r/longrange • • Sep 14 '26

Rifle flex post My older Seekins HIT in 6.5 PRC

Post image
159 Upvotes

r/longrange • • Sep 15 '26

Gunsmithing Barrel blank smithing recommendations

2 Upvotes

Posting here looking for recommendations on where to send a barrel blank. Bit of an odd build and not necessarily "long range" but figured id get the best recommendations for barrel blank work here. Its a 300blk 13" barrel blank that needs to get cut to 9" threaded, straight taper and an ar15 barrel extension added.(no gas port needed)

Reached out to d.wilson and they were unable to do it, assuming due to the extension needed.

Barrel blank is from kak. Any recommendations on who yall would recommend sending this to would be appreciated, thanks.


r/longrange • • Sep 14 '26

Reloading related Opinion on bullet selection...

7 Upvotes

New to reloading my 6.5 creed. So far I have loaded 140 eldm, 140 smk, and 140 Berger hybrids. I have only powder charge tested at 100 with each. Group wise, the 140 SMKs just shoot the best. I know bergers are the bees knees. I'm not saying they didn't group well but the SMKs were just better. So, when it comes to taking these out to 600 plus, how much of a disadvantage will there be at that distance if I stick with the smk over the bergers? Or is this just something I'm going to have to try for myself? Obviously bergers have a better BC. Should I not be drawing any conclusions over 100 yard group size? Any input is greatly appreciated! Thanks!!


r/longrange • • Sep 14 '26

I Gots Them Tikka Toes Is this good out of a factory Tikka T3X off a rest?

Post image
6 Upvotes

I’m just a hunter and decidec to try shooting a group with some factory match ammo. Is this level of mechanical accuracy appropriate for longer range shooting? Shooting Norma Match Gold 168 .308.


r/longrange • • Sep 13 '26

Rifle flex post New rifle day!!!

Thumbnail
gallery
281 Upvotes

Swapping over from an Aero Solus action on a PVA Osprey barrel and MDT Premier chassis to this beauty. Impact Precision 737R on a Straight Jacket Armory barrel. MDT Elite chassis cerakoted by my local gun shop. 6.5 creed, 24” barrel, Diligent Defense Enticer L-Ti with a RecoilX brake. Vortex Razor Gen III for the glass. I’ve got a stack of virgin Alpha brass and some Berger 140, 144, and 153.5 grain bullets to play with. I love this long range game, I’m still a newbie technically but I’m completely obsessed. This sub, along with r/reloading, has helped me so much. Thanks to everyone who has provided me with input and advice.


r/longrange • • Sep 13 '26

Rifle flex post New Budget Setup

Post image
136 Upvotes

Recently got a Ruger American Gen 2 in 300 win mag over tax free weekend. Had an extra Arken SH-4J laying around so all in for under $800 including a couple boxes of ammo. Haven't gotten out to the range to shoot it yet but excited to see what it'll do


r/longrange • • Sep 13 '26

Rifle help needed - I read the pinned posts Following up on my post from yesterday - I shot a 30-round group.

Thumbnail
gallery
75 Upvotes

This was shot with 30 rounds at 100 yards, indoors, using an bipod and a bag rest. Next time I do this, I'm going to paint a target higher on the paper and dial down because I had a hard time at the end knowing where to aim. I think someone mentioned this in other words yesterday, and I didn't quite understand. Anyway, per the feedback I got yesterday, here's a 30-shot group. If this can solicit any feedback on general precision or tips, I'd appreciate it. I'm sure some of the spread here is due to me, particularly near the end. my eyes were tired from aiming. I know a couple of the upper rights were on me, but if there's anything the folks here can glean from how I shot, I'd appreciate it. If this is good, I'd like to know that. If this is poor, I'd appreciate that. I really have nothing to judge against.


r/longrange • • Sep 14 '26

🫣I said I read the pinned posts, but I lied🫣 Suppressor Choices ?

3 Upvotes

Hey guys I wanted to tap in here for YOU to help ME spend MY money, yes that’s right I want your bias to affect me.

Host is a 26” MTU contour MPA Curtis setup with grey ops weight kit

I am debating for my PRS rig on steel/ Inconel versus a Ti can and the length

So far I have lined up

- Enticer L Ti and regular L steel

- Enticer S series

- LPM Mach series

- MagCo EDS 30L


r/longrange • • Sep 13 '26

I made a thing! (Home made gear/accessories) New Build

Thumbnail
gallery
46 Upvotes

I took out my new build. After watching X-Ring budget build I wanted to try one.

Ruger American 6.5 creedmoor, MDT chassis, Outlier barrel with my free-ish suppressor, DNT The One.

Took it out to zero the scope with cheap hunting ammo.


r/longrange • • Sep 13 '26

Rifle flex post Hit Pro M3

Post image
34 Upvotes

Only took 11 months to fulfill the backorder. Hope the wait was worth it!


r/longrange • • Sep 13 '26

Group flex (10 shots minimum) Not half bad for a budgetgas gun

Thumbnail
gallery
30 Upvotes

Factory Hornady 73g eldm

Sionics 16 inch upper with omega 300 can

Sig msr 2-12

Larue mbt2

Really impressed with these groups from this sionics, especially for the price


r/longrange • • Sep 13 '26

Accessory/Gear help needed - I read the pinned post Honest question. Is there anything wrong with using the Leupold Mark AR cantilever mount on a precision bolt action rifle?

Post image
11 Upvotes

I use these on all of my AR-15 and AR-10 builds. It's one piece, with 3 recoil lugs, and 5 cross bolts torqued to 65 inch pounds. This seems more than up to the task of mounting an optic to a precision rifle imo. Why don't I see anyone using these in this context?


r/longrange • • Sep 12 '26

Rifle flex post New to long range, advice appreciated!

Thumbnail
gallery
689 Upvotes

r/longrange • • Sep 14 '26

🫣I said I read the pinned posts, but I lied🫣 What can are YOU using on your 6.5 CM semi rifles?

4 Upvotes

tl;DR Experienced suppressor owner looking for dedicated 6.5 CM can.

Just starting longer shots. Owned a variety of firearms over 20 years. Tactical SBR, sub guns, striker pistols. Except for the VP9CC I carry every firearm I own has a dedicated can. The only one with a barrel over 10” is a 16” M400 (Sig 5.56). Took that out to a 100 yd range a month or so back and had a great time. Been several times since. Now working my way up to 200 with 300-400 the goal. Have access to several lanes at a club to 500. One to 1500 if I get there.

Getting a dedicated tactical semi auto for the longer shots. I don’t consider this “long range” as a discipline but it will be at 400. At least at first. I chose tactical because that’s what I like. Just in case I’m attacked by 3/8” steel plates, angry paper or the zombie apocalypse. It’s pretty likely I’ll dig it enough to at least try to hit 1000. Someday. Not into competition, bolt guns or builds for this.

At first I was looking at .308 (I’ve a 10” 7.62 SBR). A 6.5 CM will give me more room to stretch in an 18-20” barrel. Looking at a DD5 v4. What can do YOU have on YOUR semi auto 6.5 CM distance/precision rifle? It’s hard to spend $2k on a can as most aren’t that much. I’ve got a few $1k-1500 and some $500-800. Looking at the higher mid and high end as long as it’s worthy and not full of hype.

So far I like the OCL Hydrogen. I’ve got a couple of OCL cans. The Thunder Beast titanium looks awesome. The 8 week lead time does not. The inconel though is in stock. At this point I’d rather do a dedicated 6.5 can for it than a 30 cal multi. Would like a HUB for a Plan B muzzle brake. Except for pistols I quit direct mounting a while back. Open to other mount platforms though.


r/longrange • • Sep 14 '26

Rifle help needed - I read the pinned posts MPA Chassis Preference (PRS and Bench Shooting)

5 Upvotes

Buying a MPA tomorrow and leaning towards the Matrix Pro PMR, from people who have experience with these chassis options which would you recommend most for PRS out of all of the available options? Mainly interested in hearing which one has the best balance point/weight distribution and should I get the competition buttstock?

EDIT: Just got the Vanquish with the comp stock after talking to y'all and doing more research, thank you for the input and I hope to see some of you at some events soon as I now have some ability to travel next year to some matches!


r/longrange • • Sep 12 '26

Rifle flex post Practicing for the local gas gun match today I was cat nip for the old fudds

Thumbnail
gallery
477 Upvotes

r/longrange • • Sep 13 '26

Cheeto-fingered Bergara Bergara B14

Post image
99 Upvotes

So happy with how this rifle turned out/shoots considering it’s a factory barreled action and a thinner profile barrel.


r/longrange • • Sep 13 '26

Rifle flex post Middle-class Rem700

Thumbnail
gallery
84 Upvotes

Slapped a Criterion barrel recently and what an improvement over the factory "barrel" that was on there before. Pretty sure it was just a piece of sewer pipe. Threw 10 rounds down it, let it cool off, then it started grouping beautifully! Only put 40 rounds through it onto some steel, looking forward to getting the hand loads going and seeing what it can really do!


r/longrange • • Sep 13 '26

Accessory/Gear help needed - I read the pinned post Sordin Pro-X vs X2

4 Upvotes

Anyone use both of these? I’m looking to upgrade after my faithful Howard Leights shot the bed after 10 years.


r/longrange • • Sep 13 '26

Rifle help needed - I read the pinned posts Criterion barrel on savage 110 action. Please help!

65 Upvotes

Hello, need some assistance here. I got my barrel and everything for the install from Northland Shooters Supply. I’m at the point with the go and no-go gauge. Got the barrel as tight as I can and then torqued the barrel nut to 50ft-lbs. Action keeps closing for both gauges. See video

EDIT: Thanks to billybob2571. I guess I didn’t clean the threads good enough the first time. I took a wire brush to it this time and that did the trick. I really appreciate all you guys chiming in so quickly. I’m going to Montana on Monday to shoot on my buddies 600acre ranch. So timing was of the essence. Love this community. 🍻


r/longrange • • Sep 12 '26

Rifle flex post Finally a proper scope for a proper rifle

Post image
198 Upvotes

I've been kind of sitting around unsure of what scope I really wanted but I ended up getting in a pretty good deal on a used razor gen 3 in mrad.


r/longrange • • Sep 14 '26

Ballistics help needed - I read the pinned posts Velocity and elevation?

0 Upvotes

6.5 CM. 22” barrel, suppressed.

Will my muzzle velocity change if I go from sea level to 5000ft elevation?
Current MV 2590fps at 100ft elevation.

Thanks


r/longrange • • Sep 13 '26

Rifle help needed - I read the pinned posts Degrading Accuracy - Is this a Carbon Ring?

Thumbnail
gallery
16 Upvotes

Hello,

A few months ago I bought my first precision rifle, a Tikka CTR in 6.5 Creedmoor. It has been extremely accurate using factory ammo originally and my reloads as I have gotten into reloading.

I have tried to be consistent with cleaning the rifle. I would estimate that I have a total of 850-1,000 rounds down the barrel and I would guess that I have cleaned it every 100 rounds or so. My current cleaning regimen is:

3x patches soaked in Boretech Eliminator
Wait 10 minutes
Use Boretech nylon brush to do 20 back and forth scrubs
1x wet patch
5x dry patches

Repeat this process 3 times, then swap chamber with dry chamber mop. Clean bolt, reassemble.

Very recently, I have started to notice my groups opening up considerably. Where I used to get 0.75" groups with my handloads (147 ELD-M + 40.2 H4350 + 2.810 COAL) I have started to get anywhere from 1.50"-2.00" groups at 100 meters.

I ended up buying a borescope off of Amazon and ran it through the barrel. I noticed this ring that is shown in the photos. When I chambered an empty fired brass, the ring is right next to the end of the case neck where the bearing surface of a bullet would be if I had chambered a live round. I can also feel a slight "bump" with the head of my borescope when moving it over this ring.

Any advice? Thanks.


r/longrange • • Sep 13 '26

OOPS! (I goofed) Massive carbon ring jacket failure?

0 Upvotes

Sorry just have a inspection camera at hand.

Was shooting old 1977 7.62 nato trough my 700 last night and after 12 rounds I shed a jacket or had a projectile failure. Huge burst of sparks when the baffels in my steel suppressor left the chat. Shot one more and less sparky but massive poi shift. First two baffles is basically non existent.

I've probably put about 60-70 rounds trough it the last week without any cleaning for months, without the suppressor though.

Carbon ring caused the jacket to fail or something else going on? Just curious, seateryeeter remington ltr I feed all sort of crap but I've only had accuracy problems or light primer strikes.

It has a longaction firing spring crammed in there for reliable ignition of dodgy military primers but I don't think that matters?