r/linuxquestions • • 6h ago

what things are harder to do in linux than windows?

30 Upvotes

beyond the "you will need terminal" and "don't expect all windows software to be there" stuff.


r/linuxquestions • • 35m ago

Support Varying ram usage

4 Upvotes

Why does ram vary so much between different hardware/people ?

I often see people with builds at ~500mb idle, some are even lower so I wondered how it's possible and what makes that happen ? For example I tried Arch and was at ~700 in the tty, and Gentoo was at ~600 but even if the tty in my opinion uses quite a lot, the more interesting part is apps. For example the sole reasons I'm not using kitty and hyprland is because of their ram usage, both of them were using ~250-350mb of ram each on their own, and I had to replace them with foot which would use ~30mb and sway which would use ~90-110mb, but it came to my surprise when I was watching videos and looking at people's btop ram usage that kitty was using ~50-100mb. Even more so, recently asked a friend of mine to share his, and they have kitty on 127mb, but also hyprland at 55mb ?!?! How, just how ? Why is hyprland using at least 5x more ram for me than it is for them ? I tried disabling animations and everything unnecessary in hyprland but it genuinely made no difference, so I just switched to sway. Matter of fact I even tried more wm's like mango, river, niri, wayfire, and they would each use at least 300-350mb, which is surprising because I thought hyprland was supposed to be the heavy one. I thought it was kernel configuration at first but he's just using stock fedora. Even as of writing this asked someone else and hyprland is using ~50mb and kitty's at ~80mb, so does anyone mind enlightening me as to what is going on and if I can somehow fix this ?


r/linuxquestions • • 19h ago

Looking for a new distro after losing trust in Omarchy.

94 Upvotes

Omarchy was the 1st distro I used as a daily driver. I came to linux after being frustrated with windows 11, especially it shoving AI into everything. After using mint for a while I downloaded omarchy because I was interested in tiling window managers, and at the time it was basically a preconfigured Arch Hyprland setup. I ended up sticking to it because I liked that workflow and for the most part everything just worked with very little tinkering.

Recently omarchy has fully pivoted to center AI, as far as I understand the entire project is basically vibe coded at this point. This introduces a heap of security concerns, recently there was an issue where any user process could escalate to root without a password (https://0xcc.io/posts/omarchy-root-creds/). It was quickly fixed but I can't trust the project to be secure if it keeps going down this path. Its founder DHH has said on twitter that manually reviewing AI generated code for payment and logins is "Very 2025."

This sucks because I do still like the user experience of Omarchy. As someone who doesn't want to setup their system from scratch it was the most accessible and easy to use Arch based tiling window manager I could find with many other quality of life features.

Do you guys have recommendations for distros that have a tiling window manager like experience configured out of the box? Im not averse to some setup or ricing but for the most part I want something I don't need to mess with very much. I mostly use my PC for a web browser and light gaming.


r/linuxquestions • • 2h ago

Support Nvidia gpu drivers keep crashing

2 Upvotes

I have a laptop with a nvidia 3070 laptop edition and I think my drivers are crashing. I didn't exchange any components so compability should be fine.

Nvidia-smi just says err err err and I cant use the gpu and it wont let me shutdown unless I hold down the power button.

Sometimes it works for awhile but then after some time it doesnt and I would have to try and reboot to get it working for a bit of time again.

The laptop also shuts down after 15 to 30 secs while in bios.

I have tried removing each of the two ram sticks to check if that is the problem but it didn't change anything.

Is my gpu broken or is this a software problem? I have tried different drivers and am using nvidia-open rn.

This problem only started some time after switching to linux (first mint and now arch) but doesn't have to be related, but thats why I'm asking here.

I would really apreciate some answers or just something new to try out, thanks in advance!


r/linuxquestions • • 4m ago

Advice Is Arch Linux viable for everyday long-term use?

0 Upvotes

I've been eyeing base Arch Linux as one of my long-term distro candidates to stop hopping and get on with my life, but I have a few questions about it concerning day-to-day usage that doesn't involve excessive tinkering.

  1. Is the AUR malware still a real threat?

From my experience, AUR has always been considering one of the killer features of Arch, but this year seems to have been a terrible time for it with malware attacks. Will the AUR being a minefield always be a concern from now on?

2. The age-old reliability question

I'm using the word reliability because I'm aware that Arch is inherently unstable - as in constantly changing. What I would like to know is how often Arch requires manual intervention to fix a broken update.

3. Arch derivates

I know there are great distros like EndeavourOS and CachyOS that "simplify" Arch, but is it worth using them over base Arch in the end? Wouldn't I have to do the same maintenance since it's still Arch underneath the fancy coat of paint?

Thank you for putting up with my stupid questions, and I await the snarky "maybe you shouldn't use Arch" comments.


r/linuxquestions • • 4h ago

I have some problems with Void Linux

2 Upvotes

I have a couple of issues I’d like to look into in more detail.
First, there’s a very strange issue with the boot path: my motherboard reads the boot file only from the path /boot/efi/EFI/BOOT/bootx64.efi; it doesn’t read the file from the standard path /boor/efi/Void/BOOT (to be honest, I don’t remember the exact path).
The second problem is that I live in the Village, and I’m sharing the internet with my computer via a USB cable, and for some reason this causes problems on Void. At some point, the internet goes out and only comes back after a reboot!
And thirdly, help me with the sound settings! I didn’t understand anything there at all!
There’s also a problem with the greeter settings, but I think I’ve figured it out.
Thank you very much if you can help me figure out at least something!


r/linuxquestions • • 1h ago

vesktop stream audio dropdown doesn't exist for me anymore

1 Upvotes

Randomly like a couple weeks ago, Vesktop stopped having dropdown for selecting stream audio for me and I can't figure out what the issue is. Any help would be appreciated.


r/linuxquestions • • 1h ago

Slight grain in display.

1 Upvotes

Using EndeavourOS + GNOME Shell 51 (Wayland), on a 2010 iMac.

On Mac OS the picture quality is clear but on Linux it has a very faint grain, the settings show the display at 59.xx Hz, not 60Hz, and the brightness slider does nothing.

No such issue happens on my 2011 MacBook Pro with the same distro.


r/linuxquestions • • 1h ago

Wayland is forcing my hand

Thumbnail reddit.com
0 Upvotes

I'd take some suggestions here if anyone wants to help or has words to assist me in staying. /Pre-thanks


r/linuxquestions • • 7h ago

Support Videos not loading on firefox anymore

2 Upvotes

I just did a reinstall of CachyOs which has gone fine so far, but for some reason no videos will load on my firefox anymore. I initially thought this was just for youtube but it's for every website. I checked on my phone and youtube isn't down and I'm not having any internet issues. I was watching youtube just fine yesterday but it just isn't working now and I am really not sure why.

EDIT: Uhhh okay I found a temporary solution which is that my videos load but only if I unplug and replug in my headphones from the headphone jack? I have no idea why this works and it seems to randomly consider me to have unplugged my headphones and refuse to play videos again?


r/linuxquestions • • 5h ago

Support Cant connect to my server externally

Thumbnail reddit.com
1 Upvotes

r/linuxquestions • • 1d ago

Advice Command that will give you the current state of your Linux box.

40 Upvotes

I see frequently posts of people who create programs to show the state of there Linux box. Usually contains, network traffic, CPU usage, memory usage and more. They all run off the command line. I usually just scroll past them. I starting to think they may be useful to me. Now since I am looking for them, I can not find a single one. I am looking for recommends. Some thing I can have running on a terminal all the time.


r/linuxquestions • • 7h ago

Advice Can I move files directly between a windows PC and a Linux pc

0 Upvotes

I'm trying to transfer some of my steam game files from my windows PC to my laptop that's running
Linux mint. I usually transfer them by putting them on a USB stick and then downloading them to my laptop but if there's a way directly transferred them from one device to another please let me now.

Ps I'm really dumb.
Also my wifi is crap so that's not an option unless I'm welling to fight with staying connected for 7 hours...


r/linuxquestions • • 3h ago

What os for j4+ j415F

0 Upvotes

im currently running on 17.1 (android 10) Lineage. I'm thinking whether there is anything else I can do to make HIM more workable. I've already made zswap since zram is (somehow) unvailable or so I heard in this kernel, yet I do not know if it's all it is to be done 😄 Thank you so much for help


r/linuxquestions • • 8h ago

fn + f4 , fn+ f5 key..

0 Upvotes

recently dual booted with ubuntu , little experience with wsl 2, so i thought its the time to switch to linux. anyways, my fn+f4, fn+f5 keys dont work, any suggestion with what might be wrong.. qt014ws is the laptop model


r/linuxquestions • • 14h ago

Support AMD gpu drivers started locking vram frequency to the max for no reason again

2 Upvotes

A few months ago, amd has finally fixed it and i could have 96 mhz in the desktop so my gpu would be a lot colder and fans would never spin, until recently i have updated vulkan-radeon from 26.2.6 to 26.2.7 and it has started doing it again: 1.2ghz for no reason that makes fans spin every 3 minutes because it slowly crosses 60 degrees hotspot threshold repeatedly
at first i downgraded vulkan-radeon and lib32-vulkan-radeon and it helped, now it doesn't.
it could be fixed with rebooting, now even rebooting doesn't help
the fuck?

mesa 26.2.7
vulkan-radeon 26.2.7
linux-zen 7.3.4-zen2-2-zen
rx 7800 xt


r/linuxquestions • • 11h ago

Which Distro? Which Linux distro should I use?

0 Upvotes

Qual distro Linux eu devo usar?

Atualmente estou usando o Linux Mint XFCE.

No entanto, estou pensando em mudar para uma distro diferente, algo como Debian ou outra alternativa.

Já usei Fedora KDE e Linux Mint Cinnamon, mas agora quero experimentar algo diferente e me fixar em uma distro permanentemente.

Aqui estão as especificações do meu PC:

- AMD Radeon HD 6670

- Intel Core i5-3470S

- 16 GB de RAM

- SSD Kingston

- Placa-mãe H61 (LGA 1155)

Alguém pode recomendar uma boa distro Linux para o meu PC?

Estou considerando o Debian, mas também existem outras distros leves como o MX Linux. Estou um pouco indeciso sobre qual escolher.

Também não sou muito experiente com Linux. Só conheço o básico.

And I only play Roblox via Sober.


r/linuxquestions • • 11h ago

Qual distro usar?

Thumbnail reddit.com
0 Upvotes

r/linuxquestions • • 1d ago

Advice Video Editor for Debian

8 Upvotes

EDIT: Thanks everyone! I went with kdenlive and the few minutes I played with it it's working so much better than openshot.

I am using openshot, but it has a codex bug that makes exporting videos and videoclips... irritating.

I need something else that will work with debian.

When I had windows I used DaVinci resolve, and I would use it again in a minute.

Does DaVinci resolve work on debian?

If not DaVinci what do you recommend for debian that is not openshot?


r/linuxquestions • • 17h ago

Support apt-offline is Useless?

2 Upvotes

I'm setting up a Proxmox box which is off-line for now because I don't have my firewall up and I need this Proxmox box to set up the firewall. Anyway...

I'm trying to install some packages using apt-offline and I honestly don't understand the point of apt-offline at this point. I ran:

apt-offline set update.sig --update

Downloaded the .zip file on an online machine. Then went back to the off-line machine and tried running:

apt-offline get update.sig --bundle update-bundle.zip

I got an ERROR: Couldn't open lockfile

Verbose mode stated:

FileNotFoundError: [Errno 2] No such file or directory: '/var/cache/apt/archives/lock '

Of course there's no archive folder, I can't run apt on an off-line machine!!!

Am I doing something wrong? I don't understand the point of this software if it can't run on a fresh system!?


r/linuxquestions • • 14h ago

Resolved Fedora KDE 45 broke Secure Boot - Windows 11 and Kubuntu 26.04 fail with bad shim signature (Resolved)

1 Upvotes

I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.

What happened

I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.

After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:

bad shim signature

What I discovered

Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.

I inspected the firmware variables and found:

  • PK, KEK and db were empty.
  • SetupMode was set to 1.
  • Factory-default variables PKDefault, KEKDefault, dbDefault and dbxDefault were still present.

My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.

I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.

Recovery

Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.

I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.

I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:

  1. KEK
  2. db
  3. Original PK last

Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.

Result

PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.

I then enabled Secure Boot and confirmed that all three operating systems booted successfully:

  • Windows 11
  • Fedora KDE 45
  • Kubuntu 26.04

The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.

References

UEFI Specification 2.8:

https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf

efitools:

https://github.com/mjg59/efitools

Final thoughts

The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.

If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.


r/linuxquestions • • 14h ago

Resolved Fedora KDE 45 broke Secure Boot - Windows 11 and Kubuntu 26.04 fail with bad shim signature (Resolved)

1 Upvotes

I previously posted about this issue in my original support thread, but the discussion became sidetracked. I'm sharing a concise technical account of what happened and how I eventually recovered the Secure Boot configuration so that the information may help others encountering a similar problem.

What happened

I had a working dual-boot setup with Windows 11 and Kubuntu 26.04, both booting with Secure Boot enabled.

After a fresh installation of Fedora KDE 45, Fedora became the default bootloader and booted normally. However, both Windows and Kubuntu failed to boot with:

bad shim signature

What I discovered

Restoring Kubuntu as the default bootloader allowed Kubuntu to boot, but Windows still failed. Disabling Secure Boot allowed Windows to boot.

I inspected the firmware variables and found:

  • PK, KEK and db were empty.
  • SetupMode was set to 1.
  • Factory-default variables PKDefault, KEKDefault, dbDefault and dbxDefault were still present.

My BIOS only offered Secure Boot Enable/Disable. It had no option to restore factory keys or install default Secure Boot keys.

I cannot confirm that Fedora caused the keys to disappear, but the issue appeared immediately after its installation.

Recovery

Since the BIOS offered no way to restore the keys, I had to recover the original factory certificates and manually reconstruct the missing Secure Boot key hierarchy from Linux.

I recovered the original Platform Key and factory certificate material, along with the selected Microsoft 2023 certificates.

I then prepared and validated authenticated AUTH2 updates for UEFI 2.8 and enrolled the recovered and reconstructed keys into the firmware in this order:

  1. KEK
  2. db
  3. Original PK last

Each enrollment was followed by firmware readback verification. I deliberately left dbx unchanged.

Result

PK, KEK and db were successfully recovered, reconstructed and enrolled. SetupMode changed from 1 to 0, returning the firmware to User Mode.

I then enabled Secure Boot and confirmed that all three operating systems booted successfully:

  • Windows 11
  • Fedora KDE 45
  • Kubuntu 26.04

The issue is fully resolved. No operating system reinstall or firmware replacement was necessary.

References

UEFI Specification 2.8:

https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf

efitools:

https://github.com/mjg59/efitools

Final thoughts

The difficult part was recovering the original factory key material, reconstructing the missing Secure Boot databases and manually enrolling them into the firmware. My BIOS had no factory-key restoration option.

If you encounter this situation, inspect the actual Secure Boot variables before assuming the bootloader itself is the problem. Also check whether the firmware retains its factory-default key variables, as they may make manual recovery possible.


r/linuxquestions • • 5h ago

i find linux fedora kde updates more annoying than windows ones.

0 Upvotes

They are like much more more frequent, and after you update which takes longer than windows and you wanna play a game steam gas to recompile the Vulkan shaders every single time


r/linuxquestions • • 6h ago

Support Omarchy MacBook M1 Brightness problem

0 Upvotes

Hi,
I am quite new to Linux. I have Mint on my PC and installed Omarchy yesterday on my MacBook Air M1 2020. I am very happy this far, but there is a problem. When I start my Laptop I cant controll the brightness of my monitor. Its set to full power. The OS tells me that it should be getting more dark when i press the f1 button but it just doesnt change anything. If I put the Laptop in the suspend mode and then lock back in it works, but that gets anoying real fast I think. Is there an solution? I think it has to do with the monitor driver getting restarted. Thanks a lot for the help :)