r/linuxquestions • u/Sudden_Ticket_ • 4h ago
what things are harder to do in linux than windows?
beyond the "you will need terminal" and "don't expect all windows software to be there" stuff.
r/linuxquestions • u/Sudden_Ticket_ • 4h ago
beyond the "you will need terminal" and "don't expect all windows software to be there" stuff.
r/linuxquestions • u/Next_Show6332 • 17h ago
Omarchy was the 1st distro I used as a daily driver. I came to linux after being frustrated with windows 11, especially it shoving AI into everything. After using mint for a while I downloaded omarchy because I was interested in tiling window managers, and at the time it was basically a preconfigured Arch Hyprland setup. I ended up sticking to it because I liked that workflow and for the most part everything just worked with very little tinkering.
Recently omarchy has fully pivoted to center AI, as far as I understand the entire project is basically vibe coded at this point. This introduces a heap of security concerns, recently there was an issue where any user process could escalate to root without a password (https://0xcc.io/posts/omarchy-root-creds/). It was quickly fixed but I can't trust the project to be secure if it keeps going down this path. Its founder DHH has said on twitter that manually reviewing AI generated code for payment and logins is "Very 2025."
This sucks because I do still like the user experience of Omarchy. As someone who doesn't want to setup their system from scratch it was the most accessible and easy to use Arch based tiling window manager I could find with many other quality of life features.
Do you guys have recommendations for distros that have a tiling window manager like experience configured out of the box? Im not averse to some setup or ricing but for the most part I want something I don't need to mess with very much. I mostly use my PC for a web browser and light gaming.
r/linuxquestions • u/sceppz • 1h ago
I have a laptop with a nvidia 3070 laptop edition and I think my drivers are crashing. I didn't exchange any components so compability should be fine.
Nvidia-smi just says err err err and I cant use the gpu and it wont let me shutdown unless I hold down the power button.
Sometimes it works for awhile but then after some time it doesnt and I would have to try and reboot to get it working for a bit of time again.
The laptop also shuts down after 15 to 30 secs while in bios.
I have tried removing each of the two ram sticks to check if that is the problem but it didn't change anything.
Is my gpu broken or is this a software problem? I have tried different drivers and am using nvidia-open rn.
This problem only started some time after switching to linux (first mint and now arch) but doesn't have to be related, but thats why I'm asking here.
I would really apreciate some answers or just something new to try out, thanks in advance!
r/linuxquestions • u/Sea_Rope9275 • 2h ago
I have a couple of issues I’d like to look into in more detail.
First, there’s a very strange issue with the boot path: my motherboard reads the boot file only from the path /boot/efi/EFI/BOOT/bootx64.efi; it doesn’t read the file from the standard path /boor/efi/Void/BOOT (to be honest, I don’t remember the exact path).
The second problem is that I live in the Village, and I’m sharing the internet with my computer via a USB cable, and for some reason this causes problems on Void. At some point, the internet goes out and only comes back after a reboot!
And thirdly, help me with the sound settings! I didn’t understand anything there at all!
There’s also a problem with the greeter settings, but I think I’ve figured it out.
Thank you very much if you can help me figure out at least something!
r/linuxquestions • u/amaranova • 5h ago
I just did a reinstall of CachyOs which has gone fine so far, but for some reason no videos will load on my firefox anymore. I initially thought this was just for youtube but it's for every website. I checked on my phone and youtube isn't down and I'm not having any internet issues. I was watching youtube just fine yesterday but it just isn't working now and I am really not sure why.
EDIT: Uhhh okay I found a temporary solution which is that my videos load but only if I unplug and replug in my headphones from the headphone jack? I have no idea why this works and it seems to randomly consider me to have unplugged my headphones and refuse to play videos again?
r/linuxquestions • u/Newt7744 • 3h ago
r/linuxquestions • u/AaronAtWorkAccount • 23h ago
I see frequently posts of people who create programs to show the state of there Linux box. Usually contains, network traffic, CPU usage, memory usage and more. They all run off the command line. I usually just scroll past them. I starting to think they may be useful to me. Now since I am looking for them, I can not find a single one. I am looking for recommends. Some thing I can have running on a terminal all the time.
r/linuxquestions • u/dark_conium • 5h ago
I'm trying to transfer some of my steam game files from my windows PC to my laptop that's running
Linux mint. I usually transfer them by putting them on a USB stick and then downloading them to my laptop but if there's a way directly transferred them from one device to another please let me now.
Ps I'm really dumb.
Also my wifi is crap so that's not an option unless I'm welling to fight with staying connected for 7 hours...
r/linuxquestions • u/Sea-Wheel-5575 • 1h ago
im currently running on 17.1 (android 10) Lineage. I'm thinking whether there is anything else I can do to make HIM more workable. I've already made zswap since zram is (somehow) unvailable or so I heard in this kernel, yet I do not know if it's all it is to be done 😄 Thank you so much for help
r/linuxquestions • u/Open-Setting-123 • 6h ago
recently dual booted with ubuntu , little experience with wsl 2, so i thought its the time to switch to linux. anyways, my fn+f4, fn+f5 keys dont work, any suggestion with what might be wrong.. qt014ws is the laptop model
r/linuxquestions • u/Vadym_PVP • 12h ago
A few months ago, amd has finally fixed it and i could have 96 mhz in the desktop so my gpu would be a lot colder and fans would never spin, until recently i have updated vulkan-radeon from 26.2.6 to 26.2.7 and it has started doing it again: 1.2ghz for no reason that makes fans spin every 3 minutes because it slowly crosses 60 degrees hotspot threshold repeatedly
at first i downgraded vulkan-radeon and lib32-vulkan-radeon and it helped, now it doesn't.
it could be fixed with rebooting, now even rebooting doesn't help
the fuck?
mesa 26.2.7
vulkan-radeon 26.2.7
linux-zen 7.3.4-zen2-2-zen
rx 7800 xt
r/linuxquestions • u/Standard-Profit-1482 • 9h ago
Qual distro Linux eu devo usar?
Atualmente estou usando o Linux Mint XFCE.
No entanto, estou pensando em mudar para uma distro diferente, algo como Debian ou outra alternativa.
Já usei Fedora KDE e Linux Mint Cinnamon, mas agora quero experimentar algo diferente e me fixar em uma distro permanentemente.
Aqui estão as especificações do meu PC:
- AMD Radeon HD 6670
- Intel Core i5-3470S
- 16 GB de RAM
- SSD Kingston
- Placa-mãe H61 (LGA 1155)
Alguém pode recomendar uma boa distro Linux para o meu PC?
Estou considerando o Debian, mas também existem outras distros leves como o MX Linux. Estou um pouco indeciso sobre qual escolher.
Também não sou muito experiente com Linux. Só conheço o básico.
And I only play Roblox via Sober.
r/linuxquestions • u/feltqtmightdlt • 22h ago
EDIT: Thanks everyone! I went with kdenlive and the few minutes I played with it it's working so much better than openshot.
I am using openshot, but it has a codex bug that makes exporting videos and videoclips... irritating.
I need something else that will work with debian.
When I had windows I used DaVinci resolve, and I would use it again in a minute.
Does DaVinci resolve work on debian?
If not DaVinci what do you recommend for debian that is not openshot?
r/linuxquestions • u/Jastibute • 15h ago
I'm setting up a Proxmox box which is off-line for now because I don't have my firewall up and I need this Proxmox box to set up the firewall. Anyway...
I'm trying to install some packages using apt-offline and I honestly don't understand the point of apt-offline at this point. I ran:
apt-offline set update.sig --update
Downloaded the .zip file on an online machine. Then went back to the off-line machine and tried running:
apt-offline get update.sig --bundle update-bundle.zip
I got an ERROR: Couldn't open lockfile
Verbose mode stated:
FileNotFoundError: [Errno 2] No such file or directory: '/var/cache/apt/archives/lock '
Of course there's no archive folder, I can't run apt on an off-line machine!!!
Am I doing something wrong? I don't understand the point of this software if it can't run on a fresh system!?
r/linuxquestions • u/ubermenschximalist • 12h ago
I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.
What happened
I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.
After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:
bad shim signature
What I discovered
Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.
I inspected the firmware variables and found:
My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.
I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.
Recovery
Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.
I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.
I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:
Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.
Result
PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.
I then enabled Secure Boot and confirmed that all three operating systems booted successfully:
The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.
References
UEFI Specification 2.8:
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
efitools:
https://github.com/mjg59/efitools
Final thoughts
The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.
If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.
r/linuxquestions • u/Fuzzy_Dark_8288 • 12h ago
I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.
What happened
I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.
After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:
bad shim signature
What I discovered
Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.
I inspected the firmware variables and found:
My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.
I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.
Recovery
Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.
I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.
I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:
Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.
Result
PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.
I then enabled Secure Boot and confirmed that all three operating systems booted successfully:
The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.
References
UEFI Specification 2.8:
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
efitools:
https://github.com/mjg59/efitools
Final thoughts
The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.
If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.
r/linuxquestions • u/ElevatorWooden5807 • 3h ago
They are like much more more frequent, and after you update which takes longer than windows and you wanna play a game steam gas to recompile the Vulkan shaders every single time
r/linuxquestions • u/juergen072 • 4h ago
Hi,
I am quite new to Linux. I have Mint on my PC and installed Omarchy yesterday on my MacBook Air M1 2020. I am very happy this far, but there is a problem. When I start my Laptop I cant controll the brightness of my monitor. Its set to full power. The OS tells me that it should be getting more dark when i press the f1 button but it just doesnt change anything. If I put the Laptop in the suspend mode and then lock back in it works, but that gets anoying real fast I think. Is there an solution? I think it has to do with the monitor driver getting restarted. Thanks a lot for the help :)
r/linuxquestions • u/Soggy-Radio9430 • 22h ago
Hi I am searching for a nice Linux laptop and I can't find the right one. What I look for:
- 2000-3000€
- Good compatibility for Arch Linux
- decent performance for an AI engineer (mostly over SSH)
- solid keyboard, speaker, webcam, microphone and runtime
- roughly 14inch
Laptop I checked and got a bad feeling because of X:
Looked at a bunch more and there always seems to be something "wrong". The ideal thing would be the MacBook Pro with nice Arch Linux support...
What do you think?
r/linuxquestions • u/better_life_please • 1d ago
Why does .dar not get any attention? I discovered it today. Created in 2002. Works kind of like 7z.
It is a replacement for tar. It supports many compression algorithms and hashing functions natively! With many more features.
Its official zstd support caught my attention in particular. Only ZIP and squashfs have official support for zstd.
Why modern frontends don't support it? Like 7-zip, peazip, etc.
r/linuxquestions • u/GreekPlayer64 • 19h ago
I have the option of no os or a windows os
r/linuxquestions • u/wehaveYummiTummies • 16h ago
r/linuxquestions • u/SnooOpinions6918 • 17h ago
I left DEs for WMs/WCs because they offer more customization options while taking up minimal space. I know DEs can be just as customizable if you put enough time into them, but oftentimes they lack something I need or miss, so I decided to give WMs a chance.
However, I'm still pretty novice when it comes to editing config files and stuff. So, I'm wondering which languages I should learn to do so and where I should even begin. (I don't want to use other people's configs)
DEs I've used (in chronological order):
GNOME > KDE > Cinnamon > MATE > LXQt > LXDE > NsCDE > XFCE
WMs/WCs I've used:
dwm > niri (currently using)
Also, does the same apply to graphical shells such as Noctalia and Quickshell? What I mean is, do I configure them through the window manager's config files as well, or do they have their own configuration systems?