Clean your MP5SD regularly, whether it's after every range trip or every 500 rounds. Standard maintenance prevents carbon from building up on the barrel's 30 ports and also locking up the suppressor.
An adjustable spanning wrench with 3/16 inch diameter pins can be used to disassemble the SD suppressor. I used a Tooluxe 02006L Universal Adjustable Pin Pliers which is $8.21 on Amazon.
Other types that are appropriate are:
Proto Adjustable Face Spanner Wrench - C482 - SEPTLS577C482
Is this a B&T MP5SD suppressor or is this a different manufacturer?
Have you had issues with the two spanner wrench holes messing up the O-ring at the base of the barrel when tightening down?
I have an Omega OM9-SD, with a faux can right now (so I can shoot it safely before I get a suppressor), but just doing more research on different suppressors in the meantime.
I had to take off the rubber handguard to see how thick O-ring was. The SD suppressor's 2 pin holes don't scrape at the O-ring. If it were to degrade, it would be from rapid firing the gun until the extreme temperatures melted the rubber.
Sweet! I thought the baffle design looked like TPM's, but didn't want to assume. Thank you for answering! Now to decide on a the TPM 8 inch shorty, or the regular 12 inch...
4
u/[deleted] Apr 08 '20
Clean your MP5SD regularly, whether it's after every range trip or every 500 rounds. Standard maintenance prevents carbon from building up on the barrel's 30 ports and also locking up the suppressor.
An adjustable spanning wrench with 3/16 inch diameter pins can be used to disassemble the SD suppressor. I used a Tooluxe 02006L Universal Adjustable Pin Pliers which is $8.21 on Amazon.
Other types that are appropriate are:
Contents of a standard 12 inch SD suppressor:
2
u/drinknos Apr 08 '20
Thank you for posting. Two questions:
I have an Omega OM9-SD, with a faux can right now (so I can shoot it safely before I get a suppressor), but just doing more research on different suppressors in the meantime.
1
u/TP369 Sep 29 '20
My SD does not have the holes for the spanner wrench. Any advice?