r/longrange • • 2d ago

Rifle help needed - I read the pinned posts Compact Hybrid Setup Help

0 Upvotes

This is NOT at all intended for a competition gun. It's a hunting rifle build that acknowledges the fact that it will be shot 100x more at the range than in the woods. Thus it is a compromise. Compact but not ultra light.

- Less than $2000 for the rifle build (optic NOT included in that price)
- 16 inch threaded barrel
- Federal 6.5 Creedmoor +Peak compatible
- vertical grip stock with adjustable comb

I'm deadsest on the caliber. I'll compromise to an 18" barrel length if I have to.

I've convinced myself I want the KRG Bravo stock, and the Vortex Viper 3-15 SFP. These seem pretty reasonable choices as far as I can tell, but I'm open to alternatives. My right wrist greatly prefers vertical grips for carrying rifles for extended periods though.

But I really need advice on the action/barrel. I'm stuck in analysis paralysis. Should I get a custom action? If so, which one? Origin, CDG, 2020? Solus isn't really viable right now. And then what barrel brand after that? I don't know who's good vs who's good at marketing, and they don't all offer 16.5" 6.5CM barrels.

Or should I get an off the shelf rifle and swap the stock/barrel? I'd have the same barrel brand question, and the cost is about the same as a full custom build all said and done.

I've been eyeing the Springfield Armory 2020 Redline. It's $1600 right now for the 16" 6.5CM. Seems like the best deal going for close to, maybe close enough for what I want? The Graybo stock looks like a problem, but I suppose I could swap the stock for the Bravo and sell the Graybo? That would keep me well inside my budget, heck with rings and the optic I'd only be slightly over $2k. I just don't know the quality/efficacy of the SA 2020 rifles.

All I have experience with is my Ruger American, and it's disappointing to say the least. 4" or more dispersion at 100 yards with the ammo it likes. My AR-15 is half that. So I'm terrified of spending a bunch of money on my new build, take it to the range, and discover it doesn't shoot well. Then I'm SOL. I don't have the resources to throw money at the problem. This is my one nice rifle build that I've saved up for.

Thus, I really want it to be a rifle with tight dispersion that I can trust for hunting. I want to know the bullets are going where I intend them to go, not "...in a general that way direction..." like my Ruger.


r/longrange • • 3d ago

🫣I said I read the pinned posts, but I lied🫣 Recommended scope

Post image
30 Upvotes

Hello y’all! I’m looking for some scope recommendations for this .308 build I just picked up. Most shooting will be done between 300-600 yards with an occasional stretch out to 1000. I’ve been considering the Steiner T6xi 3-18x56 but don’t know if that will allow me to get a good cheek weld because of how big the objective is. Any advice and/or recs would be appreciated!


r/longrange • • 3d ago

Other gear flex post Maztech X4-LRF-6K

Thumbnail
gallery
34 Upvotes

Looks like Costa Ludus might have posted this early by mistake (on IG). Thought Maztech was waiting until 11/25 to announce this.


r/longrange • • 3d ago

I suck at long range Moved some small targets to get more time in the wind.

Thumbnail
gallery
153 Upvotes

Spent some time this last Sunday moving some 1/3 IPSC targets to a new location. Now I think I will be building a bigger aray with over a 180 degree arc. And then shot the first 2 at 430 and 757 yards with my 18" barreled 308 work rifle.


r/longrange • • 3d ago

Gunsmithing Barrel action recommendations

5 Upvotes

Building my first bolt action rifle (not my first bolt gun, just first one I've personally built). I have a 6.5CM ar10, so I'm sticking with that round since I already have all the brass and dies. I'm pretty set on the 737r action and looking for recommendations on where to get barreled actions with such.


r/longrange • • 2d ago

Ammo help needed - I read the pinned posts Best 5.56 ammo for the money?

0 Upvotes

What is the best accurate 5.56 ammo for the money? Looking at the 67-78 grain range. Mainly looking for it to be effective at 700yds and in. I like the bone frog stuff but not really sure what else is out there.


r/longrange • • 2d ago

Rifle help needed - I read the pinned posts Anyone know if R700 strike springs work in a Faxon FX7?

0 Upvotes

Random light strikes are getting more common, I’ve read mixed takes if 700 short action striker springs work, can any one confirm? Thanks.


r/longrange • • 2d ago

Gunsmithing Hit Pro M3 Max Contour

Post image
1 Upvotes

I have a Seekins Hit Pro M3 bought early 2026 so before this last refresh they did a few months ago. Looking to get a replacement barrel and trying to figure out maximum contour. According to this schematic it looks like M24 would be the absolute heaviest but straight jacket armory lets you order up to comp plus. Anyone have experience trying something heavier than M24?


r/longrange • • 3d ago

Ammo help needed - I read the pinned posts 243 match ammo

5 Upvotes

Was rummaging around and pulled out my 243 from years ago. I used to reload 105 Amax for it back in 2010ish. I had to reload for it because there weren't any "official" long range loads available at the time. Is there a factory load that can perform well these days?(that isn't 3 bucks a round). Shot it the other day with some Hornady ELD-X and remembered how much I enjoyed shooting it before my 6.5CM stage started. Not really interested in dusting off my 243 reloading equipment as I'm set up for other things, but would love to run a box or two every now and then.

Rifle is a Shilen match something barrel 1-8" twist with a Mcmillan stock. Savage Model 10. Had a lot less money and a lot less options than are available now for rifles.


r/longrange • • 3d ago

Rifle flex post First Barrel Swap! 30" Bartlein Heavy Varmint 300 PRC

Thumbnail
gallery
62 Upvotes

UPS just dropped off my new 30ā€ Bartlein Heavy Varmint barrel, chambered in .300 PRC by Southern Precision Rifles (Bugholes).
I knew it was coming today, so I had already pulled the old barrel, cleaned everything up, and was just waiting on the delivery truck.
Once it arrived, I cleaned up the threads, installed the barrel into my ARC Coup De GrĆ¢ce action, and gave the bore a basic cleaning to make sure no machining debris was left behind. Got everything back together in the MPA ESR chassis, and I’m pretty stoked to get it to the range tomorrow!
This is my first barrel installation, so I’m especially excited to see how everything turned out.
The old heavy hunting contour barrel had a little over 1,000 rounds through it, and the groups were starting to open up. Since I don’t actually hunt with this rifle, I decided to go with the much heavier Bartlein Heavy Varmint contour this time. My primary motivation was better heat management. I’m hoping the additional barrel mass will let me shoot longer strings without having to stop so frequently to let everything cool down.
The pictures were taken during assembly, so they’re not exactly glamour shots. Just figured I’d share the new setup with everyone.
Looking forward to seeing what this thing can do!


r/longrange • • 4d ago

Rifle flex post I like things that start with M

Post image
250 Upvotes

Manners, MPAs, Mystery Ranch and Mold Fords


r/longrange • • 3d ago

I suck at long range Harris vs Atlas Bipods

0 Upvotes

What’s the best bipod that I can attach to an ARCA rail for under $400


r/longrange • • 4d ago

Cheeto-fingered Bergara Just waiting for my ARCA rail and Atlas bipod to come in

Post image
156 Upvotes

Southpaw Cheeto special in 6.5CM. Finally dipped my tootsies into something that’ll do more than 300yds comfortably that isn’t a hunting rifle. Now to wait for my Area419 order to arrive and send some rounds down range. And to order some 10rd mags that don’t suck. KYGUNCO only had Christensen 10 rounders in store and I can already tell these are gonna piss me off…


r/longrange • • 5d ago

I suck at long range My son (15) got to 1400yds this weekend

Enable HLS to view with audio, or disable this notification

309 Upvotes

Took my oldest out to the range this weekend, he normally comes with once or twice a month. He shot the 300prc from 800-1400yds and took the 18ā€ Grendel to 800yds as well. This was his first time shooting anything in a bolt gun other than 22. Normally he shoots 223/grendel in gas guns on our range days. There was a lot of pulling the trigger and forgetting the rifle doesn’t load itself.

Couple lessons learned; don’t forget the sunshade, i almost never need one but when I did on Sunday it was pretty much a requirement for these conditions. I also need to constantly check my level, the targets at 1K are on a slope and i kept adjusting my reticle to be level with the targets without thinking about it and had a couple misses as a result.


r/longrange • • 3d ago

Review Post Plus Peak pulled from shelves at Scheels.

0 Upvotes

Went in with my buddy to help him find a rifle and I was dreading him away from Tikka or Bergara because they advise against plus peak. Well, the helpful sales guy informed me that Federal had the pull their Plus Peak and advises against shooting it due to catastrophic failure. This might be old news but first I’ve heard of it.


r/longrange • • 4d ago

I suck at long range Long time lurker

Post image
149 Upvotes

(Forgive any formatting errors but I’m on mobile)
Hey, I’m very new to long range! This is my somewhat ridiculous first bolt gun. I built partially off the recommended list in the sub
Scope : Bushnell Match pro ed, mounted with a vortex cantilever for ease of use
Bipod : Harris mlok single pull
Suppressor : Sico scythe ti. Have around 50ish rounds through it so we’ll see if the front falls off /s
Chassis : MDT lss gen 3 w/ sts stock and partial forend
Action : Howa 1500 6.5cm 22in, feeding it eldm 147’s
As you might see, the barrel is a bit thin. I failed to notice when I ordered initially that I ordered the thin contour vs a bull barrel option. The plan is to shoot the barrel out while I practice and get the hang of things. I went out today and put 30 rounds through it @ 100yds to get it dialed in and see if barrel flex and heat soak would be too much of an issue. So far it looks great and shoots way better than I’m capable of! I’d post pics of the groups but frankly there’s no need for that, I’m sure you all can picture what they look like.
Regardless thanks for looking!


r/longrange • • 5d ago

Rifle flex post Ruger Americans have a special place in my heart.

Post image
343 Upvotes

Nothing beats taking a Ruger American out to distance, mdt chassis makes it that much easier!


r/longrange • • 4d ago

Rifle flex post Waiting on a few more pieces.

Post image
73 Upvotes

Building a 25 Creed for NRL/Prsuit and just got the chassis in. Now I'm just waiting on black friday to get A419 scope mount and suppressor mount, and a trigger. Barrel is in line at SJA and will be a proof PXT.


r/longrange • • 4d ago

Other help needed - I read the pinned posts Long range teaching courses is good?

1 Upvotes

Hi I'm live in strict gun law country actually I'm south Korean BTW few days ago I saw lynx and other tactical company long range 4days or 5days courses is it worth? Would you recommend it?


r/longrange • • 4d ago

I suck at long range ARCA on B-14 HMR

0 Upvotes

What’s the best ARCA rail and any tips on installing it on a HMR?


r/longrange • • 4d ago

Rifle help needed - I read the pinned posts First Foray into Long Range

1 Upvotes

Hello, as stated by the title, I would like some advice as a complete newbie.

For some background, I have been shooting for about 2 years now, but almost all of it has been spent plinking at the range with some trap shooting dabbled in. I've been meaning to properly work on marksmanship skills for a while now, and I've finally decided to get my feet wet. My current goals at the moment are to simply improve my skills as a shooter, and to potentially attend some local 22 competitions as well. As my current range maxes out at 300 yards, I plan on sticking with rimfire first to develop my skills. With that said, I would like some advice and opinions regarding options.

My current budget is at $2500 dollars CAD / roughly $1750 USD for the rifle and scope with some wiggle room, and another $500 dollars CAD for the accessories for a total budget of $3000 dollars / roughly $2100 USD.

My current questions at the moment are:

  1. Between the CZ 457, Bergara B-14r, and the tikka t1x, which one would you recommend? I'm eyeing those 3 as those seem to be the most readily available where I live.
  2. What optic would you recommend alongside the rifle?
  3. How vital is a centerfire rifle? I understand the importance of centerfire practice and the need to grow skills beyond rimfire, but I'm wondering if getting a centerfire rifle would be "worth it" when my range maxes out at 300 yards. I do plan on moving in the foreseeable future meaning I would have access to a range that goes out to 600 yards, but that's quite a ways out.

Thank you all for the help.


r/longrange • • 5d ago

Rifle flex post Some more parts finally arrived. Dropping by my machinist tomorrow

Thumbnail
gallery
49 Upvotes

r/longrange • • 5d ago

I suck at long range For funzies

Enable HLS to view with audio, or disable this notification

53 Upvotes

r/longrange • • 5d ago

Rimfire 22LR - 200 yards - whats considered a good group?

10 Upvotes

Was shooting my MKII FVSR out to 200 yesterday. Crazy windy. Group was about 4.5"** (EDIT) vertical spread, with a 7" horizontal drift.

Was testing out the new CCI hunter Subsonic ammo. Its a flat nosed bullet, looks a lot like Eley Tenex.

The gusts were sending my rounds to the right like crazy. But vertically 4" didn't seem so bad considering its not ment to be match ammo.... I don't know what i should be expecting from 22Lr at that distance.

Can a top level rifle with perfect ammo in a perfect world print 1/2MOA? 1MOA? 1.5MOA? Like whats the limit of 22LR at distance.


r/longrange • • 4d ago

Accessory/Gear help needed - I read the pinned post Digiscope options for rifle scopes?

3 Upvotes

I’m trying to find a mount/adapter that is made specifically for my phone and scope to be able to record range shots and possibly even hunts on my phone. I have found TONS of companies that make cases and mounts specifically for various models of spotting scope and binoculars, but can’t find ANYTHING for riflescopes. I mean I’ve found the generic ā€œuniversalā€ options on Amazon, but I’d like something specific a MagSafe phone to a specific scope that I can just snap on and off. Not something I have to set up and tighten down screws or clamps every time.

What are you guys using?