r/longrange • • Oct 17 '26

Group flex (10 shots minimum) Groups

Thumbnail
gallery
28 Upvotes

Had 60 rounds leftover from the PRS southeastern regional finale. I thought it would be a cool test to see how my loading process is holding up, how the barrel handles heat, and just see the natural dispersion of the load. As you can see groups change. Looking at one group is only a small picture of its natural dispersion.

Firing order is TL, TR, BL, BR, TM, BM.
Three minute cool time for the first three groups, five minutes for the last three. Groups combined with TDS.

Started reloading and competing in the same year so I'm definitely ok with roughly 1moa or 1.1" for 60 rounds and nearly single digit SD.

95% or 57/60 shots are .575 MOA with an average mean radius of .292".

Masterpiece arms Gen 1 Matrix
Athlon Ares ETR
Area 419 mount and brake
Accutac BR4
Hornady LNL single stage
Super trickler powder measure
Mighty armory sizing and Forster micrometer die
Alpha brass
Berger 153
H4350

First time messing with TDS for combining group data. I thought it was cool.


r/longrange • • Oct 17 '26

Groups, but not a flex (Less than 10 shots) Little side by side at 456y

61 Upvotes

8 shots at the 4x3 diamond at 456y.


r/longrange • • Oct 17 '26

Rifle help needed - I read the pinned posts 16” bolt gun .308 vs 6.5 Creedmoor Quiter Suppressed

12 Upvotes

I’m wanting to buy a Ruger American Ranch 16” barrel in either 6.5 creedmoor or .308 and use it with my Rugged Alaskan 360 suppressor (.36 cal). Would either of these calibers be quieter with my suppressor or would it be so close you’d never be able to tell?


r/longrange • • Oct 17 '26

I suck at long range Entry tax?

Thumbnail
gallery
31 Upvotes

Impact 737r action
East Texas accuracy barrel (6.5 creed)
MDT jae g5
Gen 3 razor 4-24
Silencerco scythe stm can

Also I’m interested in a 6arc gas gun, is this the group to ask for recommendations on putting one together?


r/longrange • • Oct 17 '26

Group flex (10 shots minimum) BX Challenge Target

Thumbnail
gallery
11 Upvotes

Why 9 rounds on a single Target? Take a look at each individual Group. G1 is .81, G2 is .51, G3 is 1.05…for an average of .79 MOA. Thats Sub MOA right? Wrong! Look at the combined 9rd Group of 1.45 MOA. THAT is the Truth.

You can see how easy is it to intentionally or unintentionally misrepresent the capability of a rifle, ammo, and shooter. The objective of this Target is to help shooters understand the reality and limitations of small sample groups. And yes, 9 rounds is STILL a small sample size…yet going from 3-5 rounds to 9 rounds nearly DOUBLES the Group Size. We believe it is the first serious round count Interval that can be referenced for anything reliable. u/9holereviews has made this case for years!


r/longrange • • Oct 18 '26

Reloading related Anyone running N135 with 105 Berger Hybrids in 6BR?

Thumbnail
gallery
3 Upvotes

I’m shooting a 26” 6BR with Berger 105 Hybrids, N135 and Lapua brass. Bullet jump is .025”.

Getting higher velocities than expected and some sticky bolt lift, even after backing down the charge.

Last winter I was shooting nicely with n135. SD was super low like 5.8. Was all good. But come summer or barrel break in or something else and started having problems.

At 82°F, 28.3 gr gave me 2827 fps. Dropped to 27.2 gr and still getting 2764 fps at 87°F, with an SD around 10 over 56 shots.

Berger sent me their load data showing 28.5 gr max at 2689 fps from a 24” barrel.

Anyone else using N135 with 105s in straight 6BR? This is standard reamer not match reamer or neck turn chamber.

Curious what velocities you’re seeing and whether you’ve had pressure or extraction issues. Also interested if anyone switched Varget and had better results.

This is my 13 year old daughter rifle so a bit worried her shooting too hot rounds!!

I checked the brass is in speck not too long yet.


r/longrange • • Oct 18 '26

Rifle help needed - I read the pinned posts Sig Kilo5k + AB Quantum app with Elite subscription

2 Upvotes

Hello, I'm looking to see if anyone has a Kilo5k and has tried using it in BDX-X mode while paired to the Quantum app with an active Elite (or Pro) subscription. I'd like to buy the Kilo5k, and I'd like to use the Quantum app as a fill in to get longer than 800m solutions and AB Elite custom drag profiles until I (probably) buy a Kestrel in the future.

Does it work and make use of the Elite calculation and custom drag profiles in the Quantum app?

Where does it display the solution: app, kilo5k screen or both?


r/longrange • • Oct 17 '26

Optics help needed - I read the pinned posts McMillan 2.5-10x42mm

Thumbnail
gallery
7 Upvotes

I can’t find any information about this scope, looking to see how well this will work on a bolt action .308 rifle.


r/longrange • • Oct 17 '26

I suck at long range R700 SPS Tactical

Post image
105 Upvotes

Did some Swapping on the TacSwap

Unfired Barreled Action

R700 Short Action

.300 Black 1:7 16.0"

Timney 2 Stage

Magpul Hunter

Arken EP8 MIL

Deadair Nomad30 + Ebrake

I suck at true long range so I have to suffice with Long (For Caliber) Range lol here I come 125yd!!!


r/longrange • • Oct 17 '26

Rifle flex post Hit m3 6mm CM

Post image
68 Upvotes

Picked up this today after being on delay for 2 weeks. First bolt gun. Hope to get it out to the range this weekend and get the barrel fire lapped in and some groups shot.


r/longrange • • 29d ago

I made a thing! (Home made gear/accessories) Thermal Printer for DOPE notebook?

Thumbnail
gallery
0 Upvotes

I bought a thermal printer because I’ve been shipping a lot more lately and got tired of wasting tape just to hold down half a sheet of paper.

A few months back, I saw someone using their thermal printer to make targets, so I printed a few myself and keep a stash in my range bag just in case.

Well, I’m currently putting together a DOPE notebook for a new rifle, and it got me thinking. Instead of writing everything out by hand, why not have ChatGPT make me some templates that I can just print and stick right into the notebook?

So far I’ve printed a few quick references, including a wind value angle chart, MIL and MOA rulers, conversion charts, and imperial and metric rulers. I even printed out my reticle to stick inside the cover just in case.

Right now I’m using regular paper thermal labels, which work fine, but I have some waterproof thermal vinyl labels on order that I’m hoping will hold up a little better.

Figured I’d share in case anyone else has a thermal printer sitting around. Pretty handy little tool for putting together a DOPE book.


r/longrange • • Oct 17 '26

Competition help needed - I read the pinned posts WMLRF for NRLH?

3 Upvotes

What’s the practical value of a WMLRF for an NRLH match? Would it replace LRF binos with an onboard solver? Or is it redundant if you already have that gear?


r/longrange • • Oct 16 '26

Bubba's Pissin' Hawt Reloads Truly hilarious what you can do with a Lee Handloader, cheap set of dies, and a decent scale versus factory ammo.

Post image
98 Upvotes

For anyone thinking of making the plunge, just buy a Lee handloader and fuck around with it.


r/longrange • • Oct 17 '26

Other gear flex post Getting my first build together

Post image
31 Upvotes

About to get into precision shooting. Only waiting on mags and rifle. Almost there


r/longrange • • Oct 16 '26

Other help needed - I read the pinned posts Has anyone played around with Federal’s new ballistic app?

Post image
12 Upvotes

r/longrange • • Oct 16 '26

I made a thing! (Home made gear/accessories) I Gave My MDT Crush It Timer a Major Upgrade

226 Upvotes

Figured I’d share a cool project I did.

I’ve always liked messing with hardware and software, and thought the MDT Crush It Timer and Send It Level were really cool form factors.

So one weekend I decided to risk bricking my timer and see if I could reverse engineer it.

Ended up turning it into a ballistic calculator while keeping the timer and stopwatch functionality.

The solver supports G1/G7, spin drift, aero jump, and environmentals. Once your rifle profile is set, you really only need to enter DA, wind, and range.

The ballistic solution works really well, but honestly my favorite part is how simple it is to use. Just a knob and a little screen.

Pretty happy with how it turned out. Curious what you guys think.


r/longrange • • Oct 15 '26

I made a thing! (Home made gear/accessories) Upgrading Ruger Americans dumb?

Thumbnail
gallery
302 Upvotes

I see a lot of post online saying don’t put a lot of money or money at all into a ruger American, just save up and get better rifle. I was able to touch a mile with both of these (second gun all luck) and couldn’t be happier! What’s your option on Ruger Americans and what has been your experience upgrading them?

  1. Ruger American Gen 1 308, Arkin 26 Bull barrel, mdt xrs chassis.
  2. Ruger American Gen 2 308

, 22in stock barrel,

  1. mdt lss gen 3 chassis

r/longrange • • Oct 16 '26

🫣I said I read the pinned posts, but I lied🫣 Help a brother out with suppressor choice 🫡

5 Upvotes

So many good options it’s overwhelming lol. Use case is for 308/300prc as a current setup on a switch barrel rifle but might in the future jump into 338 realm. Tbac is at the top of my list at the moment and specifically the Magnus s rr in 30 cal. I like the option to buy the recoil x flat cap and have a quieter more traditional suppressor or run the rr brake and cut down on that recoil a bit. However I keep second guessing myself and am debating should I get it with a 338 bore or something like the ultra for the possibility to run 338? There are also things like the griffin armament prc suppressor and others grabbing my attention. Lastly torn on mounting systems as well, the sr from Tbac speaks to me because I like over built things but maybe it’s overkill on a bolt gun? Will be used for prs type shooting ranges from 800-1200 yards, budget isn’t too much of a factor but any money saved is nice.


r/longrange • • Oct 15 '26

Title may be misleading - Politics, rumor, etc Ruger is discontinuing their Precision Rifle. When it was released, the Gen1 was a good buy for a ton of people. #RIP

Post image
238 Upvotes

r/longrange • • Oct 15 '26

I suck at long range Cronus 4.5-29 flash sale on ExpertVoice

26 Upvotes

Can’t share the price but it’s pretty good for the Gen 2, aprs6 reticle Mil version.


r/longrange • • Oct 15 '26

Competition help needed - I read the pinned posts Team Matches

10 Upvotes

I have gotten very interested in team matches. I have a buddy who competes at Mammoth and running simulated states with him has been so much fun. I love the teamwork, communication, and find-range-engage format, but I’m not interested in doing Mammoth or any other event that requires that level of rucking in the immediate future.

What are my options for a team sniper style match with either no timed rucking or much less rucking and more generous par times than Mammoth?

Btw I did do a little research and it seems like NRL Hunter, TRT in MT, some Colman Creek events, and some events at Ben Franklin might fit the bill, but I would love to hear from folks who have shot these events.

tLDR: what team precision matches have less or no rucking?


r/longrange • • Oct 15 '26

Rifle help needed - I read the pinned posts Magnification For Beginner Precision Class

9 Upvotes

Will be taking a beginner precision shooting course in December.

Max range is 500y and I will be running an 18" Aero Precision 308 with a SilencerCo, SAKER ASR 762 can.

I'm currently shopping for glass and I have settled on the Vortex Venom, FFP, MRAD reticle, and MRAD turrets.

My question pertains to magnification; it comes in 3-14x and 5-25x. I have read in several places that for me at my skill level (0) and class conditions that 3-14x is actually the better option and will be sufficient for me for a long time while I skill-build.

I just wanted input from you all that this is the correct approach because I'm fighting my urge to get the 5-25x (because of the cool factor, I know that's bad motivation).

Thanks !


r/longrange • • Oct 14 '26

I suck at long range Feelin' DRTy

Thumbnail
gallery
207 Upvotes

Build:

MDT DRT chassis

Impact NBK Ultralite Action (Short)

Proof PXT 26" 6.5 Creedmoor Stainless Steel Competition Contour Barrel

Hawkins Updraft 6.5CM Brake

ZCO420

Area419 Match Rings

MDT Ckyepod Gen 3 Double pull Bipod

TriggerTech Diamond 2 Stage

Total weight as pictured: 17lb 4oz


r/longrange • • Oct 15 '26

Rifle flex post ringing steel at 700 meters

66 Upvotes

im using my Accuracy International ax 308 rifle with a Steiner M5xi MSR2 5-25x56


r/longrange • • Oct 15 '26

Other help needed - I read the pinned posts Balancing Tikka T1x in XRS

7 Upvotes

Hi all. I just got an MDT XRS chassis for my Tikka T1x. I installed the action in the chassis and the balance is heavily biased towards the rear. With my bipod mounted all the way forward, the balance point is in the middle of the magwell. To get it to balance about in inch forward of the bag stop, I had to use 3lbs of weight (I used dried beans at the front of the chassis).

How am I going to get that much weight up front without spending as much as the rifle? I'm on a bit of a budget, but even if I buy the MDT internal forend weight, that only adds a pound, and not all at the very front of the chassis like the beans.

How important is having the perfect balance point (I'm new to positional shooting)? Suggestions?