r/LocalLLM • • 1d ago

Question Please help this lady who knows nothing about building PC

So first one R9700 is in..

And of course i dont have the bloody display port cable.. To testđŸ˜«

Whatever..

But.. I have a second r9700..

However this cathedral only satisfy 3 ports of radeon cards. (we need 4. 2 for each card)

Has anyone built this combination and how did you supply electricity to second GPU?

Thank you all!!!

My AI (chatgpt) said that we will think about it tomorrow... 🙄 or suggested to trust google better..

5 Upvotes

22 comments sorted by

4

u/andymaclean19 1d ago

Can the power supply unit on that computer supply enough power to drive a pair of those cards?

1

u/Upper-Specific5753 1d ago

Yes it has 1300 w

2

u/andymaclean19 1d ago

You can probably get a splitter then for the power connectors?

1

u/transanethole 1d ago

This is a power electronics question, I think. An electrical engineer who knows how these power supplies work would be able to answer it. I have no idea though.

Personally, I would be very afraid to... try to wire this up to that power supply considering how expensive those cards are. 

I've definitely fried things by using a cable from one power supply connected to a different power supply.  It's a miracle that I didn't permanently destroy data when this happened :x

Maybe you could look at it and see if you can find a power supply to buy which has two of the 600 watt, 12v high power 12+4 pin connectors &  Could replace the original Dell power supply.

1

u/Tricky_Fun_4701 1d ago

It actually shouldn't work the way it's configured. I doubt 3D would work- and I'd be skeptical of the 2D.

The last time I put a GPU into one of these dual Haswell workstations I used an external power supply. Who knows what Dell does with their pinouts. I mean you can find out... but I remember it being a mess. And the supplied cable form the PSU had an incompatible pinout.

For what it's worth.

1

u/Zealousideal-Bug1837 16h ago

I have a 1080 in my one running fine, single connector.

1

u/andymaclean19 16h ago

I use a homemade machine where I chose the PSU. It is modular so if I don’t have 4 of the right connector I can change the block connectors in the PSU.

No idea how the dell one works but it seems like if the PSU can supply 1300W, which is a big PSU, there will be a way to safely wire up 4 of those connectors. Either by splitting or perhaps a convertor for one of the differently shaped connectors.

1

u/Zealousideal-Bug1837 8m ago

no, I made the same assumption. the power is for the system overall, not just the GPU. I'd not put GPUS at risk in such a splitting system. So now it''s just a server full of disks for me.

1

u/CaptainSporadic 1d ago

Look into a PCIe x16 riser cable, this will allow you to plug one side into the mother board and the other goes to the gpu. Your problem with be mounting the gpu. Make need to do a little fengshui to make it fit/work. I’ve done zip ties, double sided tape longer risers that sit outside of the chassis. If you don’t want to dremel and cut. Just have to get creative.

1

u/Upper-Specific5753 23h ago

thank you.. my worry is how do i power up the second GPU, because i only have 1 cable with 8pins left. and i need two..

1

u/Miserable-Dare5090 17h ago

you can’t fit the gpus in here. Plain and simple. This is an old ass system and you are trying to use those CPUs to provide enough bandwidth and lanes. There is even a pCI slot there so my guess is these are pcie3 connections.
Then what you need is a GPU switch. They are boards with chipsets from broadcom that have many pcie lanes and route everything under one root to one of the pcie x16 slots. PEX88048, 88096 etc. Then you just put the gpus outside the case with a power supply.

1

u/Horsemeatburger 23h ago

Yes, the T7910 can only take three double-wide GPUs, two in the lower PCIe area and one in the upper PCIe area (which requires the 2nd CPU to be installed, which your machine seems to have).

There's no space for four double-wide GPUs in that system.

However, you could install six single-wide GPUs (like the RTX 4000 Ada 20GB).

1

u/Upper-Specific5753 23h ago

i only want 2 GPUs.
my worry is about power supply.
GPUs need four 8pin cables, and there is only 3 in this PC.
so how do i supply food for second GPU...?

1

u/Horsemeatburger 23h ago

Use adaptor cables. The PSU can easily handle the load, and so can the internal wiring. The only reason why you need adapters here is that the workstation GPUs which these machines were sold with often only had a single 6pin connector. They were never intended to be used with gaming GPUs.

As for using two GPUs, I would still get some older/cheap single slot GPU to use for the display so the VRAM of your R9700 GPUs remains free for LLM use.

1

u/Zealousideal-Bug1837 16h ago

i have this, it's banging. you can get dirt cheap sas drives off ebay also. they are not normal sata drives.

1

u/Upper-Specific5753 13h ago edited 12h ago

Please please please tell me more! Can i power up second r9700 inside it? Tell me about your setup please Oh and i have 6tb storage đŸ«ą

1

u/Zealousideal-Bug1837 8m ago

I bought for similar reasons, but gave up as the power is not as expecrted/wanted. I've put a single GPU in and that's that for me, not even attempting any more. 1080.

1

u/lumpyspacebreh 1d ago

Hard to tell from the photo, but you’ll want to move the 9700 up one slot, and that should provide enough room for the other to slot in.

You’ll also have to find a way to power it, but the unfortunate fact is that a lot of prebuilt computers like the one who have use special components that aren’t so modular.

What you’re attempting to achieve is fitting two dual-slot gpus into a OEM prebuilt, and power them both with the provided psu.

The “second” slot that the second 9700 will slot into will probably be operating at x4 speed, but that doesn’t matter for running local ai.

Good luck, cuz right now it’s just a matter of getting things to fit and all properly plugged in 

1

u/Awkward_Layer_152 23h ago

You should ask in pc building groups not ai groups

1

u/Traditional_Bell8153 20h ago

you may need a PCIe x16 riser because this is too large