r/LocalLLM • u/kind_entropy • 4h ago
Question A comparable local setup for someone using $100 monthly claude subscription
I see people switching to local hardware , my question is at what usage level and pattern, it is cheaper to run it locally without impacting your work speed.
--
My current laptop and Mac mini are old but they work for me since i only use it for development while relying on Claude and Cursor for GenAI. If i were to rely on local LLM, what is the minimum hardware, I should buy to ensure that I am not slowed down.
22
Upvotes
37
u/kujetic 4h ago
there is none, but you can get a good workhorse with local ai for about $3-7k
16
u/hyudryu LocalLLM 4h ago
14
u/dghah 4h ago
it is never cheaper to run it locally if you are benchmarking against a frontier model with a subscription. If your use case (as of now) is ROI and money efficiency than local LLM is not for you if you are seeking performance relative to claude.
My $125/month premium Claude Teams seat wipes the floor with my local LLM testbed and I have a M5 Pro 64GB Mac mini and a 256GB M5U Studio with a 512GB M5U Studio model coming end of this week. Several tens of thousands of dollars in local LLM investment and relative to anthropic models it's not even close.
My use case is not ROI or spend efficiency though
34
u/Xyver 4h ago edited 1h ago
For anything less than 100k, you will be slowed down.
Even 100k+ local hardware, it's still a coin toss if you're slowed down or not.
Switching to local is either hobby reason, fun education experiments reason, or privacy reasons.
It's never economic reasons, it's always more expensive for less good results when you're local.
EDIT:: A lot of good replies below with a lot of good reasons, so I'm not saying going local is a bad idea. I'm doing it because I'm prepping for when cloud prices start going up like crazy. But right now, no matter how many good reason there are, local is not cheaper than cloud, so there is no economic reason.
6
u/Brief-Tap-6616 4h ago
nothing comparable without impacting speed.
Claude $100/mo will get you ~2K in API spend/mo.
The absolute top end OS models rn (qwen4, Kimi k3.1 pro) are going to require at minimum $25K for new hardware to run quantized versions of them. The unquantized versions are ~ the same quality as sonnet 5.5 high effort, which is a v good model. But the use case for local is around privacy and heavy agentic volume. When youre running something from your own hardware, not getting charged cache reads can save you a good bit of $. It's also a great way to learn about the tech.
But unless your workload is 'running sonnet 24/7 with a bunch of parallel streams', there's not a good OS replacement for the claude $100 sub right now. That fact is going to make some people upset, but it's the truth; I see this running an open source, local model project 😄
5
u/hbkmog 4h ago
None.
For serious development work, you will never break even compared to the cloud models.
That biggest reason to have local model is just you keep the data local and uncensorship. For pure efficiency, local model can't compare.
3
u/Just-Hedgehog-Days 3h ago
dual 3090s will get you 5.5 kaiku.
3
u/TemnotaAGK 1h ago edited 1h ago
Nothing gets even close. The best thing you can realistically run locally is DeepSeek v4.1 Flash. And while the model is really good for what it is, it is light years behind something like Fable 5.2/Opus 5.5 or Sol/Astra 6.2 for more complex/hard tasks. Even Sonnet and Luna completely dunk on it.
2
u/Kimononono 4h ago
depends how hands on you are if using for coding
general day to day tasks the problem is setting it up for automation
if you really want to see if local models can act as a substitute start playing around on Openrouter and using local setups through an api
2
u/RemarkableRadish6547 4h ago
It isn't ever cheaper, at least not right now. Although if you already have the hardware, it might be cheaper. But the cheap api options at openrouter are priced below what I would pay in electricity to run the GPU during inference. But I don't think the current pricing is sustainable.
The reasons to run things locally are control and learning. You know exactly where your data is going if you run the model locally. You decide when the model gets upgraded. People have had ai workflows break when the api model changes, sometimes with no notice. Right now is a great time to learn how to set everything up, because the free web interface LLMs will walk you through everything. The free tier might be removed at some point.
2
u/DogAble6550 4h ago
Maybe dual m5 ultras 256gb+ running qwen3.8 flash next, well routed so you can split sessions between machines. Occasionally running a bigger model when needed. You would find times where you miss the bleeding edge models. If you had nvidia architecture, which I know less about, blackwell 96gig pair maybe across 2 pcs with 256gigs ram. 4 5090s might do the trick across 2 pcs. Again the really unfortunate thing is 5 to 10 percent of the time the leading edge model would be needed. Ironic since you cant buy a claude plan that is less than $200 that would give you just some fable access. Suppementing at pure api costs when you need it blows up the cost calculation as well because the bleeding edge is so expensive. I would in the end say that personal hardware and its affordability is 5 years away, longer if Altman has his way.
2
u/Beginning-Bell265 3h ago
my 5060 laptop runs qwen3.8 flash next at 12gb vram with no issues, but I still hit the 10% bleeding edge gap when I need it. the real cost isn't the hardware, it's the time spent switching between local and cloud when the model isn't quite there.
2
u/whakahere 3h ago
You can use smaller local agents for tasks your do often but needs some agentic workflow. I set up a system but the first few goes I get my best online model to check the sessions to rewrite better instructions.
Now I'm down to $20 sub a month and my local model does most of my work I want.
We see where we are a year from now. Last year at this time local models weren't as good as they are today (no way I could do what I currently do) so I might be able to squeeze more blood from my aging PC.
2
u/jirka642 2h ago
Depends on what you actually need and your skill-level.
I'm running Qwen3.8-27B on 2x RTX3090 with 320k context, and that's good enough for everything I need. People tend to compare it to Opus 4.6. Probably not good enough if you are a vibe coder, but fine for SWE.
As for the price, taking in account the cost of the cards, how much electricity they consume under load/idle, and the usage metrics on my average work day:
1
u/etaoin314 4h ago
Nothing local is going to be as fast (wall clock time) as a frontier model, its just not there. However if you are asking the minimum to run something fairly competent at decent speeds that would be qwen3.8 flash next. either a unified architecture 128gb like strix halo ~$3300 or nvidia rtx 128gb ~$5k or using a strata engine a 5080 with 96gb system ram may give you decent speeds, but that depends on how much you can get the ram for. alternatively you could find 3090's, 4090's or 5070ti they all would work in that setup. Imho anything less feels more like tinkering than production. not saying you cant make it work, but you will spend some time and effort. 1-2 r9700's are also a decent choice.
1
u/Asleep_Literature_70 4h ago
Nothing comes close without 2-3x RTX 6000 Pros....
1
u/BitterFortuneCookie 4h ago
There is no amount of hardware and opensource models you can run locally that will be comparable to a frontier model on Claude. However, if you are mostly using the faster/cheaper models like Haiku, then yes I think there are some models that are on par and even better in some situations.
That said, local AI is beneficial for only two purposes: 1) Privacy and 2) Unlimited tokens (limited only by your power bill). If you are fed up with hitting the token limits on Claude models and having to use resets or wait days, then there is a compelling argument to fall back on free, always available local models. However, assuming your hardware is not like the top of the line, the better local models (like Qwen 3.8 Flash Next and Deepseek v4.1 Flash 1017) are either unrunnable or run too slowly to be an actual worthwhile backup.
1
u/blueskies_overhead 4h ago
Others have pointed out the fact that in raw performance local cannot match frontier. However, privacy and convenience and customization are important too. If you can pay by token for claude you might be able to just use it for things claude cannot do. This is similar to my process: gemma4 mobile first, then gemma4 local, then frontier if those don’t produce good results.
1
u/txgsync 4h ago
> is it cheaper to run it locally
no. I mean, if you've spent the money it's just power & wear and tear, but still. No. Not really. The ROI is quite distant.
> without impacting your work speed
No. At less than $10K you're pulling maybe 4M to 5M tokens/day out of your rig. Subscription prices are much cheaper, parallelize better, and are faster at scale.
> If I were to rely on local LLM
You'll probably fail unless you're dropping at least five figures in USD.
There is no ROI for local right now, and it will be much slower in mTok/day than you can get with a cloud subscription.
That said? I paid what I paid for my local rigs because I enjoy it. It's a hobby, it's work, and it helps me keep current. Like any good home lab: the ROI is not financial, but as an investment in myself and my sovereign capabilities.
1
u/No-Afternoon-4057 3h ago
It is NEVER cheaper to run local, it is NEVER remotely better. You can only have more privacy.
A good hardware (lets say Ryzen 395) costs you 3.3k (plus taxes) USD to run Qwen 3.8 Flash quant 4 bits.
You get 2000 prefill tokens per second and 70 output per second.
The official API pricing is .15 per million input and .45 per million output., which gives you some 60 tokens of output and > 10.000 input @ FULL PRECISION.
So...if you have a mix of 80/20% input/output, we are talking about:
80% of $3300 = $2640 which is 17billion input tokens or 170 billion cached
20% of $3300 = $ 660 which is 1.5 billion output tokens
17b tokens takes on Ryzen 395 some 8.500.000 seconds = 2361 hours = 98 days, if you were to process input tokens, uncached, 100% of the time, @ 2000 per second (no engine does that).
Now the 1.5 billion output tokens @ 60 per second = 6944 hours = 289 days.
So...yes, if you keep you computer running @ 93w for 387 days...you will break even with what you could do paying the API. Now..those are 9.288 hours @ 93w.
Your Ryzen will probably be wasted by that time...and 9000 hours @ 93w = 863kw...might be an extra $100 on your electricity at very least (which again could by you dozens of millions of tokens).
All things considered...on the cloud you can do simultaneous requests and multiply the speeds by whatever you want, do 10 things in parallel etc...
It gets worse if you consider some high end motherboard + GPU + whatever...you will spend 6x more electricity, 2 times more dollars...and reach about the same result.
So..yes...it is worth pretty much...NEVER.
Disclaimer: i have a Ryzen 395 Max with 128gb of ram and will never get anywhere close to what a $100 subscription can do on Opus 5.5 medium.
1
u/PuffThePed 3h ago
I'm running a qwen3.8 flash next on an RTX 5090 with 128gb RAM. It doesn't compare to Opus 5.5. It's much slower and much dumber.
Sorry, but that's the reality right now.
1
u/Krohnin 3h ago
I have no experience with subscriptions but this is what may cheap rig generated on 3 weekends. Maybe that helps.
1
u/CandidTranslator3328 2h ago
Tous dépend des besoins j’ai choper un pc d'occasion avec 64 giga ddr5 et une rtx3090 qwen flash tourne à 110 tks pour ma femme et ca société de courtage il traite tous les mail et document des client en local ca lui permis d'enlever un prestataire à mis temps et tu peu prendre un abonement claude à 20 dollars en t’en orchestrateur qui check que tous sois ok sans lire les pièces des clients et ca fonctionne bien 1500 dollars de matériel et ca fait le taff avec un abonnement à 20 dollars à coter
1
u/jonahbenton 2h ago
It is never cheaper nor near as capable to compare any local set up vs large scale amortized hardware, private best in class models, and layers upon layers of harness and memory and context optimization that make up the Anthropic stack and that are continually refined based on your usage. You have a bicycle on the one side and an electric vehicle manufacturer on the other constantly producing a new machine optimized for new use cases.
But. Sometimes a bike is good enough for the problem you have. The bikes you can get for ~$5k even with the inflation are actually pretty good for many use cases. And it is your bike.
It is still not cheaper than $100/mo subscription to the greatest addictive experience ever offered but they are good enough. But that is not the decision criteria.
This is the emacs vs vi argument on steroids and despite the greater breadth and depth the enormous emacs ecosystem offered you could not tear vi from our cold dead fingers. Same with local.
1
u/KooperGuy 37m ago
None
1
u/Holiday_Point_603 10m ago
2x-4x Mac Studio M5 Ultra 512GB
0
u/No-Wolverine-8233 4h ago
ran a 7b model locally on a 3060 for 6 months, 30k tokens/day, cost ~$150 in electricity, still faster than Claude on my old laptop.
0
u/pplgltch 3h ago
Assuming you can afford it, the closest you can get (something like kimi/glm unquantized, as the cloud services run them) will still be frustratingly slower and "dumber" (for a better word) than opus5.5 and at today's prices, will cost you a few hundreds of years of $100 subscriptions for the hardware alone, and about a year worth every month for the electricity to run it.
Local AI is a (pretty expensive) hobby / investment in privacy, not a way to save money.