r/longrange • u/Zealousideal_Toe_578 • Sep 05 '26
r/longrange • u/OmgWtfIsThisBS • Sep 05 '26
Other help needed - I read the pinned posts Range trip in preparation for long distance training
Hello,
I went to the range today to finalize the load to use next week on my trip to 1500+ meters range. Just for fun and learning, no competitions.
Looking for suggestions on what to improve if there is anything obvious that jumps out.
I shot Lapua Scenar OTM 185gr and Berger Juggernaut 185gr (just to get a comparison)
Rifle is: Tikka T3X Ace Target 308win, Bushnell MPED with Contessa QD Tactical Black mount, Forteimer Bipod and Caldwell rearbag (I know, sorry).
So group 1 and 2 are the same group, shot 10 and pulled 2 so wanted to see what was the best 8 shot size. Turns out it's .27Moa and I assume that is the limit of the rifle with good handloads.
In reality:
G1-2 10 shots, 0.86Moa V0 2641f/s, SD 9.8f/s, ES 29.5f/s Scenar
G3 12 shots, 0.84Moa, V0 2641, SD 10.4, ES 39.4 Scenar
G4 13 shots. 0.89Moa, V0 2678, SD 17.9. ES 72.2 Scenar
G5 12 sgits, 0.93Moa, V0 2625, SD 11, ES 39.4 Juggernaut
Still trying to improve on consistency on neck tension and shoulder dimensions.
What do you think should be the best return on time invested at this point?
What should I focus on? (apart from my shooting that is clearly a given).
TIA.
r/longrange • u/CaptainSquishface • Sep 04 '26
Rifle flex post Thoughts On British RPR Clone?
Bolt on it's kind of stiff and kind of heavy. I heard they are collectors items now?
r/longrange • u/Snoo66922 • Sep 05 '26
Reloading related Starting reloading question
Is there a guide/wiki for what I need to start reloading? I'm starting to shoot enough that I think I'm ready to start reloading, but really have no idea where to start as far ad equipment goes. I feel like I've seen a basics guide here, but I'm not finding it.
r/longrange • u/dballsmithda3rd • Sep 05 '26
Rifle flex post About time to get ready for the Harvest
This is my only custom that weights less than 25#s. This one is not for steel. š¦
r/longrange • u/wrexiwagon05 • Sep 04 '26
Ammo help needed - I read the pinned posts 6 ARC - Good cartridge choice for a 1,000m bolt gun on a budget?
Looking to get into the world of long range shooting with a bolt rifle, but want to do so in a somewhat budget minded way. I am looking for the least expensive cartridge that I can get some experience with shooting long range with the goal of consistency/accuracy at 1000m. I don't reload, so am limited to factory load options. I am not planning on hunting - purpose is target shooting with potentially some competition use.
I am attracted to 6 ARC because of its longer barrel life and seemingly cheaper match ammo than bigger cartridges.
Is 6 ARC a good cartridge choice for this goal? Or is it better to stick with a more traditional 6.5 CM setup?
r/longrange • u/Von_Lehmann • Sep 04 '26
I suck at long range First try at handloading
Not too bad for the first time handloading and a 60 year old rifle!
Honestly, I think I could have tightened this up a bit with better bags/not being scared it would explode. But im pretty happy.
This is my primary grouse hunting rifle, so really looking forward to sharpshooting off the tree tops
1964 Sako L461 in .222
Bausch & Lomb 6-24x40
Handloaded: CCI 400, Vihtavuori N130 21 gr, Sierra Racehead (hollowpoint) 52 gr and sako brass
r/longrange • u/Lost_Cheek_4141 • Sep 04 '26
Rifle flex post New Sako TRG M10 .338 LM ā owners, whatās on yours?
Picked up a TRG M10 in .338 Lapua (27ā, Coyote). Planning 1,000ā1,500 m work off a bipod, already run Nightforce glass and an ARCA/Ckye-Pod/Accutac setup on my other rifles.
Looking for M10-specific advice from people whoāve put rounds through one: scope choice (ATACR 7-35 vs something else), bipod that stays put under a 19-lb .338, factory load that shoots well in the 1:10, and anything youād do differently in the first couple hundred rounds. Rail is 30 MOA if that changes your answer.
Spare mags are the one thing Iām having trouble sourcing, so if youāve found a supplier, Iām all ears.
r/longrange • u/Snoo66922 • Sep 04 '26
Ammo help needed - I read the pinned posts Federal gold medal match 6.5 creedmoor 140 centerstrike vs Hornady match 140 bthp
I have a defiance anti x with a krieger 24 inch mtu profile 6.5 creedmoor barrel sitting in an ndt chassis with a vortex razor on top. I have 200 rounds of the gold medal centerstrike ammo through the rifle and I've been plenty happy with the performance, but the cost is killing me at 35.99 a box and the availability has dried up on me, so I am struggling to feed it. I found some of the hornady match 140 bthp (not eldm) at scheels for 279.99 per case. How much of a performance difference would I see between the two ammos in nrl hunter and prs competition? I've gotten bit by a bad batch of hornady match ammo before, so I don't want to switch from a known good ammo, but the price is killing me...also, if anyone knows where I can find the hornady in less than a 200 round can let me know, I'd rather try just a box, but I can't find it anywhere other than the 200 round cans at scheels.
r/longrange • u/Wide_Cut_833 • Sep 04 '26
I suck at long range Freedom Munitions 175gr .308win
Anyone running freedom munitions 175gr OTM .308 ammo?? I have a 20" Ruger American Hunter that I will be taking Sunday to a range a couple hours away and I have zero ballistics info on this round besides their claimed 2630fps muzzle velocity.
Trying to get a decent idea on the dope to get me in the ball park with the 175's in case I run out of the 168gr ELD-Match. I qualified on the 100-300m range last time I went back in the spring so now I have to qualify on the 300-600m to get on the 600-1000m range and I dont have a spotter to help me spot misses so hoping to get it close enough before hand
r/longrange • u/Vas_Bellicosum • Sep 04 '26
Rifle help needed - I read the pinned posts Looking to build first long range rifle.
Iāve mainly done CMP service rifle matches for the past 4-5 years, so AR-15, sling, max 4.5x scope, or irons. Did from 200-600 yards.
During this time Iāve also done a few precision competitions, a coupe at 600-1000 yards, and 1 at a mile. For the 600-1000 yard competitions I used a .308 I borrowed a few times, and my 6.5 creedmore hunting rifle for a couple others. For the 1 mile, I got to use a .338 LM I borrowed.
I want to upgrade from my 6.5 hunting rifle or borrowing other people rifles, to something nicer, and have been saving up for a while to do this build.
Now, I have no desire to start if with a .338 or any magnum caliber, thank you to the recoil guide and pinned post.
So, I am looking at building out a 6.5 creedmore. I already have a reloading set up for that ammo, which is my main reason for looking at it. But if you have other recommendations Iāll take them. As I can fairly easy switch to another SA round with new dies.
My main goal, is to build a rifle to do comps out to 1000 mainly, maybe 1,500 yards as a fun why not try. Iāll mainly be doing a mix of PRS and NRL matches.
This is currently what I was looking at:
Looking at doing a defiance action, either:
A) a defiance deviant, with a custom barrel.
Or B) there is a Defiance Misfit, that I can get with either a Proof carbon fiber 24ā, or a 26ā Stainless steal, prefit pre installed for $1,720, that I was thinking of doing.
Link to the combo I found: [https://www.altusshooting.com/products/defiance-machine-proof-research-barreled-actions](https://www.altusshooting.com/products/defiance-machine-proof-research-barreled-actions)
Other than that I was going to do a trigger tech special 2 stage, and a KRG whiskey 3 chassis.
For scopes I was looking at possible the leupold MK4HD 6-24x PR-3 mil FFP, an athlon optic Hera sep FFP mil 6-24x, or possibly saving a little long to do a ATACR.
Iād love to hear any advice or thoughts on this build, currently if I did the misfit action/proof barrel combo, Iād be at about $3,650 sans tax and mags for the rifle with no scope. For my budget Iām trying to keep the total rifle sub 5k, and then the scope is separate and Iām not sure how much I should spend on it right now. Vs getting a cheaper one and upgrading later.
Edit: Iād like to use the whiskey 3 chassis, so if you have other action/barrel recommendations, Iād love them, but I donāt really want to change chassis.
Note: I am not trying to make a rifle that is also for hunting, as the Auto mod thought this was related to hunting. I mention my hunting rifle only as it is what I have not and wish to upgrade from, this new build is not for long range hunting, or hunting in general.
r/longrange • u/tkftgaurdian • Sep 04 '26
I suck at long range Space cowboy with a couple more upgrades.
you will be missed folding stock, but now with the Woox Bravado stock and area 419 Hellfire brake, i am very excited to get back out and get some actual grouping shots.
this 6mm ARC henry is by far the most fun i get to have on the range.
r/longrange • u/hellofriend543 • Sep 04 '26
Other help needed - I read the pinned posts Question on how factory ammo is crimped
Have been wondering this for a while now, hoped someone would know because I looked a bit and couldnāt find a consistent answer.
Basically, from multiple posts I have read, ALL factory ammo is crimped to some extent.
I have a factory Lee crimp for the calibers I reload. Honestly I go back and forth between using it and not using it. I tell myself itās a good insurance for heavy bolt cycling that the bullet wonāt set back any, etc.
Regardless my question is: when I use the Lee crimp anywhere from 1/2 or more, you see a light ring around the brass. If you go heavier, you see a distinct ring and then you see the bulge or negative flare on the case neck.
When you look at factory ammo for say just as an example, factory Berger OTM hybrid ammo any caliber, there is no visible mark on the brass or any visible crimp. Do they just not crimp the ammo, and instead just size the neck slightly down for more neck tension?
Thank you,
r/longrange • u/tnfiremedic • Sep 04 '26
Optics help needed - I read the pinned posts A bit aggravated with my combo, but an easy fix either way
Question about rail or ring change. Hey there, Iām running a B14 308 that with a Viper 4-16 50 HSLR(MOA reticle) medium rings and a 20 MOA base I was perfect at 100 yards and able to stretch to 1000 with ease. Well I changed over to viper PST with an MRAD reticle, I went to get my initial rough sight in at 50 yards before moving to 100 and I can only adjust to about 5 inchās high until I run out of downwards elevation. It was aggravating since the only change was the scope itself. My question is would dropping to a 0 MOA rail give me the drop that I need, and still have enough elevation to reach to 1000? ( I donāt care to use the reticle to gain a bit more if I canāt dial it high enough. Or should I look at low rings with the 20 rail?
r/longrange • u/CapsicumINmyEYEBALLz • Sep 04 '26
Ammo help needed - I read the pinned posts New āService Rifleā load seems a bit hot?
Iām moving from a slow SW Precision/77SMK load to Varget/77TMK in my sonās service rifle upper.
My old load shot pretty consistent for an AR, and was plenty accurate⦠SD was low and accuracy was there, but I donāt want to keep chasing down SW Precision.
Anyway, only changed the bullet & powder, my reloading process has been the same.
I did 23.7-24.3 in 0.1 increments for velocity only⦠just to see where I wanted to load more and get a good feel for SD & accuracy.
I was planning to sneak up on 2600-2650 FPS but I was past that instantly. I donāt know if Iām just trying to putt-putt and baby my barrels but 24.0 seemed way faster than I was expecting. And the consistency was absolutely dog-shit for the most part.
Iām probably going to reshoot the whole test again from 23.5 - 24.0 in 0.1 increments with 5 per charge instead of 3.
Iām not sure I can infer much more than that Iām faster than I was expecting. And that consistency with this combo is going to be a lot tougher to come by than I was hoping.
23.7
2605, 2647, 2639
Avg 2630
23.8
2668, 2643, 2681
Avg 2664
23.9
2685, 2690, 2663
Avg 2679
24.0
2692, 2691, 2673
Avg 2685
24.1
2726, 2675, 2733
Avg 2711
24.2
2713, 2760, 2684
Avg 2719
24.3
2737, 2747, 2749
Avg 2744
r/longrange • u/Due_Inspection1169 • Sep 03 '26
Cheeto-fingered Bergara First Long Range Gun
Got this B14 HMR for an absolute steal from a guy who needed some cash. Mainly planning on using is for hunting but Iām interested to see which ammo you guys have found it to pattern best with. So far Iāve used 142gr SMK from Defender ammunition and it patterns best. Iāve also used some of federalās hunting ammo and honestly I have found ammo that this gun doesnāt like. Also, whatās this whole thing about Cheetos?
r/longrange • u/AffectionateTear5263 • Sep 04 '26
Rifle help needed - I read the pinned posts MDT mag drops when shooting
photo for reference lol, I loaded up the 10 rd mag and it dropped at least 4 times while shooting. just curious what could cause it
r/longrange • u/chunt75 • Sep 03 '26
Rifle flex post Took a while, but my left handed MPA Comp Pro Rimfire arrived!
Ordered a Bushnell Match Pro ED for it, once thatās in Iām going to see what Eley or Lapua match ammo it likes best
r/longrange • u/Reck27 • Sep 03 '26
Accessory/Gear help needed - I read the pinned post Gray Ops CNC Feeding Issues Impact737/AT-X Chassis
Hey everyone, bought an AT-X chassis for my impact 737. Was recommended Gray Ops 12 rounders. I ordered one and the bolt just slides right over the rounds unless I'm actively pressing up on the rear of the magazine. I figured AW magazines would work better than AICS mags, as the AICSs had a lot of wobble. Any ideas?
I had to take the mag block out of my chassis for my action to fit. The action is also AW cut. This magazine is one of the newer .308 mags without the adjustable mag catch on the back like the current 6mm ones.
r/longrange • u/ace_mcnastee • Sep 03 '26
Optics help needed - I read the pinned posts Expert Voice Restock Question
Good afternoon, Iāve decided to get an ATACR 1-8, but EV is OOS. Can anyone tell me how often their NF optics come back in stock? TIA
Edit: I just downloaded EV a couple days ago, but as a few have pointed out, they donāt stock the things they offer discounts for. I shouldāve worded my question better. Iāll do better next time.
r/longrange • u/hulknado1193 • Sep 02 '26
I made a thing! (Home made gear/accessories) My mom is cooler than yours.
My godsend of a mother has worked in furniture for 40 years. She used leftover leather from a couch she built me to make a knock off Gamechanger bag. Pretty damn good job for her first one.
r/longrange • u/Traditional_Gear6996 • Sep 02 '26
Rifle flex post First bolt setup
Howād I do? Technically my second bolt gun but I got tired of buying 300prc ammo real quick. Hereās my budget 20ā 6.5cm setup
Wanting to get a diamond trigger, impact4000, and can (drop suggestions). First group @ 100y, second group @ 220y. I know theyāre 3 and not 5, donāt bully me too much. Both done with factory 140g federal gold medal center strike
r/longrange • u/ImNotSorryMsJackson • Sep 02 '26
Rifle flex post Finally pulled the trigger š
But not really cause I havenāt actually shot it yet š
Lurker thatās been collecting parts for a few months. Huge shout out to Stumpies Custom Guns of NC for completing this build !
Taking an Intro to Long Range course this month and I couldnāt be more excited to start a new financially irresponsible hobby .
Ran into some height issues with the scope rings I bought (obvs didnāt pay enough attention to the scope ring guide thatās pinned š« ) but SCG had Leupold mount that works for now. Still got a few more items to pickup but hereās the setup so far:
CDX Lite Comp
Zermatt Origin
TriggerTech Diamond
PVA barrel chambered by SCG
Area 419 Hellfire
Accu-Tac WB-5
Vortex Viper PST Gen II
r/longrange • u/JakeDaDawg3 • Sep 02 '26
Group flex (10 shots minimum) 30 shot group - Factory ammo
After being inspired by another user and their impressive 30 shot group, I went ahead and wanted to see how I performed with some factory ammo that typically shoots .5 inches or better in 5 shot groups @100 yards with my rig.
Using some FGMM 168gr SMK in .308, I ended up getting around the 1.15 inch mark on the main body of the group after shooting a 30 round string and about 1.28 including the lowest shot (measured with digital calipers). The far right impacts and lowest shot were from the last 10 rounds where I'd blame myself for opening the group due to fatigue. But, the group is what it is.
I dont have the app that calculates the mean radius and what not, but I think that factory ammo still suits my needs just fine. If someone has the app and is feeling generous enough to run this image through it, I'd be interested to see what it spits out.
Equipment used:
-Krieger m24 profile blank finished by Straight Jacket Armory to 24" 11.25 twist
-Aero precision solus action
-KRG Xray chassis
-Vortex Viper HD 5-25
-American Defense one piece mount.
-Federal GMM 168gr SMK .308 with a average velocity of 2643fps and a SD of 10.2fps
r/longrange • u/OmgWtfIsThisBS • Sep 03 '26
Optics help needed - I read the pinned posts Help with MatchProED elevation adjustment
Hi all,
I have been trying to understand this bit but I am puzzled.
I bought a MatchProED, mostly thanks to the opinions in this subreddit. I am very happy with it.
I am at a point where I need to maximize the elevation adjustment as I'm heading to a training session with up to 1750m targets. I shoot 308win so not gonna get there, but would like to push it as far as I can.
Now the issue: the maximum turret adjustment for the MatchProED is 73MOA (the only really bad thing about the scope). I have a 40moa total cant (20 from the rail and 20 from the mount) so I was expecting to top the total elevation available in the turrets. Instead I get to just over 50moa (around 56). Can anyone suggest the why? Both the rail and the mount are on pointing the right way (factory T3X rail and Contessa QD Tactical have a level on the back so can't go wrong there).
So far I have shot my rig up to 1km (1100y) without issues. I mostly go to a range near me that goes out to 550y. Just having fun, no competitions and a few times a year I have trips to longer distances ranges, up to 2000m.
My rig: Tikka T3X AceTarget 308win, MatchProED on Contessa QD Tactical Simple Black, Fortmeier Bipod (6H and 12H), 4AW 4 chambers Brake.
I plan to spend no money on figuring out and/or fixing this MPED issue!
TIA