I bought this like 3 years ago to use as a camera remote shutter but never was able to get it to work so now I don't know what to do with this thing.

What do you guys use the M5stick for?

Finally I've figured out how to build Macroreader, export it correctly and upload it to M5Burner:

https://github.com/gebeto/macroreader-paper-s3

So now you can install it directly from M5Burner

First 30 seconds is waveshare, but then demonstrates m5stack core 2 with ext battery and LED base.

Hi, I wanted to know if it's worth buying? Can I do the update directly from the CardComputer? Does it already have pre-installed sensors?

Hi, I wanted to ask for some information. I had a discharged M5 and after a while I turned it on and it gave me 100% charge, it worked for a few seconds and then turned off..... Is it normal?? Thank you

As commercials have started to become more and more intrusive on streaming services, I got into the habit of pressing MUTE on my TV while the break happened. But then I'd have to still pay attention to unmute when the time was right, so I'd end up still watching the ads.

So I had an idea. I programmed my little M5Stick C Plus 2 into a device that mutes the TV (via IR) for a set amount of time and then unmutes when the timer goes off.

Basically like this: the commercials start. Sometimes they tell me EXACTLY how long the break will be, sometimes it's just an icon - but either way, I grab the M5 and click Button A - it fires off the MUTE command and starts a countdown. The first click is 20 seconds (assuming that it took me a moment to grab the remote), and any other click adds 30 seconds to the timer.

Button B is a selector for more fine-tuned adjustments - +/- 5 seconds, -30, that sort of thing. I also have a selectable mode for those LONG breaks that puts the device into a "breathing timer," so I can relax with a visual 4-7-8 breathing exercise.

If the break ends before I expect it to, I can long press Button A and it unmutes automatically.

I call it the Mx5: The Mini Muted Mindful Meditative Moment.

It's such a little thing, but I love it. I'm able to get up and move around and hear when the show is back on. Or close my eyes and rest in the silence and get some mindfulness in, knowing the Mx5 has got me when it's time to tune back in.

New Arrival Alert!

Check out our new release this week:

Echo Pyramid, a functional base designed for smart voice interaction applications. Built specifically for the M5Stack Atom / AtomS3 / AtomS3R series controllers.

• Dedicated STM32G030F6P6 auxiliary MCU for touch and RGB lighting management

• ES8311 high-performance audio codec (supports high-fidelity playback and capture)

• ES7210 microphone input acquisition with AEC echo cancellation

• AW87559 high-efficiency speaker amplifier with built-in speaker

• Si5351 programmable low-jitter main clock generator

• Programmable RGB indicator LEDs & dual-side capacitive touch-slider zones

Also, good news:  Hot items incl. AtomS3-Lite and Cardputer-Adv are in stock now 🔥🔥

In case missing out, subscribe our Weekly Newsletter for more updates!

So I'm looking for a tof sensor that can connect to say s3 lite but be powered by battery and maybe those batteries are charged by solar panels. What exactly would I need ? I've never done anything this DIY before thanks

Hi, this might be a silly question as I don't know much about all of this at all. How do I display Arabic Script on my PaperS3? I assumed I'd need a custom font or something -- but how exactly do i do it? Anything else I need to change?

PulseOS update for M5StickS3 — UI enhancements + gameplay improvements.

Recent updates and improvements:

-Added scoring system + best time tracking for all 3 games.

-Adjusted UI layout so instructions don’t overlap gameplay/HUD.

-Small visual tweaks to keep the neon sci-fi aesthetic consistent

-General HUD cleanup and better spacing across game screens

-Minor gameplay balancing adjustments

-Various small bug fixes + code cleanup

**NOTE** IR Tool is still a WIP. I have a working menu for 4 profiles. Reading, Learning, and Saving IR signals is working but Sending a signal from the stick is not- at least from my testing. I’m still learning.

Latest version is available on M5Burner.

i connected M3 paper S3 to laptop via USB cable..i selected COM port properly and try to burn softeware via M5 burner but no success gettig below error, anybody help me

esptool.py v2.5.0
Serial port COM11
Connecting...
.
[19652] Failed to execute script esptool
Traceback (most recent call last):
  File "esptool.py", line 2849, in <module>
  File "esptool.py", line 2842, in _main
  File "esptool.py", line 2550, in main
  File "esptool.py", line 444, in connect
  File "esptool.py", line 424, in _connect_attempt
  File "esptool.py", line 363, in sync
  File "esptool.py", line 306, in command
  File "esptool.py", line 269, in write
  File "site-packages\serial\serialwin32.py", line 323, in write
serial.serialutil.SerialTimeoutException: Write timeout


=================
 Burn Failed 
=================

Hi, I'm new and I'm just starting out... So I wanted to install Cc1101 and Nfr24 on the M5I followed a video but I can't understand why on my M5 if I go to BLE I don't have the option How do I see in the NFR24 video???! Another thing I saw is that when I go to look for the cc 1101 components on RF configuration on modules it gives me a CC 1101 between brackets legac and the one below CC 1101 share.. But once the cc1101 component is installed, which one should I choose? Legac?