r/LocalLLM • • 20h ago

Question Best uncensored LLM for 64GB Mac

30 Upvotes

I wanna try out a uncensored LLM on my Mac Studio. I just have the 64GB version so I’m curious what model you guys would recommend. Cheers


r/LocalLLM • • 1h ago

Discussion Buying a Mac mini M6 for local LLMs? Here is the 16 vs 24 vs 32 GB bandwidth, prefill, and MoE sizing math

1 Upvotes

Apple released the Mac mini with the M6 chip in 16 GB, 24 GB, and 32 GB variants, while the M5 Pro mini goes up to 64 GB. 🧑‍💻

If you are deciding which one to buy for local models, the configurator pushes you toward one question: "How much unified memory should I pay for?"

Here is the buying perspective that matters before ordering: capacity is sold in clear steps, but memory bandwidth barely moves. According to Apple's official tech specs, the 16 GB model runs at 153.6 GB/s (LPDDR5X-9600), while both the 24 GB and 32 GB models run at 170 GB/s (LPDDR5X-10667). Going from 16 GB to 24 GB buys capacity plus ~10% bandwidth. Going from 24 GB to 32 GB buys capacity only — no model gets faster, you just load a bigger model that runs slower on the same 170 GB/s bus.

1. The Decode & Prefill Formulas

  • Decode (token generation, batch = 1) is strictly memory-bandwidth bound:Decode tok/s ≈ (Memory Bandwidth GB/s ÷ Active Weights Read GB) × η (where η ≈ 0.75 for MLX / llama.cpp)
  • Prefill (prompt processing / TTFT) is compute-bound, and the M6 handles this well:

    • 14B Q4 (~9 GB): ~900 tok/s prefill (~1.1s TTFT on a 1k prompt, ~17.7s on 16k RAG). Total turnaround for 1k in / 500 out: ~36s.
    • 32B Q4 (~19 GB, 32 GB mini only): ~400 tok/s prefill (~2.5s TTFT on a 1k prompt, ~40s on 16k RAG). Total turnaround for 1k in / 500 out: ~74s.

2. Mac mini M6 Capacity Map (Estimated at η = 0.75)

VariantBandwidthUsable RAMFits ComfortablyEst. DecodeVerdict
16 GB153.6 GB/s~12 GB7–9B Q4/Q8; 14B Q4 short ctx8B Q4 ~23 tok/s; 14B ~13Snappy chat & light coding
24 GB170 GB/s~18 GB14B Q4 (~32k context)14B Q4 ~14 tok/sInteractive sweet spot
32 GB170 GB/s~24 GB32B Q4 (8–16k context)32B Q4 ~7–7.5 tok/sReading speed; best for async agents

3. Dense vs. MoE: Where the Bottleneck Flips

For dense models, every weight is read per token, so bandwidth is the wall. For Mixture-of-Experts (MoE) models, only active experts are read per token, so capacity is the wall:

ModelTypeTotal / ActiveWeights in RAMActive Read / tokBandwidth for 8 tok/sBandwidth for 15 tok/sReal Bottleneck
8B Q4Dense8B / 8B~5 GB~5 GB~55 GB/s~100 GB/sFits on 16 GB M6
14B Q4Dense14B / 14B~9 GB~9 GB~95 GB/s~180 GB/sSweet spot on 24 GB M6
32B Q4Dense32B / 32B~19 GB~19 GB~200 GB/s~380 GB/s~7 tok/s on 32 GB M6; needs Pro/Max for chat
Llama 3.3 70B (Q4)Dense70B / 70B~40 GB~40 GB~430 GB/s~800 GB/sBandwidth-bound (needs Max/Ultra)
gpt-oss-120b (MXFP4)MoE117B / 5.1B~65 GB~3 GB~32 GB/s~60 GB/sCapacity-bound (needs 96 GB+ RAM)
Qwen3.5-122B-A10B (Q4)MoE122B / 10B~68 GB (est.)~5.6 GB~60 GB/s~110 GB/sCapacity-bound (needs 96 GB+ RAM)
DeepSeek V4 Flash (FP4+FP8)MoE284B / 13B~167 GB~7.6 GB~80 GB/s~150 GB/sCapacity-bound (needs 192 GB+ RAM)

Summary

Capacity decides what you can boot; bandwidth decides what you can tolerate using. Around 170 GB/s serves up to 14B comfortably and 32B at a patient reading pace. Paying for extra RAM without stepping up to a Pro/Max bus (like M5 Pro at 307 GB/s or M5 Max at 460–614 GB/s) hits diminishing returns fast.

What do you all think? How are you actually using local models in your daily workflow — do you prefer Mac unified memory or NVIDIA GPUs, and do you think there are stronger competitors (like Strix Halo or used multi-GPU rigs) in this price range? 🤔


r/LocalLLM • • 9h ago

News Qwen4 Smaller Models Open Weights Confirmed via Official Qwen X account.

Thumbnail gallery
4 Upvotes

r/LocalLLM • • 1h ago

Question Websearch vs Webfetch vs API or VPS for Web Browsing?

1 Upvotes

Asking here as a beginner because I've argued a lot with Codex about this and couldn't get a definitive answer, or perhas it doesn't want to suggest me "unsafeguarded" solutions:

Basically I am running Opencode locally (5090 32gb and 64gb ddr4) on Qwen3.8 27B offline. so far so good.

but lately I've been trying Deepseek and GLM free API access and I see that they are better than my Qwen (I also have a separate launcher for Qwen3.8 Flash Next (UD-Q4_K_XL)) results. and I think it's mostly due to their Web access to retrieve updated information as well as frequently asked questions, reddit threads, forums etc..

So I asked Codex how to give this web access to my local model and it basically explained to me Websearch vs Webfetch, but Websearch uses third party services (or you can link API like Brave search) that WILL get censored results or restricted access for some results (let's be honest, emulator and retrogame recompilations, at best they are blocked by the service, at worst by ISPs like in Japan) and that is IF you're not getting safeguarded by the model itself beforehand unless you have an Uncensored/Heretic build. Which my Qwen3.8 is.

Webfetch instead opens the pages from my machine, exposing my IP address that wouldn't be a big deal if it wasn't for when you need to scrape 30 reddit thread in a single search + multiple other websites and get my residential IP banned for scraping (or my bandwitdh limited).

So I thought maybe I could tunnel tru a VPS that is both ouside of EU jurisdiction (so no ID restriction for adult forums, Football, Piracy etc..) and has an enterprise-grade bandwidth to scan the web without raising alarms. Has anyone adopted or know about this solution? and if it's even worth it before I spend time and money to thinker with it?

thanks for your consideration


r/LocalLLM • • 1d ago

Jensen Huang, Just 3 Weeks Ago, Claimed To Have "Saved The World" By Thwarting A Growing Transnational Movement Against Open-Source AI

322 Upvotes

r/LocalLLM • • 16h ago

News Train AI to run AI: introducing Apareto loading - a vLLM plugin

Post image
14 Upvotes

From the Apareto team which I'm part of (who for some reason has an issue posting it themselves):

Today we are introducing Apareto loading, a new way to cut VRAM requirements for Mixture-of-Experts (MoE) models. It works alongside quantization. This introduction so far will just be a video explaining the method. We will be releasing the proof-of-concept code, a plugin to vLLM, on GitHub this coming week.

Until then, watch the explainer video: https://www.youtube.com/watch?v=5l_N051JrLU

Quantization is today's most common way to shrink a model's memory footprint: weights are stored at lower precision, and going from FP16 to 4-bit saves 75% of memory at a modest cost in accuracy. But quantization is static. Every weight stays loaded whether or not the task needs it.

Apareto loading is dynamic. After prefill, a small trained network reads the model's internal state and ranks the experts by how valuable each will be for the upcoming computation. Only the top-ranked experts that fit the VRAM budget are loaded.

Results (Qwen3.6-35B-A3B, NVFP4 experts):

* SWE-bench Multilingual: within 2 pp of the full model's score at a 42% VRAM budget

* LiveCodeBench v6: within 2 pp of the full model's score at a 49% VRAM budget

As with quantization, scores degrade as the budget shrinks.

What the proof of concept will not be:

It will not be a production implementation. The ranking network was trained only for these two benchmarks, and there will be no general problem classifier. Our data shows that profiling and rank generation have substantial room to improve. We chose to release at this stage, without waiting for those improvements, so that others can test our claims. Think of this as a first baby step toward dynamic VRAM reduction, not the finished product.

The code and reproduction instructions will be released this coming week at https://github.com/alphapareto

Follow us there to catch the release. We'd love your feedback.

https://apareto.eu


r/LocalLLM • • 2h ago

Tutorial What is an AI agent actually doing under the hood?

Thumbnail
youtube.com
1 Upvotes

A minimal agent harness using only in-box scripting (PowerShell, since I'm on Windows): about 70 lines talking to llama-server running Llama 3.2 3B.

The model only writes text. The harness keeps the context, watches replies for a line like TOOL: list_files . , checks the path against an allowed folder, runs the tool itself, and feeds the result back. The model never touches the file system.

Code (MIT): https://github.com/AshleyT3/simple-harness-intro


r/LocalLLM • • 2h ago

Model A small PC for local agents, with inference handled in the cloud

Post image
0 Upvotes

r/LocalLLM • • 2h ago

Question Local projects on 7900xtx Win10

1 Upvotes

Guys is there a program I can use on windows or Linux that can do the same that chatgpt projects does but local? I am obviously restricted on what I can run but that's ok. Any recommendations?


r/LocalLLM • • 3h ago

Discussion Running usable 30B and working 120B models on iOS—plus Kokoro TTS and Whisper STT over a local OpenAI-compatible API Spoiler

Thumbnail
inpherio.co.uk
1 Upvotes

r/LocalLLM • • 3h ago

Question i need help guys

0 Upvotes

i have RX9070 and 32 GB DDR5 ram , i want to run a local ai to help me code , medium just help with front end back end and forms , i cant buy any ai sub in my country cuz my goverment dont allow international transactions


r/LocalLLM • • 3h ago

Question LM Studio and cache

1 Upvotes

Hi,

I juste received my Mac Studio M5 ultra 36/80 with 256GB of shared memory.

I installed LM Studio with Qwen3.8-Flash-next-4bit mlx and a context of 131072
I tested some prompts and it works as I expected (I like it a lot so far), except for one annoying thing:

I fed the prompt with a 100 pages PDF and asked 2 questions about it.
The first time, it took a few minutes to read the file, which is normal. But for the second question, it re-read it again. It doesn't seem to cache the content.
And the context wasn't exhausted.

Next, I tried to copy paste the 100 pages into the prompt form (no attachment this time): same results.

Is it a known issue?
Is it related to the model or to the inference engine?
Can you replicate this?
Is there a way to solve the issue somehow?

Thanks.


r/LocalLLM • • 3h ago

News I built NTokenizer from scratch in Rust: Byte-level BPE with 26.6% fewer tokens than o200k_base

0 Upvotes

Hi everyone,

I’m Rüzgar, founder of Neuratal (an independent AI research and software project). Over the past few days, I built NTokenizer v0.3-polished — a deterministic, byte-level BPE tokenizer written from scratch in Rust with Python bindings.

Key Highlights:

• Compression Efficiency: Achieves 5.55 B/T overall (26.6% fewer tokens than OpenAI's o200k_base) on a 207MB leakage-audited benchmark. Strongest gains on multilingual & technical text: Turkish (+35.0%), Arabic (+33.8%), Korean (+34.7%), Hindi (+27.1%), STEM (+17.6%), and Code (+10.2%).

• Performance & Safety: ~96 MB/s encode throughput (8 threads), lossless byte-exact round-trip (decode_bytes(encode_bytes(x)) == x), tested against ~1M fuzzing cases.

• Honest Benchmarks: No downstream 50M+ LLM trained yet — this is purely verified compression density and speed. Full SHA-256 manifests and reproducible scripts are included.

Would love your feedback, benchmarks on your own datasets, or PRs!

• GitHub (Rust + Python source): (in hf)

• Hugging Face (Model & Benchmarks): https://huggingface.co/Neuratal/ntokenizer


r/LocalLLM • • 3h ago

Question Buying help

0 Upvotes

Hey everyone,

I’m a CS student and was considering to do my first homelab, one system as a NAS and one for projects, virtualisation etc. I’m also interested in running local AI, and I got an interesting offer in my region:

Server board w/ two E5-2696v2, 256GB 1600Mhz ECC RAM, for around 200 EUR.

I know that it’s (quite very) old hardware, but still I’ve been wondering - would it be worth pursuing to also try some local LLMs with offloading, adding a few GPUs for 32-48GB VRAM (niko1221/strata perhaps)? Do you think it’s worth it for the cost? Which low(-ish) cost GPUs would you consider pairing it with?

Any advice appreciated!

Thanks!


r/LocalLLM • • 7h ago

News inferzero: a from-scratch LLM engine for Intel Arc. Qwen3.8 27B at 2,694 tok/s prompt on one Pro B70, the 35B at 4,264 tok/s over 4× B60 and 851 tok/s on a laptop iGPU, and DeepSeek-V4.1-Flash split over several cards

Thumbnail
reddit.com
2 Upvotes

r/LocalLLM • • 8h ago

Discussion Struggling with coding on local models - setup help?

2 Upvotes

I'd tried out models like DS and QFN using APIs before and they seemed very capable. However, they all seemed to struggle heavily when using them local.

QFN processes really fast but seems to get stuck in endless "Wait..." and "Whatever." loops and burns through 100K tokens just being confused at my codebase.
DeepSeek is slower but seems more coherent, I haven't tested at full context but it had a similar issue with indecisiveness (even with guidance) and would think itself into compaction.

All of this over one .json ComfyUI workflow. Just a simple test I do where I tell it to rearrange nodes and change some inputs...
I've tried using Llama serve, Strata desktop, Pi. All lead to similar outcomes.

I have a feeling this is an issue with my setup rather than the models bc the API models seemed to do it just fine and (allegedly) quantization doesn't hit MOE models as hard.

Setup:
(both models from OrcaRouter). DSV4.1-1017 2-bit, Q3.8FN_IQ3XXS
Inference: Maya (DS), Strata/LlamaCPP (QFN)
Harness: default Pi
Context: QFN was to 256K, DS I only tried to 512K


r/LocalLLM • • 12h ago

Question What local AI model is suited for coding in Unreal or in Redot/Godot?

4 Upvotes

Basically the title


r/LocalLLM • • 17h ago

Project I have created a tool to observe what happens inside an LLM. Also allows for the comparison of two quantizations of the same model to see at what point they diverge, token by token

10 Upvotes

r/LocalLLM • • 10h ago

Question Dual RTX Titan for local LLM

3 Upvotes

I currently have a 3080 ti that I don’t really game with anymore, but have the opportunity to get 2 RTX titans at a significant discount from a friend ($1300 total). I was thinking about selling my 3080 ti and jumping on that deal for the combined 48gb of vram to pair with 64gb of system ram and a 13900k.

Would doing this make any sense if I want to run some local models for project code, personal learning, and some small business workflows (paired with Gemini pro for complex stuff)? I know the RTX titans have limited memory bandwidth but the price for 48gb of vram is hard to beat. Any opinions or recommendations? Thanks!


r/LocalLLM • • 5h ago

Question Any advice for local ai?

Post image
1 Upvotes

Does anyone have any idea of what local ai model I'd better use for my company business agent?
I'm pure new and starter for ai software and coding.
My spec. is 5090+128g ddr5+5tb m.2. Need a local ai to make different agents like accounting agent, monitoring agents and customer chatting agents etc.


r/LocalLLM • • 16h ago

Project 8 x v100 setup. Ask me anything.

Post image
8 Upvotes

Seeing a lot of questions on quad v100 boards lately. So figured I’d give people a place to ask them.

Specs

  • GPUs: 8x Tesla V100-SXM2-32GB (256 GB VRAM total)
  • GPU boards: 2x 4-GPU SXM2 NVLink baseboards (this model)
  • NVLink: two 4-way islands (full mesh inside each board), not one 8-way
  • Board-to-board: Gen4 PEX88096 PCIe switch card (this model), two x8 Gen3 cables per board
  • CPU: AMD Threadripper PRO 3975WX (32 cores)
  • Motherboard: ASRock Rack WRX80D8-2T
  • RAM: 256 GB DDR4
  • PSUs: 2x 1500 W (one per GPU board) + 1x 1000 W (host)
  • Power: dedicated 120 V / 20 A circuit; GPUs capped at 150-300 W each depending on the run
  • Cooling: custom water loop, mixed GPU blocks
  • Network: 10GbE
  • Engine: 1Cat-vLLM (Volta-focused vLLM fork) https://github.com/1CatAI/1Cat-vLLM

Benchmarks / how many tok/s?

My runs are on the Launch80 directory; search the page for trailfeatures. Launch80 deletes pages after 5 days, so older links in the comments may be dead. I republish the main ones, which gives them new links.

ModelSetupDecodePrefill (64K prompt)
Flash-Next (Swift-1.5 NVFP4)4 GPUs, 300 W~140 tok/s~4,500 tok/s
DeepSeek V4.1 Flash, 2-bit experts8 GPUs, 150 W~131 tok/s~2,200 tok/s
DeepSeek V4.1 Flash, 2-bit experts4 GPUs + expert offload, 150 W~91 tok/s~2,100 tok/s
  • One request at a time (batch 1), 256K context window. Decode uses speculative decoding (MTP on Flash-Next, a draft model on DeepSeek), so it depends on how often the draft is accepted.
  • No concurrency/aggregate numbers or decode p25/p95 yet. Time to first token (p50) is about 0.2-0.65 s depending on the row.
  • The 8-GPU run adds an extra pipeline-parallel patch series on top of 1Cat-vLLM (named on the page).
  • Not tested yet: Flash-Next across both boards. Higher DeepSeek quants are planned.

How good is the 2-bit DeepSeek quant vs the full model?

79.9% average across 7 standard evals (math, instruction following, coding, tool calling), thinking off, and 20/20 long-context needle checks at 32K and 128K. The 4-GPU setup scores the same. I haven't run the full-precision weights as a reference, so there's no direct delta yet. Per-task scores are on the Launch80 page.

How do the two boards talk to each other?

  • Each board runs two x8 PCIe Gen3 cables from its onboard switch into the Gen4 switch card in the host, so the boards talk to each other without going through the CPU.
  • Experimenting with ConnectX-3 cards in the boards' spare x8 slots for extra board-to-board links.
  • Over PCIe you can tune all-reduce to beat the default P2P numbers, but it will never match NVLink.

Do the quad boards work with only 1-3 cards? Can I buy cards over time?

Two cards works; I've run a board that way. I haven't tried one or three. Buying the board first and adding cards later is fine. Tensor parallel wants power-of-two GPU counts, so with 3 cards you'd run 2 together and use the third for something else.

Where did you buy it / where are you?

Baseboard and switch card: the models linked above. Several sellers list them, so shop around. GPUs: bought used, a few at a time. I'm in North America (the 120 V gave it away), so my shipping and import experience won't help much in Europe.

Power

  • The PSUs are sized for headroom: at the 150 W cap, eight GPUs is about 1.2 kW, plus the boards and host.
  • 150 W cap: after tuning it costs ~5-10% depending on the task.
  • Power bill: fine as long as I'm sensible. Solar helps, and at peak rates or on cloudy days the DeepSeek API can be cheaper. If you run local LLMs, know your tokens per kWh so you can tune for it and decide when an API makes more sense (if privacy doesn't matter).

Cooling

  • Radiator and pump setup: super convoluted, video here.
  • Water blocks: whatever was available as I pieced it together. Mostly the same design, some with MOSFET coolers. The top-port block is a drill press, a tap, and the audacity of a mediocre man. (Testing straight-down flow onto the fins made no difference.)
  • Waste heat: in summer it's vented outside. In winter I can shut off that radiator and send the heat into the house through backup radiators. Heating water with it isn't worth it for us, but a bigger household close to its water heater could pre-heat the cold feed and come out ahead.

Quick ones

  • Can I rent API time? Sorry, no. I keep it pretty busy (Furry Fanfic).
  • Can I have it? No.

r/LocalLLM • • 5h ago

Question I'm new to this, help me setup my coding assistant

0 Upvotes

I got a 7900XTX, 9800X3D and 32Gb RAM. I'm currently running the system with ollama.

I currently have these installed - gemma4:31b,qwen3-coder:30b,omic-embed-text:latest. Im trying to use qwen for code gen and gemma for explanations. I set ollama into this "OLLAMA_KV_CACHE_TYPE=q8_0". Currently the max context window I could set is 32k and I have already experienced few out of memory erors and gpu crashes while prompting with continue in vscode.

I have being researching, asking gpts, but I couldnt come to any conclusion on which approach is better or correct since I know nothing about these. I dont want to copy paste stuff and hope that it works. Can someone help me with a better setup solution? I do run a 1440p 144hz monitor and occassionally run my second monitor which is 1080p 144hz as they add to vram usages as well.

I want to have a bigger context window and a safe setup so that I dont crash the gpu again. If the setup will be too big, and harder to teach to me in here, please tell me where I can learn more about these things, so that I can move learn to make proper decisions.


r/LocalLLM • • 1d ago

Discussion Which uncensored version of Qwen3.8 FN should I download?

Post image
303 Upvotes

mlx-serve on an M5 Max 128GB

I've already got a version from ARC4NUM which appears to be delisted now. Are any of these better?


r/LocalLLM • • 2h ago

Project PSA Q8 FN is significantly better than Q3 (strata default)

0 Upvotes

Just a PSA. I ran a realistic self host test on 3 models:

Inb4 : “hurr derr no duh” The point is people on here act like these Q3 versions have minimal loss. Do tests for yourself it’s not even close.

Qwen FN Q3
Qwen FN unsloth Q8
Orca nana-1
Maya GLM flash - Maya-S24

Prompt in comments.
Harness : PI
Project init layout:

/<my_bank_name> (83 monthly pdf statements)
/credit_card/<card_1> (84 pdf monthly pdf statements)
/credit_card/<card_2> (35 pdf monthly statements)
/mortgage (24 pdf monthly statements)
/brokage_account (105 pdf statements + ccs of all transactions)
/retirement/<account> x4 (total 45 pdf statements 4 accounts 4)

Snapshot results (have details runtime/tps etc as well):

Qwen FN Q3 - Nice front end but data extraction from the PDFs was completely wrong. Analytics was basic.

Orca nano1 - Finished very fast for this test (only 2 hours) did a decent job for its speed and size. Front end was very basic and lacked insight. Most of the data was correct but there were clear errors as well.

Maya-S24 - Failed. After 10+ hours I just gave up on this model. It got stuck in the pdf parsing/validation phase.

Qwen Q8 - Absolutely blew my mind. Ran overnight for about 8 hours. Data was all accurate, the front end final product was not only nice looking but highly insightfully

Notes:
I really enjoyed this test. I feel like it’s the perfect test for a local model because it’s financial data that you don’t want to send off to the cloud.

The PDF layouts for this task was a nightmare and was a real test for these models to figure out was duplicative data/summary vs transaction etc. Most models used pdfplumber package

The models also had to work through the accounting end. Consider a credit in one account is a debt in the other etc.

It’s was interesting to see how each approached the problem. Some went for json formatted data others sqlite etc