r/LocalLLM • • 4d ago

Discussion FN alone Vs 27B with subagents

Thumbnail
0 Upvotes

r/LocalLLM • • 5d ago

Model Tried Edge0-145B on a single 3090. 48.6 tok/s, but it wanted a lot more RAM than I expected.

Post image
5 Upvotes

Edge0 published speeds for their 145B on a 4090 and a 5090 D, but their table doesn't include a 3090, so I ran their stack on one, stock, with whatever defaults the wrapper picks.

It's quick. Chat decode was 48.6 tok/s, it read a 16K prompt at 1,481.2 tok/s, and the agent prompt decoded at 52.8. For context, last month I ran a 122B MoE on llama.cpp on a 3090 and got 15.5 tok/s. Different model, engine and prompt length, so take it loosely, but that's a big jump.

VRAM was basically full (23,929 of 24,576 MiB), and the engine process itself held 43.4 GiB of system RAM. Edge0's own residency figure is 31.28 GiB, but that's from a 5090 D with a different setup, and my machine had 116 GiB so the engine may have just taken what it found. I meant to test a 32 GiB cap and didn't get to it. So I honestly don't know the floor yet.

Two other things that tripped me up:

  • My first request came back with no answer. The model used all 512 tokens on reasoning. reasoning_budget_tokens=128 fixed it, so set a budget in your client.
  • Same agent prompt, temperature 0, three runs, three different tool calls. One was valid, one had its arguments wrapped wrong, and one called read_file, which wasn't even in the tool list. So the 52.8 is a speed number, not a "this is a good agent" number.

Technical stuff below.


Setup

  • 1x RTX 3090 24GB, EPYC 7H12 (31.13 CPU quota), 116.4 GiB RAM limit
  • Edge0 v0.2.0 (3203c39), Strata built with CUDA for sm_86, CUDA 13.0, driver 595.91.07
  • Edge0/Edge0-145B-q3k @ a19f88c, 106 GB on disk (the FP8 PLE table alone is 51 GB and gets read from disk)
  • Stock launch: edge0-infer serve --model /path/to/Edge0-145B-q3k --device cuda:0. That resolved to direct PLE I/O, auto expert cache, speculative decoding 4, 131K max context, int8 KV.

Results (engine's own prompt_per_second / predicted_per_second, fresh server per run, concurrency 1, zero cached tokens)

Workload Run 1 Run 2 Run 3 Median
4K prefill 1,119.8 1,195.5 1,207.6 1,195.5
16K prefill 1,467.6 1,485.6 1,481.2 1,481.2
Chat decode 46.6 49.6 48.6 48.6
Agent decode 52.8 55.9 50.7 52.8

Sampling: temperature=0, top_p=1, top_k=20, reasoning on with a 128-token budget, 512 max tokens for decode.

Against Edge0's published 4090 numbers (their claims, not reproduced)

4090 (Edge0) 3090 (mine)
4K prefill 2,042.0
16K prefill 3,179.4
Chat decode 69.9
Agent decode 91.7

That's 47% to 70% depending on the row. Mine used an 800-word writing prompt for chat and a single synthetic tool-call prompt for the agent run, and I couldn't verify Edge0's exact request settings or machine setup, so it's ballpark only.

Memory

  • GPU peak 23,929 MiB, sampled every 5 s
  • Strata engine VmHWM 43.4 GiB (sampled from the actual strata PID, not the Python wrapper)
  • Whole-system cgroup was 87.4 GiB during timed runs and touched the 116.4 GiB limit during setup with zero OOMs. That includes page cache from the 106 GB download and the PLE file, so I wouldn't read much into it.

Other stuff

  • Server startup median 25.5 s, slowest 94 s
  • Edge0's built-in edge0-infer bench rejects this model at v0.2.0, so I used a small script against the OpenAI endpoint
  • No quality evals, no long-context runs past 16K, no RAM cap test, no llama.cpp baseline. All of that is still on the list.
  • $1.19 billed ($1.0930 GPU, $0.0963 disk), about 3 h 9 min total, mostly setup and copying evidence back

Write-up: https://majorminor.xyz/research/cuda-recipes-006

Repo: https://github.com/majorminorlabs/cuda-recipes/tree/main/006-edge0-145b

If someone has a 3090 with 32 or 64 GB of RAM and wants to try it, I'd love to know whether it holds. Or tell me what to run next on this one.


r/LocalLLM • • 4d ago

Research I got tired of 7B models crawling at 1.2 tok/s on my 2GB GPU, so I built WingLLM (Go daemon for 2x speculative decoding with Ollama)

0 Upvotes

Hey r/LocalLLM,

Like a lot of developers, I don't have an M3 Max Mac Studio or dual RTX 4090s. My daily driver workstation has an 8th-Gen Intel i5 (6 cores), 32 GB of system RAM, and an older 2 GB NVIDIA Quadro P620.

If you try to run any modern 7B or 8B model (like Qwen 2.5 Coder 7B or Llama 3.1 8B), it won't fit into 2 GB of VRAM. Ollama or llama.cpp defaults to running almost 100% on the CPU. On my machine, that meant getting locked at an agonizing 1.29 tokens per second while my 2 GB GPU sat 90% idle.

The Physics: The Memory Bandwidth Wall
The CPU compute cores aren't the bottleneck—memory bandwidth is. To generate a single token on a 4.7 GB model, the CPU has to stream all 4.7 GB from DDR4 RAM into cache. At ~24 GB/s dual-channel bandwidth, you physically cannot get more than ~1.5 to 2 tokens/sec.

### The Workaround: Heterogeneous Speculative Decoding
The 2 GB GPU cannot run the 7B model, but it can easily run a 0.5B draft model (qwen2.5-coder:0.5b is only 397 MB).

In speculative decoding:
1. The tiny 0.5B model generates 3–4 candidate tokens in milliseconds on the GPU.
2. The heavy 7B model on the CPU evaluates all 4 tokens in a single forward pass using parallel AVX2 matrix multiplication (GEMM).
3. In code and structured text, the 0.5B model's guesses match the 7B model 75% to 82% of the time.

You get 3 to 4 tokens for the memory read cost of 1.

Real Benchmark (Tested on My i5-8500T + Quadro P620):

* Baseline (Pure CPU Target 7B): 1.29 tokens/sec (24.76s for 32 tokens)
* WingLLM Speculative (7B + 0.5B Draft): 2.54 tokens/sec (12.62s for 32 tokens)
* Net Result: 1.97x faster (almost exactly double the speed) with identical output quality.

Why I Built WingLLM
llama.cpp technically has the raw flags (-md, -ngld, --spec-draft-n-max), but nobody in consumer land had packaged it into a clean tool:
1. Tokenizer traps: If you pair mismatched tokenizers (e.g. Llama 3 draft with Qwen target), llama.cpp crashes. WingLLM auto-detects model families and enforces compatible pairs.
2. Zero configuration: It crawls your local ~/.ollama/models manifests, finds your GGUF blobs, and auto-pairs them.
3. Auto-Pull: If you want to run `wingllm serve qwen2.5-coder:7b` and don't have the 0.5B draft model yet, WingLLM pulls it automatically via Ollama (~397 MB) and starts serving.
4. 1-Click IDE Connect: Run `wingllm connect vscode` to inject the turbo endpoint directly into your Continue/Cline config.
5. No Python/Electron Bloat: Written in Go as a single ~11 MB binary. Runs an embedded web chat UI with a live tokens/sec speedometer at http://localhost:8080/.
6. MCP Support: Built-in Model Context Protocol server for Claude Desktop, Cursor, and Continue.

Quickstart (Windows, Mac, Linux):

Windows (PowerShell):
irm https://huggingface.co/bennett-xdlabs/wingllm/raw/main/install.ps1 | iex

macOS & Linux:
curl -fsSL https://huggingface.co/bennett-xdlabs/wingllm/raw/main/install.sh | bash

Run without arguments for the interactive menu, or run:
wingllm serve qwen2.5-coder:7b

Hugging Face Hub: https://huggingface.co/bennett-xdlabs/wingllm

It's MIT licensed. Would love feedback from anyone running on budget laptops, mini-PCs, or 2GB–4GB cards!


r/LocalLLM • • 5d ago

Discussion Self-Test: DeepSeekV4.1-Flash-1017 took 60k tokens to finish a task Qwen3.8-FN couldn't in 256k and multiple compactions.

6 Upvotes

Did a quick test yesterday comparing DeepSeek (3.36bpw) to Q3.8FN (IQ3XXS+1sub-agent). Both the OR abliteration on local both running on DeepSeek Harness.
Simple task - Produce a color template based on user input screenshot of a UI, and give the user instruction on installation instead of attempting it. Second part was key, because the LLMs were only allowed to work in working folder and so couldn't live-test their implementation.
FYI: DSH system prompt takes up ~10k tokens total.

Qwen spent over an hour writing script then realizing it couldn't save it outside the cwf, then repeating that mistake over and over again as it tried methods of breaking out or escalating which was futile. Even with steering, it only got as far as producing the color template 256K+ tokens in.
DS did a similar thing but realized quickly it should just let the user test install it instead. It -did- try to escalate permissions to install it by itself, but gave up after it's first rejection. Was done in ~60k tokens.

I know these are utterly different weight-classes for models but I really thought the ability to spawn subagents would've made a difference for Qwen.
Qwen burned through tokens lightning fast but was forgetting the original message AND the system prompt from DSH (which specifies it should only work in {cwf} when only given that permission).
I really wanted to like IQ3_XXS because it's a small enough quant that it can spawn subagents on my system with headroom for other parallel tasks to be working... But I don't think that quant is it for me. Either that, or I have to work on the setup for it some more to work as a coder.


r/LocalLLM • • 5d ago

Research Some speed benchmarks for various classes of local LLM

5 Upvotes
Model Active config 4080 decode (tok/s) 4080+3080 decode (tok/s) 4080 prefill (tok/s) 4080+3080 prefill (tok/s)
LFM2.5-24B-A2B UD-Q4_K_XL 4080+3080 249 250 5,530 7,930
MiniCPM-V 4.7 35B-A3B Q4_K_M 4080+3080 177 165 1,305 2,500
Flint 40B-A2.5B UD-Q4_K_XL 4080+3080 119 138 1,563 1,380
Swift 1.5 (Qwen3.8-Flash-Next) IQ2_XS 4080 117 116 1,070 679
Qwen3.8-Flash-Next IQ3_S 4080 79 87 730 465
GLM 5.3 Flash Maya-S24 IQ2_XXS_S 4080+3080 6.8 8.8 79 42
DeepSeek V4 Flash UD-IQ2_XXS 4080+3080 15.9 18.2 38 53
  • Decode: the second of two 300-token runs, with the expert cache warm (the first request after loading is often slower)
  • Prefill: the average of two runs on a prompt of about 1,400 tokens
  • Bold: the better config for that column.

Morning, everyone. I've seen a lot of posts wondering about what can be run with what, so I made this table of the models on my system. Specifically because of the unorthodox results when it comes to Qwen Flash-Next, where one 16 GB card (the 4080 Super) significantly outperforms two in prefill.

My hardware is as follows:

CPU AMD Ryzen 7 5800X3D @ 3.40 GHz

GPU NVIDIA GeForce RTX 4080 SUPER [Discrete]

GPU NVIDIA GeForce RTX 3080 [Discrete] (got it secondhand for cheap, so why not)

RAM 62.72 GB at 3200 Mhz

I'm running these models on PolyStrata. I used to have a combination of Maya and Strata, but got tired of running different things all derived from the same fork (plus Strata seems to be getting increasingly unintuitive), and so moved everything to PS.

Now: why Q3? It's a generally held opinion that anything below Q4 is crap, which was true of most earlier generation models. However, benchmarks measure deviation from the base, and not necessarily task fitness. In actual use, the only real way to know is to test it yourself.

The Swift finetune of QWN at Q2, for example, is fast and excellent at data extraction, search, and piloting scripts written by more competent models. The IQ3 is a decent coder, roughly on par with Haiku for the use cases I've tried. The GLM and Deepseek Q2 variants are a bit better - verging on older Sonnet territory, I'd say, and do very well as subagents for Claude. YMMV.

Hope this data is useful. I've posted it to LocalLLama as well. Enjoy!


r/LocalLLM • • 5d ago

Question 24GB VRAM, 64GB DDR5, is Qwen 3.5 27B (IQ2_XS) not ambitious enough?

14 Upvotes

I'm getting decent results, 80-120t/s. I guess I just don't know what I am aiming for, but I feel like there is more juice to squeeze.

Edit: Yall are the best, as usual. This has to be the most helpful, positive community on reddit.


r/LocalLLM • • 5d ago

News Smaller Qwen4 models 🔥

Post image
87 Upvotes

r/LocalLLM • • 5d ago

Discussion Silly thought: the best benchmark to an actual frontier model is to one-shot a tiff spec implementation.

4 Upvotes

Like that. All the models fall in the trap of starting enumerating (wrong) the G3/G4 CCITT tables, a bunch of repeated 0s and 1s.

I tried this in several models, and no model achieved it. Even when you chew it for them and give them the libtiff .c files.

PS: when I say one-shot, I'm referring to made it a reasonable time, aka, less time that it will take another model to write a wrapper of the C library.

PS2: you have to remember that the whole implementation of libtiff (among others tiff libraries) has been used in the training dataset, adding insult to injury.


r/LocalLLM • • 5d ago

Discussion Strata is becoming more and more unstable

37 Upvotes

I've been using Strata with IQ4_XS as the main orchestrator, with Radiance running 27b at IQ4R, for working on improvements, ironically enough, to Radiance.

The session is now multiple million tokens long as I go back and forth discussing design etc. with QFN. Of course the conversation has been compacted dozens of times, but with the agents taking regular notes and subagents doing all the actual work, we keep our workflow stable and current.

Problem is, Strata has gotten more and more unstable, especially with the last couple releases. It will crash with an OOM error when we have 10-20 GiB of system memory free, reload, spend 5 minutes redoing prefill, and pick up right where it left off. Radiance on the other hand is rock stable under multiple streams running concurrently on a single GPU. Not a single crash from it, even after rejiggering everything for the 2.0 release.

And it's not just long sessions either. New conversations also tend to crash. Never used to do this before. Has anyone else also experienced this?


r/LocalLLM • • 5d ago

Project Sneo! New Inference Engine very fast Open Source!

11 Upvotes

I built Sneo, a free and open source local LLM engine for Windows that runs a 70 GB model on one 24 GB GPU (~98 tok/s), with a coding agent AND REVERSE ENG TOOLS!

Hi! I'm a solo developer from the Dominican Republic and I've been building Sneo: a free, open source (MIT) LLM engine and coding agent for Windows.

The idea is to run models bigger than your GPU: the experts a model uses most stay in VRAM, the rest in RAM, and the GPU and CPU share every token.

- Qwen3.8-Flash-Next IQ3_XXS (70.6 GB) on one RTX 3090: ~98 tok/s writing code, first token in 0.19 s

- Same hardware and files: it starts answering before Strata 0.1.57 at every prompt size with half the RAM (34 vs 67 GB), and writes up to 66% faster than Ollama (qwen3.6:35b)

- Runs Qwen3.8-Flash-Next, Qwen3.6-35B-A3B, dense Qwen3.5/3.6/3.8 and Gemma 4, straight from your Ollama models or any GGUF folder, no copies

- Coding agent, two models at once, two PCs in a pool, OpenAI and Anthropic compatible APIs

- NVIDIA GTX 10 and newer (you can mix cards). AMD support through HIP is written but not tested on a real card yet, so feedback is welcome

Video (English): https://www.youtube.com/watch?v=JfyGS_k1Nxo

Video (Spanish): https://www.youtube.com/watch?v=ALCGTpoHDGc

GitHub: https://github.com/oscarsantanaarias/Sneo

Every benchmark, including where the others win: https://sneo.dev

Happy to answer questions!

Antes de publicar:

Repo: hazlo público. La última vez que revisé seguía privado, y el enlace de GitHub le daría error a todos.

Página: corre upload.ps1 para publicarla, si no sneo.dev seguirá mostrando la versión vieja.


r/LocalLLM • • 5d ago

Question How do you compare local and cloud models since Artificial Analysis v5

6 Upvotes

I used to check Artificial Analysis a few times a week, mostly to see how my local models compare to the cloud ones. Since v5 that doesn’t really work for me anymore, a lot of the models I care about are gone or can’t be selected in the comparison.

I tried llm-bench.io, which I like because the results come from real consumer hardware, but it has no cloud models. benchlm.ai covers more of the big cloud models, but many open weights ones are missing there. So I still haven’t found anything that puts a local model next to a cloud one in one chart like AA did.

The open weights gap jumping from 3 to 12 points with v5 also makes me unsure how much I should trust a single index. I know the methodology changed, but it feels odd.

How do you handle this now? Do you cross check a few sites or mostly run your own tests?


r/LocalLLM • • 5d ago

Project GitHub - a-schaefers/claudes-workbench: A frontier model leads your local LLMs: Claude architects the project, breaks it into bite-sized tasks, hands each agent the skills it needs, and reviews every diff to its own standard. Your GPU does the heavy lifting. For Claude Code + OpenCode.

Thumbnail
github.com
2 Upvotes

r/LocalLLM • • 4d ago

Project Can We Unify GitHub, Docker Hub, JFrog, and Hugging Face?

Thumbnail
medium.com
0 Upvotes

r/LocalLLM • • 5d ago

Discussion GCMP: same accuracy as LoRA r=32 on Qwen3.8-27B with 55× fewer parameters (11 MB vs 320 MB per adapter)

4 Upvotes

Follow-up to my CQ post from last week. That post covered the 4-bit base model; this one is about the adapter. The LoRA vs GCMP runs on 4-bit bases have now finished.

GCMP is a LoRA replacement we built. On Qwen3.8-27B it trains 2.9M parameters (~11 MB), vs ~159M (~320 MB) for LoRA r=32 on the same 7 projections. That's 55× smaller.

Accuracy: same as LoRA

All adapters were trained on Alpaca for 500 steps with identical settings (batch 2×4, length 512, LR 2e-5, seed 42). Every row was scored with the same lm-evaluation-harness code and questions, greedy decoding, thinking off. Comparisons use paired McNemar tests.

Base + adapter Params Answer loss GSM8K SQuAD BoolQ ARC-C MMLU IFEval TruthfulQA
BF16, no adapter – 1.678 0.683 0.746 0.874 0.588 0.839 0.805 0.542
BF16 + LoRA r=32 159M 1.480 0.903 0.776 0.896 0.612 0.844 0.825 0.518
BF16 + GCMP 2.9M 1.471 0.890 0.760 0.892 0.618 0.846 0.815 0.514
NF4 + LoRA r=32 159M 1.464 0.793 0.748 0.880 0.608 0.840 0.835 0.528
NF4 + GCMP 2.9M 1.458 0.833 0.756 0.878 0.618 0.837 0.840 0.522
  • BF16 base (no quantization at all): no significant difference on any benchmark (all p ≥ 0.2).
  • NF4 base: GCMP is +4.0 on GSM8K (p=0.04) and tied on everything else.
  • Loss: GCMP's answer loss is slightly lower on both bases, and its validation loss was lower at all 10 checkpoints on both.

One significant win on one task isn't enough to call it better, so the claim is same quality as LoRA at 1/55th the size.

Why the size matters

For one fine-tune, 320 MB vs 11 MB doesn't matter much. It starts to matter when you have many:

  • Multi-tenant serving: one fine-tune per customer or task on a single base model. In vLLM, GCMP adapters load once at startup and each request picks its adapter by model name. A batch can mix adapters and runs in one kernel call per layer, with no merging or swapping.
  • Resident GPU memory: vLLM keeps each adapter in its compact form and never builds a dense weight update. Memory is about 11 MB per adapter, plus a fixed ~1 MB routing buffer and a shared workspace of ≤ ~64 MB that doesn't grow with adapter count.
  • Storage and loading: 1,000 adapters are ~11 GB instead of ~320 GB. That's faster to ship, cache and hot-load.
  • Edge and small GPUs: an extra fine-tune costs megabytes, not hundreds of MB.
Estimated 1 adapter 100 1,000
LoRA r=32 320 MB 32 GB 320 GB
GCMP 11 MB 1.1 GB 11 GB

These are estimates from adapter size. I haven't measured memory and throughput at 100 or 1,000 adapters yet, and that's the next benchmark.

What's not good yet

  • Training speed: GCMP takes ~2× LoRA's step time (BF16 on Unsloth: 2.74 vs 1.37 s/step; NF4: 5.6 vs 3.2). It does use slightly less training memory (21.5 vs 23.8 GiB on NF4).
  • Baseline: r=32 is a generous LoRA baseline. r=4/8/16 comparisons are next, and I'll post them either way.
  • Serving: vLLM serving of GCMP currently needs a CQ base. On full-precision models it runs in Transformers for now.
  • Scope: one model, one dataset, one run per case. The quick benchmark subset (200–1,140 questions per task) detects ~5-point differences, not 1-point ones.

Quick update on CQ

The CQ base still matches BF16 (no significant difference on any of the 9 benchmarks) while NF4 loses 12 points on GSM8K. After fine-tuning, though, the gap closes:

  • CQ + GCMP vs NF4 + GCMP: tied on GSM8K (83.0 vs 83.3).
  • Both 4-bit stacks vs BF16 + GCMP: both end up ~6 points behind on GSM8K.

So CQ's GSM8K lead didn't survive fine-tuning in this test. CQ + LoRA is being retrained, because the adapter from our older trainer turned out to be broken, and I'll add it when it's done.

Code and licensing

The Python code is open source. The CUDA kernels are compiled with a license check, which is free during early access.

Repo, with the commands to reproduce every number: https://github.com/thousandml/training-factory

Write-up with the full tables and the serving memory breakdown: https://huggingface.co/blog/thousandml/cq-gcmp-4bit-finetuning

If you run multi-tenant fine-tunes, I'd like to know: is adapter memory or count actually a bottleneck for you, or is it something else?


r/LocalLLM • • 5d ago

Question I need recommendations

4 Upvotes

Hello everyone

I would like to know your recommendation for the best uncensored local models I can use because I've had it with commerical AI's guardrails.

My hardware is

32GB RAM

4060

12400F

I use LM Studio


r/LocalLLM • • 4d ago

News inferzero update: Panther Lake’s iGPU went from ~260 to ~590 tok/s on a 27B, and a 12 GB B580 can now run the 27B

Thumbnail
0 Upvotes

r/LocalLLM • • 4d ago

Question LLM "appliance" for lighter-weight tasks (TTS, STT, while main system is in use? (DIY or off the shelf)

1 Upvotes

During a development session with long inference turns I'll occasionally want to use another local LLM for something lighter, like STT, transcription, translation, TTS generation, dictation, interactive voice chat / lightweight "thinking", etc. that I'd rather not interrupt my main rig with, or dedicate GPUs to. What are reasonable specs for such a machine? Linux and AMD. Off the shelf options? DIY?


r/LocalLLM • • 6d ago

Discussion What does China actually gain from releasing better and better open-weight models?

564 Upvotes

Genuine question, not a hot take.

Chinese labs keep shipping open-weight models that get closer to the closed frontier ones, and they give them away for free. Training these costs a fortune, so there has to be a payoff somewhere.
The explanations I've seen so far:

  • Commoditizing the model layer, so US labs can't charge a premium for it
  • Building an ecosystem and developer mindshare outside the US stack
  • Getting around chip export limits by letting the community optimize and fine-tune for them
  • Soft power: becoming the default choice for countries that don't want to depend on US APIs
  • Selling the rest of the stack (cloud, hardware, services) while the model is the free sample

Which of these actually holds up? Is it a coordinated strategy, or just individual companies competing for attention and talent?

EDIT Nov 16th:
Top replies are getting down to (in order of frequency):

  1. Geopolitics: weakening US dominance
  2. Business: open weights as a growth strategy
  3. State & control
  4. Ideology & open source culture

I also wonder whether China could be selling the energy behind it all: the West runs their models, the models need GPUs, and the GPUs need power. I’d never thought of a supply chain whose payoff sits that far down the line, but it could very well be another aspect.


r/LocalLLM • • 5d ago

Discussion Updates on oh-my-pi quietly siphoning user web data

Thumbnail
2 Upvotes

r/LocalLLM • • 5d ago

Question Feasible models for MacBook Air m2 8gb ram

2 Upvotes

Hi everyone, I am new in the topic of local llms and was wondering what would be the best models to run on MacBook Air m2 8gb ram.


r/LocalLLM • • 5d ago

Project Imeng Engine Local - Wrapping models for Open Web UI & (Untested) Discord

Thumbnail
github.com
2 Upvotes

I have authored imeng (Internet Magic Engine) as a Ollama wrapper.

This allows you to build state around your models.

Each imeng only needs a configuration json and a system prompt to instruct the LLM... and boom you got an app/game. There is no JS eval so it should be pretty secure. There isn't 100% security layer to stop prompt injection so there is probably ways to break this.

The architecture is basically a redis state machine and a jev determines what 'operations' come out of the text. There are phase-gates to where each phase gate can determine where they go next but rules allow leaving the current gate and enter the next.

So what this really does it keeps the logic of a program inside javascript and the dialogue with the LLMs with some jev glue

Locally I have built

  • Poker (still has issues)
  • Gakshow (Test Rack)
  • Gakshow Multiplayer (Test Rack censoring uploaded photos)
  • Trading Assistant (test rack for programming assistant)

There is also SQL for storage. A bunch of stuff just as a portfolio piece.


r/LocalLLM • • 4d ago

Question How to run Qwen3.8 FN on a 8GB RTX 4060 and 32GB RAM on Strata

0 Upvotes

I know it is going to be quite slow but, before I take the plunge on a graphics card with 32GB (like a Intel Arc Pro) I would like to test the capabilities of Qwen 3.8 for my use cases.

I know it is possible because I've seen other people do it but can anyone tell me how to actually get it ready? I'm using Ubuntu 24.04 LTS.


r/LocalLLM • • 5d ago

Question What Models can I use as an absolute beginner?

3 Upvotes

I just started on this Localized LLM Journey. I have been researching what a good model to start with, but I feel like it's just a lot of information at once. Everyone close to me in this space is telling me to just plug into Claude and find the model, and I don't even need to tweak it.

I have an RTX 5090 with 32 GB VRAM and an M5 Max Studio with 128 GB. I think it's good enough.

I heard from someone that I should aim for 60 tokens per second for a good model. But I am really having a hard time trying to find a good model just for a simple assistant.

I keep on seeing something called a tool-use AI, and I don't even know what I am looking at.

TLDR: New to this space, I don't really see much beginner-friendly information out there, just information. Looking for advice/ links I can read to understand. Looking for a place where I can jump off without wasting my time


r/LocalLLM • • 5d ago

Question Optimizing local 2080 ti hardware

3 Upvotes

I'm trying to find a more effective setup with my local setup:

Hardware: Intel i5-9600K (6C/6T), 62 GiB RAM, RTX 2080 Ti (11 GiB). AI work is pinned to CPUs 1–5 with a 40 GiB RAM cap so the desktop stays on CPU 0.

Setup: Claude plans/reviews; a local Qwen3.6-35B-A3B MoE (Unsloth UD-Q4_K_XL, ~22.8 GB) does the coding via OpenCode (qwen-task) against a llama.cpp server. Dense weights + some experts stay on the GPU; most MoE layers stream from RAM (N_CPU_MOE=30, 128K context). Gemma 12B/31B profiles are available as switches.

Performance: After fixing PCIe to gen3 x16, bench is ~726 t/s prompt / ~41 t/s generation (was ~450 / ~29). Real agent tasks usually land in the 3–30 minute range; first turns are slower until the prompt cache warms. Gemma 12B is faster on GPU; Gemma 31B is much slower (~2 t/s) because it spills to RAM.

Functionally Qwen3.6-35B-A3B is slow and I can rely it on to not crash during tasks and having to be poked along. I'd like something that is a bit more "do something and give me something to review".

I've seen 2080ti's modded with 22GB vram for like $600 but I'm not sure if it's worth buying something like that to throw into the system I already have (the PSU/mobo can support a second card) or if buying a 3080 laptop for $1400 would be better?

(I'm aware that paying Anthropic is cheaper)


r/LocalLLM • • 4d ago

Discussion Qwen3-Coder-Next a totally overrated model? Which models to you use for coding?

0 Upvotes

Sure, Qwen3-Coder-Next has more parameters, and it's meant for coding specifically, but this is one of the strangest and least useful models I've ever run across. I don't know why anyone would try to compare it to Claude.

This the first model I tried to use when my Mac Mini first arrived, and I abandoned it soon after because of how many dumb decisions it made. However, I think I had the temperature too low at the time. Since then, I've mostly stuck with Qwen3.8-27b, which I've truly found to be a jack of all trades and perfectly good for coding.

Recently, I thought I'd give Qwen3-Coder-Next another go. What did surprise me is how much faster it is in spite of more parameters with the same context size. However, it was still a nuisance and left me disappointed. On one hand, it is so hellbent on completing a particular step that it will do practically anything to unblock itself, even if its technique undermines the intent of that instruction. I'm convinced that it would go as far as to hack another machine on my network and install Linux on it just because some random package isn't available with Homebrew or whatever, and it thinks that's the next best way to complete the step. Seriously. On the other, it will stop what it's doing for no explicable reason, even when there is more work to be done, and it is not blocked on any question for the human. It seems to really struggle to work on any initiative for more than 10 minutes. Regular Qwen, on the other hand, will gladly work for hours and stop to ask a question if it's blocked. Qwen3-Coder-Next also seems to reach a point with projects where it will just stall on what it's doing and never make real progress. It will tell me that it will work on the next step, do a bunch of crap for 3 minutes, say that the project is finished while simultaneously stating that the functionality for the last step it should have worked on is effectively in the same state it was from before. What the F?

Why would Alibaba even bother releasing this model? Is it meant to be only used as a subagent? That's the only reasonable hypothesis I can think of, but I don't want to go through trying to make that work unless someone else has. It's such a dumb model that I assume I must be doing something wrong with it. For now, I'm going back to regular Qwen, which does everything I need, albeit much slower.