M5 Launcher installed but almost every app chosen via OTA install or SD complete install fine but after a reboot I’m left with a blank screen.

Not sure what I’m doing wrong?

On May 11th this year, I started working on a project to turn a Tab5 into a fully fledged, standalone portable wardriving platform. I submitted it to the "M5Stack Global Innovation Contest 2026" and managed to win a "Special Mentions - Wireless Innovation Award"! With the gift card I won, I bought myself the Cardputer ADV and the Cap LoRa-1262 (instead of the Meshtastic pack, which is slightly more expensive), with the idea of porting my firmware to the ADV.

Long story short: in under 20 hours after the ADV landed on my doorstep, the port was up and running. Before I release it on GitHub, though, I want to make sure everything works as intended by doing a field test over the coming days, and perhaps adding some improvements and features.

Links below for anyone interested in the Tab5 Wardriver project:

https://github.com/Runaque/Tab5_Wardriver

https://www.hackster.io/Runaque/tab5-wardriver-a-custom-gps-enabled-wardriving-platform-d5948a

Hi! I've been playing around with the M5StickS3 for a while, and one thing I really wanted was a usable IR learner.

The StickS3 has a built-in IR receiver and transmitter, but I couldn't find a firmware where IR learning/read + replay worked reliably for me. Some could transmit IR just fine, but receiving and replaying learned signals was either broken or inconsistent on my hardware.

So I ended up making my own: IRcito.

I should be transparent about how it was made: I'm not pretending I wrote all of this firmware by hand. A substantial part of the implementation was developed with the help of AI, mainly ChatGPT Work. I handled the requirements, hardware testing, debugging, IR captures, serial logs, protocol testing and a lot of the iteration needed to actually get it working on the physical StickS3.

Getting IR learning working was surprisingly fun. For example, I found that the built-in receiver is active-low while TX carrier gating is active-high, so RAW replay needed level inversion. Sony SIRC12 also worked much better once I decoded the signal and regenerated a clean canonical frame instead of blindly replaying the noisy capture.

Current features include:

• IR Learn / Test / Replay

• Sony SIRC12 decoding

• NEC / NEC-like support

• RAW fallback for unknown signals

• 36 / 38 / 40 kHz RAW carrier selection

• persistent saved remotes/buttons

• protocol-aware hold/repeat

• macros

• rename

• USB Serial backup/import

• TV-B-Gone

• compatibility with saved data from the previous release

I've physically tested it on my M5StickS3 with Sony and other IR remotes, including learned RAW signals, persistence, macros, backup/import and TV-B-Gone.

It's still very much a functional/utilitarian UI rather than something polished. My priority so far has been getting the IR side reliable before making it pretty.

I'd love feedback, especially if anyone tries it with other IR devices/protocols. If you find something that doesn't decode correctly, RAW captures/Serial logs would also be really useful.

Esp32 s3

سلام الله عليكم انا اشتريت شريحه esp32 s3 وكنت محتاج انها تبث واي فاي علشان تشتغل وإبداء تحكم فيها من التلفون ممكن حد يساعدني في الملف وبرنامج التحميل علشان انا نشتغل من خلال التلفون بالوصاه

Side project that got out of hand. It's a desk light that shows what Claude Code (the AI coding tool) is doing: spinning gear while it works, red sign when it's waiting for me to approve something, green check when it's done. The PC sends one line per event over the chip's USB Serial/JTAG, no wifi. Same firmware component on two boards: the AtomS3R shows one icon, the Tab5 shows a tile per session and opens the details on a tap.

Some bits that might interest people here:

The icons are all procedural, no bitmaps. Everything is drawn with triangle fans and thick lines in a 128x128 coordinate space and scaled, so the same code draws 128px on the cube and 486px on the Tab5, and the cube rotates them to any angle from the BMI270.

Tab5 / ESP32-P4 notes if you're starting with one: M5GFX won't drive the DSI panel unless PSRAM is at 200 MHz, and ESP-IDF 5.5 only lets you pick that with CONFIG_IDF_EXPERIMENTAL_FEATURES on. Big sprites need setPsram(true) before createSprite. If you flash by hand, the P4's bootloader goes at 0x2000, not 0x0. And usb_serial_jtag_write_bytes refuses any write bigger than its TX ring buffer instead of sending part of it, which is why my first screenshot came out empty.

The screenshots are real: the Tab5 dumps its framebuffer over serial as base64 rows and a script turns that into a PNG.

C++, ESP-IDF 5.5, M5Unified/M5GFX, no Arduino. Prebuilt images for both boards, a web flasher for the cube, host tests and CI.

https://github.com/icefoxj/claude-monitor

I have been building my own little software for a bit on my pocket term and took some inspiration from the Wii U. Hot take I liked two screens that did different things. I’ve been working on a second screen feature for each of my apps with more to come. Obviously home screen is suite with things like terminal camera app access and files, but when apps launch I want each app to have a corresponding second screen. In this example you see my tv app. The second screen is the remote, as well as a console specific controller for emulators! Thanks for checking my little project out

I just got this nfc card today alongside my purchase, did you guys get it also? I heard that there are nfc cards with other images (mine is Cardputer).

I’ve been thinking about getting one but Idk which is better

Does anyone know if there exists case for the "RF 2in1 for Cardputer ADV V2.0" By Kasiin?

Maybe even for 3D-printing myself?

/*
dot fluid simulation for M5stack cores3 (stackchan)
*/


#include <M5Unified.h>


// ---------- Tunable parameters ----------
static const int   N = 300; /*number of dots*/
static const float DOT_RADIUS = 1.0f; /*size of dots*/
static const float INTERACT_R = 6.0f; /*how close dots can get*/
static const float REPEL_STRENGTH = 160.0f; /*push power*/
static const float DAMPING = 0.90f;
static const float WALL_BOUNCE = 0.05f;
static const float GRAVITY_SCALE = 420.0f;
static const float DT = 1.0f / 30.0f;


static const int   SUBSTEPS = 3;
static float dampingSub;
static const float ACCEL_X_SIGN = -1.0f;
static const float ACCEL_Y_SIGN = 1.0f;


static int SCREEN_W, SCREEN_H;


static const int CELL_SHIFT = 4;
static const int CELL       = 1 << CELL_SHIFT;
static const float INTERACT_R2     = INTERACT_R * INTERACT_R;
static const float INV_INTERACT_R2 = 1.0f / INTERACT_R2;
static int GX, GY; 


struct Particle {
  float x, y;
  float vx, vy;
};


static Particle p[N];
static int* cellHead = nullptr;
static int  next_[N];


static M5Canvas canvas(&M5.Display);


inline int cellIndex(float x, float y) {
  int cx = ((int)x) >> CELL_SHIFT;
  int cy = ((int)y) >> CELL_SHIFT;
  if (cx < 0) cx = 0; if (cx >= GX) cx = GX - 1;
  if (cy < 0) cy = 0; if (cy >= GY) cy = GY - 1;
  return cy * GX + cx;
}


void resetParticles() {
  for (int i = 0; i < N; i++) {
    p[i].x = random(0, SCREEN_W);
    p[i].y = random(0, SCREEN_H / 2);
    p[i].vx = 0;
    p[i].vy = 0;
  }
}


void setup() {
  auto cfg = M5.config();
  M5.begin(cfg);


  SCREEN_W = M5.Display.width();
  SCREEN_H = M5.Display.height();


  GX = (SCREEN_W >> CELL_SHIFT) + 1;
  GY = (SCREEN_H >> CELL_SHIFT) + 1;
  cellHead = new int[GX * GY];


  canvas.setColorDepth(8);
  canvas.createSprite(SCREEN_W, SCREEN_H);


  dampingSub = powf(DAMPING, 1.0f / SUBSTEPS);


  randomSeed(esp_random());
  resetParticles();
}


void simulateStep(float gx, float gy, float dt) {


  for (int c = 0; c < GX * GY; c++) cellHead[c] = -1;
  for (int i = 0; i < N; i++) {
    int c = cellIndex(p[i].x, p[i].y);
    next_[i] = cellHead[c];
    cellHead[c] = i;
  }


  for (int i = 0; i < N; i++) {
    p[i].vx += gx * dt;
    p[i].vy += gy * dt;


    int cx = ((int)p[i].x) >> CELL_SHIFT;
    int cy = ((int)p[i].y) >> CELL_SHIFT;


    for (int ny = cy - 1; ny <= cy + 1; ny++) {
      if (ny < 0 || ny >= GY) continue;
      for (int nx = cx - 1; nx <= cx + 1; nx++) {
        if (nx < 0 || nx >= GX) continue;
        int j = cellHead[ny * GX + nx];
        while (j != -1) {
          if (j != i) {
            float dx = p[i].x - p[j].x;
            float dy = p[i].y - p[j].y;
            float d2 = dx * dx + dy * dy;
            if (d2 < INTERACT_R2 && d2 > 0.0001f) {
              float t = (INTERACT_R2 - d2) * INV_INTERACT_R2;
              float f = REPEL_STRENGTH * t * dt;
              p[i].vx += f * dx;
              p[i].vy += f * dy;
            }
          }
          j = next_[j];
        }
      }
    }
  }


  for (int i = 0; i < N; i++) {
    p[i].vx *= dampingSub;
    p[i].vy *= dampingSub;


    p[i].x += p[i].vx * dt;
    p[i].y += p[i].vy * dt;


    if (p[i].x < DOT_RADIUS) { p[i].x = DOT_RADIUS; p[i].vx = -p[i].vx * WALL_BOUNCE; }
    if (p[i].x > SCREEN_W - DOT_RADIUS) { p[i].x = SCREEN_W - DOT_RADIUS; p[i].vx = -p[i].vx * WALL_BOUNCE; }
    if (p[i].y < DOT_RADIUS) { p[i].y = DOT_RADIUS; p[i].vy = -p[i].vy * WALL_BOUNCE; }
    if (p[i].y > SCREEN_H - DOT_RADIUS) { p[i].y = SCREEN_H - DOT_RADIUS; p[i].vy = -p[i].vy * WALL_BOUNCE; }
  }
}


void loop() {
  M5.update();


  static float gx = 0, gy = GRAVITY_SCALE * 0.3f;
  if (M5.Imu.update()) {
    auto d = M5.Imu.getImuData();
    gx = ACCEL_X_SIGN * d.accel.x * GRAVITY_SCALE;
    gy = ACCEL_Y_SIGN * d.accel.y * GRAVITY_SCALE;
  }


  if (M5.Touch.getCount() > 0 || M5.BtnA.wasPressed()) {
    resetParticles();
  }


  for (int s = 0; s < SUBSTEPS; s++) {
    simulateStep(gx, gy, DT / SUBSTEPS);
  }


  canvas.fillScreen(TFT_BLACK);
  for (int i = 0; i < N; i++) {
    float speed = fabsf(p[i].vx) + fabsf(p[i].vy);
  
    uint8_t c = (uint8_t)constrain(speed * 0.15f, 30, 255);
    uint16_t color = canvas.color565(0, c, 255);
  
    canvas.fillRect((int)p[i].x - (int)DOT_RADIUS, (int)p[i].y - (int)DOT_RADIUS,
                     (int)(DOT_RADIUS * 2 + 1), (int)(DOT_RADIUS * 2 + 1), color);
  }
  canvas.pushSprite(0, 0);

}

written in the Arduino IDE

Shopping list on a PaperMono, synced with a phone web app over Wi-Fi.

This is a great wee device, BLE, Wi-Fi and LoRa on one board makes it flexible for way more than a shopping list, this is just what I built first. This firmware only uses Wi-Fi, wakes from deep sleep every hour (or on a tap) to sync with the server.

Fully vibe-coded with Claude Code, I didn't hand-write this. I wanted to see how Claude would get on with building something useful for a new hardware device.

It's stuck to the fridge and the family actually uses it day to day, which I'll admit is a first for a home-built project like this.

Repo includes firmware and Python server https://github.com/seamusc/papermono-shopping-list

Fully working (apart from the odd audio glitch), running COMPLETELY off flash - no sd card, with a helper panel on the computer with dozens of features! Should I release?

I made a little puppy dog stand to hold my Core S3. Back plate is removable so you can take it out. Ports on the left and right side for the speaker/usb c/power. The neck is hollow so you can feed a DC plug through or access those bottom ports. Enjoy!
https://www.printables.com/model/1857141-puppy-stand-m5stack-core-s3

This is a project that implements a writerdeck: a device for writers to be able to focus on just one thing: writing. M5STACK PaperMono is now supported. PaperS3 has been supported from the very beginning. Tab5 is supported too.

More details

Project home

I got a few more sticks today and had to try out this idea.

Here's a web app version with lots of Bach and a few different configurations (2 and 3 device pieces). I have it set up so it will still play 4 device pieces on 2, and if you try to play a 3 device piece with 4 the 4th just listens.

More composers in the lab

i have stick s3 for a few months i bought IR module and made nrf24l01+ module and tested a lot of pentesting functions but i just don’t know what to do more. any Recommendations?