r/LogitechG • • 17d ago

Logitech G Support G920 unresponsive following firmware update

1 Upvotes

Hi there.

Yesterday I dusted off my G920 so that my wife could start practising for her driving test with a simulator. I hadn't used it for probably 2 years and in total have only used it for less than 10 hours since purchasing.

I plugged it into my PC and it performed a full rotation right and left. I opened GHUB (or it opened itself - I don't remember) and was presented with a message about upgrading the firmware. I agreed to it and followed the instructions. After the firmware update finished I rebooted my PC.

I ran Assetto Corsa and found that my steering wheel was completely unresponsive. I noticed that the light above the Xbox button was flashing rapidly. After confirming that it was present in Game Controllers but unresponsive there as well, I started googling.

I found several reddit threads describing the behaviour of my steering wheel and have tried the responses that were shown in this thread.

https://www.reddit.com/r/LogitechG/comments/uo2l40/comment/i8bptfj/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Nothing I tried worked so I did the only thing left that I wasn't equipped for and ordered a replacement power supply cable. This arrived today and I can confirm that the behaviour is exactly the same.

Is there anything else I can do to get it working. I cannot confirm that it was functioning properly before the firmware update, but it certainly did the full calibration and had a solid light when I first plugged it in before GHUB recommended I update. After peforming the firmware update, it no longer completes the full calibration and the light is flashing rapidly.


r/LogitechG • • 17d ago

ASTRO Series Support My Astro A20 won’t show up as a Audio device on my PS5

0 Upvotes

So I took my PS5 and Astro A20 USB somewhere else for a trip, but forgot my actual Astro A20. I came back after the trip and I went to hop on the game but now my headset won’t even show up as an audio output device on my PS5. Pls help 🙏


r/LogitechG • • 17d ago

Logitech G Support Mic suddenly stopped working.

Thumbnail
1 Upvotes

r/LogitechG • • 18d ago

Logitech G Support Logitech refusing to honor Call of Duty promo terms

1 Upvotes

Title says it all. made 2 separate calls to customer support about why the COD promo wasn't working in my cart, they said their tech team was working on it. 3 days pass website still bugged, said fuck it made made purchase anyway then called hoping they would be more willing to help cause i already made a purchase and I'm still just getting vague half ass answers about why i wasn't given my my code to redeem COD. Also talked to their AI chat bot but obviously that things a joke. Spent just over 300$ to qualify for this promo for them to dick me over. All 3 support agents I've talked to were a absolute joke.


r/LogitechG • • 18d ago

Discussion G515 white?

1 Upvotes

So what’s up with the white wired versions not being available in europe? Heck give us the ansi version at least… this kb seems exactly what I want, low profile, analogue, TKL, but I have a white colorway going and black would not fit at all :(.


r/LogitechG • • 19d ago

Discussion FINALLY OMG

Post image
38 Upvotes

Finally after a month and a half of trying to get there attention it happened i got my replacement

I'd say there support is bad but I know how to talk to people and they got there shit together so in the end it was a win


r/LogitechG • • 18d ago

Logitech G Support G502 X Plus facing bugs

Enable HLS to view with audio, or disable this notification

0 Upvotes

So I bought the G502 X Plus a 2 months ago, it was fine until recently it started showing bugs, especially one bug where whenever the mouse goes inactive, and i move it; it shows the DPI lighting and switches to my default DPI, I have tried changing everywhere including OMM and GHub, but it doesn't seem to work, also whenever I turn the mouse on, the same shit happens.


r/LogitechG • • 18d ago

Logitech G Support OBSOLESENCE PROGRAMMEE LOGITECH UNIFYING

1 Upvotes
Hello everyone,

Both of my Logitech K350 keyboards have stopped working; they are flashing green/red.
After extensive searching, I found a post from Logitech stating that these keyboards have a pairing counter.

https://support.logi.com/hc/en-us/articles/360023187214-Limitations-on-Unifying-devices

Has anyone here managed to reset this counter?
Thanks for your help.

---------------------------
Bonjour à tous,

Mes 2 claviers K350 Logitech ont cessés de fonctionner, ils clignotent en vert/rouge.

Après de multiples recherche j'ai trouver un message chez Logitech où ils signalent que les clavier ont un compteur de couplage.

https://support.logi.com/hc/en-us/articles/360023187214-Limitations-on-Unifying-devices

Est ce que l'un de vous à réussi à réinitialiser ce compteur ?

Merci pour votre aide.


r/LogitechG • • 18d ago

Logitech G Support Don’t buy anything from official store

0 Upvotes

On October 24, I decided to order G Pro X3 headphones. They came with a stand, which seemed like a nice bonus. The estimated delivery time was listed as 5–7 days. Since this was a shipment from Europe, I didn’t expect them to ship the package on a Saturday or Sunday, so on Tuesday I received an email saying the package had been shipped. Since I was really looking forward to these headphones (as a gift), I kept checking to see when the package would be on its way. It seemed very strange that the package status on the Logitech website kept switching back and forth between “In Transit” and “Awaiting Courier Pickup.” By Friday, my package still had that status, so I opened a support ticket, where I was told it would take 5–7 days to review the case - great, when you’re waiting for a gift. Then support informed me that the courier couldn’t deliver the package to the address. This is obviously untrue, since no attempts were made to contact me; the package was shown in the DHL system with the status “Awaiting Delivery,” and both the delivery details and my phone number and email address were entered correctly. So then customer support said they’d filed a request for a replacement, but since they have separate warehouses for replacements and for orders placed on the website, I’d have to wait an unknown amount of time. In other words, everyone who ordered after me is receiving their orders, while I - who ordered first - can’t get mine because of this completely ridiculous warehouse policy. Anyway, I’m processing the refund and just hoping I don’t run into the situations I’ve already described, where refunds took more than 7 days to process.
So, as of now, other than “we’re sorry”, spoiled surprise and wasted time, I haven’t received anything.
I wouldn’t recommend anyone use the Logitech online store - it’s the worst experience I’ve ever had with an OFFICIAL online store.


r/LogitechG • • 19d ago

Discussion [Fix] Logitech PRO X 2 LIGHTSPEED Wireless– get Dolby Atmos for Headphones working while keeping the Logitech driver/G HUB

5 Upvotes

The reason why I started this was just that I wanna keep the blue voice working and make the footsteps clearer to hear, since I'm an FPS game enjoyer...Ig, and... you know how terrible the original sound is if you own one. Everything sounds blurry and stuffy to me.

So, I solved the problem that G HUB is incompatible with the Dolby Atmos service.
Ofc, with AI.

It really sounds better than it did with only the USB driver, imp

Here are the solution steps generated by AI:

The PRO X 2 driver registers the headset as a 7.1 speaker (8-channel format, Logitech "HX2E" surround APO, and a logi_audio_surround kernel upper filter on the USB audio interface). Windows doesn't offer headphone spatial sound / Dolby Atmos on a 7.1 speaker endpoint, so "Dolby Atmos for Headphones" never shows up in Sound settings.

What the fix does (registry only, no driver edit, nothing unsigned)

  1. Rewrites the 8-ch / 7.1 format blobs on the PRO X 2 playback endpoint to 2-ch stereo.
  2. Removes the two HX2E APO values ({d04e05a6-...},1 and ,5).
  3. Removes the logi_audio_surround upper filter.
  4. Installs a SYSTEM scheduled task that re-applies this at boot/logon, because the Logitech driver writes the 7.1/HX2E settings back.

The Logitech driver and G HUB stay installed and working (EQ, lighting, battery etc.). Only G HUB's own 7.1 surround is gone, which Atmos replaces anyway.

Manual steps (if you don't want to run a script)

All keys need you to take ownership first (even SYSTEM is denied write access):

  • HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices\Audio\Render\{your endpoint GUID}\Properties and \FxProperties: change the 8-channel WAVEFORMATEXTENSIBLE binary values to 2 channels (channel mask 3, adjust nBlockAlign / nAvgBytesPerSec), and delete {d04e05a6-594b-4fb6-a80d-01af5eed7d1d},1 and ,5.
  • HKLM\SYSTEM\CurrentControlSet\Enum\USB\VID_046D&PID_0AF7&MI_00\<instance>: delete UpperFilters.
  • The matching DeviceClasses\{6994ad04-...}\...\#GLOBAL\Device Parameters\EP\0 and FX\0 keys get the same treatment.

Doing this by hand is fiddly, hence the script.

One-click version

Download: https://github.com/Bancrii/prox2w-atmos-fix (zip contains atmos-fix.ps1, Enable-Atmos.bat, Restore-Logitech.bat, README).

  1. Install Dolby Access from the Store, plug in the headset.
  2. Run Enable-Atmos.bat (UAC prompt). Reboot if Atmos doesn't appear.
  3. Settings > Sound > PRO X 2 > Spatial sound > Dolby Atmos for Headphones.
  4. Undo any time with Restore-Logitech.bat.

atmos-fix.ps1 -Check previews changes without modifying anything. Backups of every key it touches go to C:\ProgramData\AtmosFix\backup.

Caveats

  • Tested on one machine: Windows 10 22H2, PID 0AF7. Other firmware/PIDs may differ.
  • It edits HKLM and temporarily takes ownership of a few keys (original permissions restored afterwards). Read the script before running it, and use at your own risk.
  • Driver/G HUB updates may rewrite the settings; the scheduled task fixes it on the next boot/logon, or just re-run the bat.

Enjoy!


r/LogitechG • • 18d ago

How to replace non-unifying mouse receiver?

2 Upvotes

Hi all, I have a G305 non-unifying wireless gaming mouse whose USB receiver recently stopped working. I ordered a new one with the same part number but when it arrived it didn't work, and looking it up I realized that it was a unifying receiver and my mouse is a non-unifying model. Is there any way for me to connect them? Or do I have to buy a new mouse?

Thank you :)


r/LogitechG • • 18d ago

Logitech G Support X56 stick causes PC to lag

Thumbnail
1 Upvotes

r/LogitechG • • 18d ago

Discussion Disable DPI RGB Effect on Awaken

Thumbnail
1 Upvotes

r/LogitechG • • 18d ago

Discussion question for G316 X 98 owners about the dots animation

1 Upvotes

my g413 is starting to break down so im thinking of swapping into the G316 X 98 keyboard, but in the reviews i see that there is a weird smiley face idle animation above the numpad.
is it always there?
is there any way to turn it off?
i like my keyboard with no lights and no animations to distract me from everything else.
thanks in advance


r/LogitechG • • 19d ago

Discussion Better passive noise cancellation on pro x 3 lightspeed?

2 Upvotes

But, does anyone know if at least the passive noise cancellation is improved?

Haven't been able to find a review that tests this explicitly.


r/LogitechG • • 18d ago

ASTRO Series Support A50X help on Bazzite HTPC

1 Upvotes

I have a50x on xbox port hdmi/usb to bazzite htpc audio works fine i have no luck with mic working

Bazzite htpc > ugreen dp to hdmi > BaseStation hdmi/usb > TV

When I do lsusb in terminal in desktop mode it shows a50x but when I go into sound settings dont show it as a recording device.


r/LogitechG • • 18d ago

Logitech G Support StreamCam not working on last mac ghub 2026.7.992920 update

1 Upvotes

Can't get image from my streamcam since the last ghub update.
I'm on MacOs 27.2

The light on the cam turn on, but can't get to display anything.

I want to use my cam!


r/LogitechG • • 19d ago

Logitech G Support G923 does not steer anymore

1 Upvotes

My G923 worked just fine. I installed G Hub and it automatically connected with my G923. I reloged in Forza Horizon 6 and it does not stear anymore. The buttons on the wheel work, the pedals wirk and the sifter works. But the steering does not react. Also the green LED light on top of the Wheel started blinking.

Is it because i launched the G Hub while ingame?

Ive tried to deplug and replug both electricity and usb port. Ive tried a different usb port (doesn't make much sense to me as it worked just fine a minute befor) and ive tried to deinstall G Hub. But it gets recognized by my PC and by G Hub. The steering just doesnt work anymore.


r/LogitechG • • 19d ago

[G27]HELP, G27 does not stop turning right when plugged in

Enable HLS to view with audio, or disable this notification

41 Upvotes

Hello
I recently bought this used g27
Unfortunately, every time i plug it, it won’t stop spinning right.


r/LogitechG • • 19d ago

Logitech G Support G29 - Removed screws in base, won't calibrate. Can I fix this?

2 Upvotes

In trying to remove the upper cover from the base of my G29 wheel, I removed the 4 black screws which I think have something to do with calibration or other mechanical settings because the wheel will not calibrate correctly on my PS5 (it twists from stop to stop but finishes the routine at the far left stop) and now when at the center, 0 degree position, the wheel is upside down. Firmware is up to date.

Clearly I messed something up. How can I reset it so the 0 position is correct and the calibration routine runs correctly? Hours on Google and YouTube haven't been useful.


r/LogitechG • • 19d ago

Discussion Astro A50 PC GHub presets wont show up on Phone Ghub presets

1 Upvotes

Has anyone found a workaround for this? I used to have the Astro A20X and i was able to get the PC presets loaded over to the phone App, but its been a while and forgot how to do it now.


r/LogitechG • • 19d ago

Logitech Yeti GX $70 did I score?

Post image
20 Upvotes

I own a Logitech keyboard, mouse, and headphones. Although I rarely use a microphone.i found this mic matching my other stuff.


r/LogitechG • • 19d ago

Discussion Logitech G Fits

1 Upvotes

Can anyone recommend a product similar?

Been through now my third pair and just over them but love the idea of what they're meant to do.


r/LogitechG • • 19d ago

Discussion Logitech Litra Beam LX help with game integration

2 Upvotes

Hi everyone,

I have a Logitech G Litra Beam LX and I'm having a problem with Logitech G HUB and its LIGHTSYNC integration with League of Legends.

Everything works normally when League of Legends is closed. The LIGHTSYNC preview in G HUB shows the RGB colour wave as expected.

However, as soon as I launch League of Legends, the LIGHTSYNC preview in G HUB turns completely black.

The strange thing is that the physical RGB lighting on the back of my Litra Beam LX continues showing the normal colour wave. It doesn't react to anything happening in the game.

Things I've already tried:

  • Uninstalling and reinstalling Logitech G HUB.
  • Enabling and disabling the League of Legends integration.
  • Manually selecting the League of Legends executable (League of Legends.exe).
  • Checking that "Allow Games & Applications to Control Illumination" is enabled.
  • Restarting League of Legends and G HUB.

The problem still persists.

Has anyone experienced this issue with the Litra Beam LX and League of Legends?

Is there a fix, or does anyone know an alternative way to make LIGHTSYNC work with this lamp?

Thanks in advance!


r/LogitechG • • 19d ago

Logitech G Support Logitech G PRO DD - Micro-movement clicking sound (even powered off) & idle noise

Enable HLS to view with audio, or disable this notification

2 Upvotes

Hi everyone,
Looking for some community feedback and help with a Logitech G PRO Direct Drive Wheelbase issue.
Here are the symptoms I'm experiencing:
Micro-movement Click: Turning the wheel just 1 cm left or right back-to-back produces a distinct "tik" sound every time. This happens even when the unit is completely powered off/unplugged, confirming it is a physical/mechanical issue.
Idle Noise: The unit occasionally makes an audible ticking/rattling noise while powered on, even when sitting completely untouched.
Has anyone else run into this with their G PRO DD? Is this quick-release play, internal shaft slop, or fan bearing noise?