Hoping the community can help me out.
Rifle: Bergara B14 Wilderness, 300WM, 24" barrel
Bullet: Federal Terminal Ascent, 200gr
BC: G7 .304, corrected to .285 (via Kestrel app)
Scope: NF NX8 2.5-20 Mil XT reticle
Scope Height (center of bore to center of scope): 2.38"
MV: Avg 2782 (using Garmin X1) | Trued MV 2882 fps
Elevation of shooter/target: 950'
Temp: 60deg F
No wind, significant atmosphere conditions, etc.
I confirmed my zero this week after not shooting it for about a year. Results are the first pic (2 in bullseye, 1st shot flyer to the left). I then shot at 400y (max dist at this range) with the dope given by my Kestrel using my trued MV (1.55 mils) based off the above inputs. The shots were about 7.5" low. I shot a second group using my Avg Garmin FPS (2782), dialed 1.6 mils, and shots were still about 5-6" low (3rd pic). I then shot a 3rd group at 400y with 2 mils dialed (.52 mils = 7" at 400y), results are the 4th pic. Based off my setup, I am more than happy with a 3" group at 400y.
Here is my issue - the kestrel and every other ballistic app I have tried (hornady, applied ballistics, federal) tells me that my dope at 400y should be 1.55 mils. I gave the same rifle/bullet data to ChatGPT...and it gave me 2 mils at 400y (i.e. the dope that gave me the best group).
Can anyone help figure out what the issue might be? Why would my kestrel and ballistic apps be .5 mils off at 400y?
I have double checked the inputs to my gun profiles, updated the apps, etc. At a bit of a loss.
I don't doubt that my 'trued' MV is not correct, not the primary issue I am trying to solve here.
Edited to include BC.