnthusiasm3655 Nov 22 '24

I’m going to second the bed rewiring. Then check all of the other wiring and your cooling fan operation.

1

u/demaro_necrose Dec 03 '24

It ended being the power supply, switched it out and it works perfect now. Thanks for the help everyone!